宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机招标公告重新招标第1次
发送至邮箱
宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机招标公告重新招标第1次
宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机招标公告
发布日期：2023-12-11
招标编号：0721-2340A047-G01-522
招标编号（国际招标网）：0721-*G0122
上海 (略) （以下称招标机构）受欧 (略) （以下称买方）委托，就其宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机所需的下列货物进行公开招标，邀请合格投标人进行网上电子投标。
标段编号：0721-2340A047-G01-522/01
标段名称：宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机
1．招标货物名称、数量、技术规格和资金来源：
招标货物名称：20辊轧机
数量：两套
技术规格：
（1）钢种：取向硅钢（硅含量≦3.5%）；
（2）热轧来料厚度（轧机入口）：0.4～3.0mm ，成品厚度（轧机出口）：0.15～1.6mm；
（3）钢卷内径：入口:508mm，出口：508mm；
（4）其它技术要求详见招标文件技术部分。
资金来源：现汇项目
2. 交货地点和交货时间：
交货地点：CIF中国上海港
交货时间：合同签订后第1台轧机内牌坊16.5个月内FOB；第2台轧机内牌坊19.5个月内FOB
3.*凡确认投标的投标人请登录中国国际招标网平台（http://**），务必在开标前注册为其会员并通过年检以获得投标资格，中标情况将在中国国际招标网公示。
宝华智慧招标共享平台http://**)和中国招标投标公共服务平台http://**) (略) 的招标项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后，投标人可在宝华智慧招标共享平台上购买招标文件进行投标和开标活动。
4. 购买招标文件时间：2023年12月12日起到2023年12月19日止。
5. 招标平台使用费：招标文件英文版及中文版一套（电子版），若中文和英文版有冲突以中文版为准。
2,000.00元人民币或330.00美元整。
招标文件均按标段进行计价出售，投标人成功购标后，自行下载招标文件和投标文件模板。招标文件一经售出不得退还。
6. 投标截止时间和开标时间：2024年01月02日09时00分（北京时间）。投标人应于投标截止时间前在宝华智慧招标共享平台成功递交所有电子投标文件。
7. 开标方式：一步法。
8. 开标地点：宝华智慧招标共享平台电子开标大厅。
9. *对投标人的资格要求：
（1）未被国家企业信用信息公示系统(http://**.cn)列入严重违法失信企业名单;
（2）未被“信用中国”网站(http://**.cn)列入失信被执行人名单;
（3）投标人必须是中国境内外依法成立的法人，不接受代理商投标；
（4）投标人应具有取向硅钢及高牌号无取向硅钢20辊单机架轧机设备的设计、设备供货和投运业绩；
（5）由于项目复杂，技术要求高，任何投标人希望参与本项目均应在开标前与招标人联系开展技术交流并签署技术附件，未能签订技术附件的投标人，其投标将被否决；技术附件签字必须在设备资材采购中心组织下完成；设备资材采购中心联系人：任经理，联系方式：*@*aosteel.com，电话：021-*。
（6）投标人必须同时参加本项目及招标编号为0721-2340A049-G01-522项目的投标，如不参加其中某个项目或某个项目的投标被否决，其他项目的投标也将被否决。
10. 本项目接受联合体投标。
11.招标人相关信息：
招标人联系人：任全民
招标人邮箱：*@*aosteel.com
招标人电话：*
12. 未领购招标文件的不得参加投标。
13. 客服热线：* （有关投标人CA办理事项的咨询）
传 真：021-*
网上购标方法：具体操作方法详见宝华招标网“操作指南”。
项目经理：刘中原 （有关商务、技术问题或招标文件异议可致电项目经理。）
电 话：021-*
电子邮件：*@*aosteel.com
业务咨询：021-*（业务咨询电话1）
招标机构地址： (略) 宝山区克山路550弄8号楼
购标时人民币付款采用第三方支付，外币付款可以汇款到相应外币账户内
开户银行（外币）：建行宝钢宝山支行
收 款 人：上海 (略)
账 号：
美元：*10041
Swift Code： PCBCCNBJSHX
Baoshan Iron & Steel Co., LTD Green Manufacturing Demonstration Project for Super High Grade Oriented Silicon Steel 8#/9# Single-stand 20-high Rolling Mill<="" p="">
Issue Date：2023-12-11
Tendering No：0721-2340A047-G01-522
Tendering No. (China International Bidding Website):0721-*G0122
Shanghai Baohua International Tendering Co., Ltd.(Hereinafter referred to as Tendering Agency) is commissioned by Baoshan Iron and Steel Co., LTD(Hereinafter referred to as tenderer) on Open Tendering for the following goods required in Baoshan Iron & Steel Co., LTD Green Manufacturing Demonstration Project for Super High Grade Oriented Silicon Steel 8#/9# Single-stand 20-high Rolling Mill invites eligible bidders to online e-bidding.
Bid section No：0721-2340A047-G01-522/01
Bid section Name：Baoshan Iron & Steel Co., LTD Green Manufacturing Demonstration Project for Super High Grade Oriented Silicon Steel 8#/9# Single-stand 20-high Rolling Mill
1． The name, quantity, technical specifications and fund sources of goods for tendering：
The name：20-high mill
Quantity：two sets
Technical specifications：
(1) Steel type: oriented silicon steel (silicon content ≦3.5%);
(2) Hot rolling incoming material thickness (mill inlet) : 0.4 ~ 3.0mm, finished product thickness (mill outlet) : 0.15 ~ 1.6mm;
(3) Inner diameter of steel coil: inlet :508mm, outlet :508mm;
(4) Other technical requirements are detailed in the technical section of the bidding documents.
Fund sources of goods：Cash items
2. Delivery time and place：
Delivery time：The first mill housing shall be within 16.5 months FOB after the Contract coming into effect. The second mill housing shall be within 19.5 months FOB after the Contract coming into effect
Delivery place：CIF Shanghai Port
3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website http://**), and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website.
Baohua E-bidding website http://**) and China Tendeing & Bidding Public Service Platform http://**) could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online.
4. Time for purchasing Tendering documents: Starting from：2023-12-12 to 2023-12-19 (Beijing time).
5. Sales prices of the tendering document: One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.Sales price is 2,000.00CNYor330.00USD
All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable.
6. Deadline for bid submission and Bid Opening Time：2024-01-02 09:00(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline.
7. Bid opening method ：One-step of opening。
8. E-bid opening place：Bid opening hall on Baohua Intelligent Bidding Integrated Platform。
9. *Requirements of Bidder’s qualification：
(1) Not included in the list of seriously illegal and dishonest enterprises by the national Enterprise Credit Information Publicity system (http://**.cn);
(2) Not included in the list of persons subject to enforcement for breach of trust by "Credit China" website (http://**.cn);
(3) Bidders must be legal persons legally established in China and beyond, and any agents are not accepted for bidding;
(4) The bidder shall have a performance in design and supply of 20-high single-stand rolling mills which have been put into operation. The performance list shall provide for bidding, as well as relevant supporting documents;
(5) Given the complexity and high technical requirements of the project, it is recommended that any bidder wishing to participate in the project shall have technical exchange meetings and sign technical agreements with the Tenderee before bid opening. Any bidder failing to sign such agreements will be rejected. Signing the technical agreement shall be organized by Equipment and Materials Procurement Center. Equipment and Materials Procurement Center Contact: Manager Ren, Contact: *@*aosteel.com, Tel: 021-*.
(6) The bidder must participate in the bidding of this project and the bidding No. 0721-2340A049-G01-522 project at the same time. If the bidder does not participate in one of the projects or the bid of one project is rejected, the bid of other projects will also be rejected.
10. This project consortium bidding is accepted
11.Information about the tenderer：
Tenderer contact：任全民
Tenderer"s mailbox：*@*aosteel.com
Tenderer telephone：*
12. Tel：* (consulting for bidders CA affairs)
Fax：021-*
Online tendering document purchase: please refer to "HELP" for details on Baohua tendering website.
Bid manager： (contact project leader for commercial, technical problems of tendering project, or objections to tendering documents)
Tel：021-*
E-mail：*@*aosteel.com
Bussiness Consulting Tel： 021-*（Bussiness Consulting Tel 1）
Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China
When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.
Bank account：China Construction Bank, Baoshan Baosteel Branch
Beneficiary：Shanghai Baohua International Tendering Co., Ltd.
Account Number
USD：*10041
Swift Code： PCBCCNBJSHX
宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机招标公告
发布日期：2023-12-11
招标编号：0721-2340A047-G01-522
招标编号（国际招标网）：0721-*G0122
上海 (略) （以下称招标机构）受欧 (略) （以下称买方）委托，就其宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机所需的下列货物进行公开招标，邀请合格投标人进行网上电子投标。
标段编号：0721-2340A047-G01-522/01
标段名称：宝钢股份超高等级取向硅钢绿色制造示范项目8#/9#单机架20辊轧机
1．招标货物名称、数量、技术规格和资金来源：
招标货物名称：20辊轧机
数量：两套
技术规格：
（1）钢种：取向硅钢（硅含量≦3.5%）；
（2）热轧来料厚度（轧机入口）：0.4～3.0mm ，成品厚度（轧机出口）：0.15～1.6mm；
（3）钢卷内径：入口:508mm，出口：508mm；
（4）其它技术要求详见招标文件技术部分。
资金来源：现汇项目
2. 交货地点和交货时间：
交货地点：CIF中国上海港
交货时间：合同签订后第1台轧机内牌坊16.5个月内FOB；第2台轧机内牌坊19.5个月内FOB
3.*凡确认投标的投标人请登录中国国际招标网平台（http://**），务必在开标前注册为其会员并通过年检以获得投标资格，中标情况将在中国国际招标网公示。
宝华智慧招标共享平台http://**)和中国招标投标公共服务平台http://**) (略) 的招标项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后，投标人可在宝华智慧招标共享平台上购买招标文件进行投标和开标活动。
4. 购买招标文件时间：2023年12月12日起到2023年12月19日止。
5. 招标平台使用费：招标文件英文版及中文版一套（电子版），若中文和英文版有冲突以中文版为准。
2,000.00元人民币或330.00美元整。
招标文件均按标段进行计价出售，投标人成功购标后，自行下载招标文件和投标文件模板。招标文件一经售出不得退还。
6. 投标截止时间和开标时间：2024年01月02日09时00分（北京时间）。投标人应于投标截止时间前在宝华智慧招标共享平台成功递交所有电子投标文件。
7. 开标方式：一步法。
8. 开标地点：宝华智慧招标共享平台电子开标大厅。
9. *对投标人的资格要求：
（1）未被国家企业信用信息公示系统(http://**.cn)列入严重违法失信企业名单;
（2）未被“信用中国”网站(http://**.cn)列入失信被执行人名单;
（3）投标人必须是中国境内外依法成立的法人，不接受代理商投标；
（4）投标人应具有取向硅钢及高牌号无取向硅钢20辊单机架轧机设备的设计、设备供货和投运业绩；
（5）由于项目复杂，技术要求高，任何投标人希望参与本项目均应在开标前与招标人联系开展技术交流并签署技术附件，未能签订技术附件的投标人，其投标将被否决；技术附件签字必须在设备资材采购中心组织下完成；设备资材采购中心联系人：任经理，联系方式：*@*aosteel.com，电话：021-*。
（6）投标人必须同时参加本项目及招标编号为0721-2340A049-G01-522项目的投标，如不参加其中某个项目或某个项目的投标被否决，其他项目的投标也将被否决。
10. 本项目接受联合体投标。
11.招标人相关信息：
招标人联系人：任全民
招标人邮箱：*@*aosteel.com
招标人电话：*
12. 未领购招标文件的不得参加投标。
13. 客服热线：* （有关投标人CA办理事项的咨询）
传 真：021-*
网上购标方法：具体操作方法详见宝华招标网“操作指南”。
项目经理：刘中原 （有关商务、技术问题或招标文件异议可致电项目经理。）
电 话：021-*
电子邮件：*@*aosteel.com
业务咨询：021-*（业务咨询电话1）
招标机构地址： (略) 宝山区克山路550弄8号楼
购标时人民币付款采用第三方支付，外币付款可以汇款到相应外币账户内
开户银行（外币）：建行宝钢宝山支行
收 款 人：上海 (略)
账 号：
美元：*10041
Swift Code： PCBCCNBJSHX
Baoshan Iron & Steel Co., LTD Green Manufacturing Demonstration Project for Super High Grade Oriented Silicon Steel 8#/9# Single-stand 20-high Rolling Mill<="" p="">
Issue Date：2023-12-11
Tendering No：0721-2340A047-G01-522
Tendering No. (China International Bidding Website):0721-*G0122
Shanghai Baohua International Tendering Co., Ltd.(Hereinafter referred to as Tendering Agency) is commissioned by Baoshan Iron and Steel Co., LTD(Hereinafter referred to as tenderer) on Open Tendering for the following goods required in Baoshan Iron & Steel Co., LTD Green Manufacturing Demonstration Project for Super High Grade Oriented Silicon Steel 8#/9# Single-stand 20-high Rolling Mill invites eligible bidders to online e-bidding.
Bid section No：0721-2340A047-G01-522/01
Bid section Name：Baoshan Iron & Steel Co., LTD Green Manufacturing Demonstration Project for Super High Grade Oriented Silicon Steel 8#/9# Single-stand 20-high Rolling Mill
1． The name, quantity, technical specifications and fund sources of goods for tendering：
The name：20-high mill
Quantity：two sets
Technical specifications：
(1) Steel type: oriented silicon steel (silicon content ≦3.5%);
(2) Hot rolling incoming material thickness (mill inlet) : 0.4 ~ 3.0mm, finished product thickness (mill outlet) : 0.15 ~ 1.6mm;
(3) Inner diameter of steel coil: inlet :508mm, outlet :508mm;
(4) Other technical requirements are detailed in the technical section of the bidding documents.
Fund sources of goods：Cash items
2. Delivery time and place：
Delivery time：The first mill housing shall be within 16.5 months FOB after the Contract coming into effect. The second mill housing shall be within 19.5 months FOB after the Contract coming into effect
Delivery place：CIF Shanghai Port
3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website http://**), and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website.
Baohua E-bidding website http://**) and China Tendeing & Bidding Public Service Platform http://**) could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online.
4. Time for purchasing Tendering documents: Starting from：2023-12-12 to 2023-12-19 (Beijing time).
5. Sales prices of the tendering document: One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.Sales price is 2,000.00CNYor330.00USD
All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable.
6. Deadline for bid submission and Bid Opening Time：2024-01-02 09:00(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline.
7. Bid opening method ：One-step of opening。
8. E-bid opening place：Bid opening hall on Baohua Intelligent Bidding Integrated Platform。
9. *Requirements of Bidder’s qualification：
(1) Not included in the list of seriously illegal and dishonest enterprises by the national Enterprise Credit Information Publicity system (http://**.cn);
(2) Not included in the list of persons subject to enforcement for breach of trust by "Credit China" website (http://**.cn);
(3) Bidders must be legal persons legally established in China and beyond, and any agents are not accepted for bidding;
(4) The bidder shall have a performance in design and supply of 20-high single-stand rolling mills which have been put into operation. The performance list shall provide for bidding, as well as relevant supporting documents;
(5) Given the complexity and high technical requirements of the project, it is recommended that any bidder wishing to participate in the project shall have technical exchange meetings and sign technical agreements with the Tenderee before bid opening. Any bidder failing to sign such agreements will be rejected. Signing the technical agreement shall be organized by Equipment and Materials Procurement Center. Equipment and Materials Procurement Center Contact: Manager Ren, Contact: *@*aosteel.com, Tel: 021-*.
(6) The bidder must participate in the bidding of this project and the bidding No. 0721-2340A049-G01-522 project at the same time. If the bidder does not participate in one of the projects or the bid of one project is rejected, the bid of other projects will also be rejected.
10. This project consortium bidding is accepted
11.Information about the tenderer：
Tenderer contact：任全民
Tenderer"s mailbox：*@*aosteel.com
Tenderer telephone：*
12. Tel：* (consulting for bidders CA affairs)
Fax：021-*
Online tendering document purchase: please refer to "HELP" for details on Baohua tendering website.
Bid manager： (contact project leader for commercial, technical problems of tendering project, or objections to tendering documents)
Tel：021-*
E-mail：*@*aosteel.com
Bussiness Consulting Tel： 021-*（Bussiness Consulting Tel 1）
Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China
When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.
Bank account：China Construction Bank, Baoshan Baosteel Branch
Beneficiary：Shanghai Baohua International Tendering Co., Ltd.
Account Number
USD：*10041
Swift Code： PCBCCNBJSHX
招投标大数据
最近搜索
无
热门搜索
无
