华锦精细化工及原料工程项目420万吨/年高丙烯催化裂化装置多点挠性热电偶-国际招标公告
华锦精细化工及原料工程项目420万吨/年高丙烯催化裂化装置多点挠性热电偶-国际招标公告
(略) 受招标人委托对下列产品及服务进行国际公开竞争性招标,于**在中国国际招标网公告。 本次招标采用传统招标方式,现邀请合格投标人参加投标。
1、招标条件
项目概况:项目 (略) (略) 辽东湾新区,建设规模主要为1500万吨/年炼油、165万吨/年*烯、200万吨/年对二*苯,下游规划有*烯和*烯产品链等
资金到位或资金来源落实情况:已落实
项目已具备招标条件的说明:商务、技术文件已确定,具备招标条件
2、招标内容:
招标项目编号:0747-2440SCCZS129
招标项目名称:华锦精细化工及原料工程项目420万吨/年高*烯催化裂化装置多点挠性热电偶
项目实施地点: (略)
招标产品列表(主要设备):
序号 产品名称 数量 简要技术规格 备注
1 多点挠性热电偶 2台 /
3、投标人资格要求
投标人应具备的资格或业绩:1)投标人具有有效的营业执照(境内投标人)/企业经营许可证明文件(境外投标人),需提供相应证明复印件; 2)投标人必须是制造商或代理商投标;若为代理商,需提供制造商出具的针对本项目的唯一授权函; 3)投标人所提供的产品应至少具有2套中华人民共和国境内炼化装置反应器同类设计工况下的供货业绩,其中每套业绩至少包含一个法兰尺寸不大于3”,压力等级不小于300Lb的业绩,且每支多点热电偶的测点不少于8点。(投标人所提供业绩中的多点挠性热电偶的密封腔密封形式必须跟此次采购的多点挠性热电偶要求的密封形式一致。) 须提供业绩表(包含业主联系人及联系方式)、合同复印件作为业绩证明材料。内容至少包括合同签订时间、装置名称、产品型号及数量、详细技术参数、产品结构图、签章页。若投标文件提供的业绩证明材料不满足上述要求,则视为无效业绩。 4)投标人及制造商未处于被中国石化给予风险停用、违约停用处理期内,以开标当日招标人现场查询为准。 5)投标人应当提供投标人开户银行在开标日前三个月内开具的资信证明原件或复印件; 6)投标人在投标前应在必联网(http://**)或机电产品招标投标电子交易平台(http://**)完成注册及信息核验。 7)本项目不接受联合体投标。
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:**
招标文件领购结束时间:**
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点:http://**
招标文件售价:¥200/$30
5、投标文件的递交
投标截止时间(开标时间):** 09:30
投标文件送达地点: (略) 丰台区平安幸福中心B座23层会议室。
开标地点: (略) 丰台区平安幸福中心B座23层会议室。
6、联系方式
招标人:中国 (略)
地址: (略) 朝阳区安慧北里安园21号楼
联系人:章琰
联系方式 :+86 *
招标代理机构: (略)
地址: (略) 丰台区平安幸福中心B座25层
联系人:徐墨林、令狐浚通
联系方式 :+86 */*
7、汇款方式
招标代理机构开户银行(人民币):
招标代理机构开户银行(美元):
账号(人民币):
账号(美元):
SINOCHEM COMMERCE CO.,LTD entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on http://** on **.
1.Bidding Conditions
Overview:Introduction of the bidding project: The project is located in Liaodong Bay New District, Panjin City, Liaoning Province, with 15 million t/a crude refining, 1.65 million t/a ethylene, 2 million t/a p-xylene, and downstream planning including ethylene and propylene product chain, etc.
Source of Funds::Implemented.
Description of The Prepared Bidding Conditions:The commercial and technical documents have been determined, and the bidding conditions have been met.
2.Bidding Content:
Bidding No:0747-2440SCCZS129
Project Name:Huajin Fine Chemicals and Raw Materials Project 4,200 KTA Pro-pylene Catalytic Cracking Unit Multi-point Flex Thermocouple
Place of Implementation:Liaoning Province, China
List of Products:
NO. Product Name Quantity Main Technical Data Remarks
1 Multi-point Flex Thermocouple 2 sets /
3.Qualification Requirements For Bidder
Qualifications or Performance:1)The bidder has a valid business license (bidder from within the territory of P.R.C.)/operation license (bidder from outside the territory of P.R.C.), and a copy of the corresponding certificate is required; 2)The bidder must be a manufacturer or an equipment agent; if the bidder is an equipment agent, sole authorization letter for the bid from the manufacturer is required; 3)The products provided by the bidder shall have at least 2 sets of People"s Re-public of China supply performance under the same design conditions of do-mestic refining and chemical unit reactors, of which each set of performance shall contain at least one flange size of no more than 3", the pressure level shall not be less than 300Lb, and the measurement point of each multi-point ther-mocouple shall not be less than 8 points. (The sealing form of the sealing cavity of the multi-point flexible http://** in the performance provided by the bidder must be consistent with the sealing form required by the multi-point flexible http://** procured this time.). It is necessary to provide a performance table (including the contact person and contact information of the end-user), and a copy of the contract as the perfor-mance supporting materials. All the materials should at least include the signing time of the contract, unit name, product model and quantity, detailed technical parameters, product structure diagram, and signed pages. If the performance supporting materials provided in the bidding documents does not meet the above requirements, it will be considered as invalid performance. 4)The bidder and the manufacturer are not in the period of risk suspension or default suspension given by Sinopec, and the on-site inquiry of the bidder on the date of bid opening shall prevail. 5)The bidder shall provide the bank reference letter issued within three 3 months prior to the time of bid opening in original or its copy; 6)The bidder needs to register and verifications before the tender on http://** or http://**. 7)The consortium will not be accepted.
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4.Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:**
Ending of Selling Bidding Documents:**
Sell bidding doc online or not:No
To Obtain:On-site Purchase
Place:http://**
Price of Bidding Documents: ¥200/$30
Additional Instructions:
5.Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):** 09:30
Place of Bid:Meeting room, 23F, Pingan Fortune Center Block B, Fengtai District, Beijing.
Place of Bid Opening:Meeting room, 23F, Pingan Fortune Center Block B, Fengtai District, Beijing.
6.Contact Details
Purchasers:SINOPEC Engineering Incorporation
Add.:Anhui North Garden, 21, Chaoyang District, Beijing, P.R. China.
Contact:Zhang Yan
Tel:+86 *
Bidding Agency:SINOCHEM COMMERCE CO.,LTD
Add.:25th Floor, PINGAN Fortune Center Block B, Beijing, P.R. China.
Contact:Xu Molin, Linghu Juntong
Tel :+86 */*
7.Remittance Approach
Bank(RMB):
Bank(USD):
Account NO.(RMB):
Account NO.(USD):
(略) 受招标人委托对下列产品及服务进行国际公开竞争性招标,于**在中国国际招标网公告。 本次招标采用传统招标方式,现邀请合格投标人参加投标。
1、招标条件
项目概况:项目 (略) (略) 辽东湾新区,建设规模主要为1500万吨/年炼油、165万吨/年*烯、200万吨/年对二*苯,下游规划有*烯和*烯产品链等
资金到位或资金来源落实情况:已落实
项目已具备招标条件的说明:商务、技术文件已确定,具备招标条件
2、招标内容:
招标项目编号:0747-2440SCCZS129
招标项目名称:华锦精细化工及原料工程项目420万吨/年高*烯催化裂化装置多点挠性热电偶
项目实施地点: (略)
招标产品列表(主要设备):
序号 产品名称 数量 简要技术规格 备注
1 多点挠性热电偶 2台 /
3、投标人资格要求
投标人应具备的资格或业绩:1)投标人具有有效的营业执照(境内投标人)/企业经营许可证明文件(境外投标人),需提供相应证明复印件; 2)投标人必须是制造商或代理商投标;若为代理商,需提供制造商出具的针对本项目的唯一授权函; 3)投标人所提供的产品应至少具有2套中华人民共和国境内炼化装置反应器同类设计工况下的供货业绩,其中每套业绩至少包含一个法兰尺寸不大于3”,压力等级不小于300Lb的业绩,且每支多点热电偶的测点不少于8点。(投标人所提供业绩中的多点挠性热电偶的密封腔密封形式必须跟此次采购的多点挠性热电偶要求的密封形式一致。) 须提供业绩表(包含业主联系人及联系方式)、合同复印件作为业绩证明材料。内容至少包括合同签订时间、装置名称、产品型号及数量、详细技术参数、产品结构图、签章页。若投标文件提供的业绩证明材料不满足上述要求,则视为无效业绩。 4)投标人及制造商未处于被中国石化给予风险停用、违约停用处理期内,以开标当日招标人现场查询为准。 5)投标人应当提供投标人开户银行在开标日前三个月内开具的资信证明原件或复印件; 6)投标人在投标前应在必联网(http://**)或机电产品招标投标电子交易平台(http://**)完成注册及信息核验。 7)本项目不接受联合体投标。
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:**
招标文件领购结束时间:**
是否在线售卖标书:否
获取招标文件方式:现场领购
招标文件领购地点:http://**
招标文件售价:¥200/$30
5、投标文件的递交
投标截止时间(开标时间):** 09:30
投标文件送达地点: (略) 丰台区平安幸福中心B座23层会议室。
开标地点: (略) 丰台区平安幸福中心B座23层会议室。
6、联系方式
招标人:中国 (略)
地址: (略) 朝阳区安慧北里安园21号楼
联系人:章琰
联系方式 :+86 *
招标代理机构: (略)
地址: (略) 丰台区平安幸福中心B座25层
联系人:徐墨林、令狐浚通
联系方式 :+86 */*
7、汇款方式
招标代理机构开户银行(人民币):
招标代理机构开户银行(美元):
账号(人民币):
账号(美元):
SINOCHEM COMMERCE CO.,LTD entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on http://** on **.
1.Bidding Conditions
Overview:Introduction of the bidding project: The project is located in Liaodong Bay New District, Panjin City, Liaoning Province, with 15 million t/a crude refining, 1.65 million t/a ethylene, 2 million t/a p-xylene, and downstream planning including ethylene and propylene product chain, etc.
Source of Funds::Implemented.
Description of The Prepared Bidding Conditions:The commercial and technical documents have been determined, and the bidding conditions have been met.
2.Bidding Content:
Bidding No:0747-2440SCCZS129
Project Name:Huajin Fine Chemicals and Raw Materials Project 4,200 KTA Pro-pylene Catalytic Cracking Unit Multi-point Flex Thermocouple
Place of Implementation:Liaoning Province, China
List of Products:
NO. Product Name Quantity Main Technical Data Remarks
1 Multi-point Flex Thermocouple 2 sets /
3.Qualification Requirements For Bidder
Qualifications or Performance:1)The bidder has a valid business license (bidder from within the territory of P.R.C.)/operation license (bidder from outside the territory of P.R.C.), and a copy of the corresponding certificate is required; 2)The bidder must be a manufacturer or an equipment agent; if the bidder is an equipment agent, sole authorization letter for the bid from the manufacturer is required; 3)The products provided by the bidder shall have at least 2 sets of People"s Re-public of China supply performance under the same design conditions of do-mestic refining and chemical unit reactors, of which each set of performance shall contain at least one flange size of no more than 3", the pressure level shall not be less than 300Lb, and the measurement point of each multi-point ther-mocouple shall not be less than 8 points. (The sealing form of the sealing cavity of the multi-point flexible http://** in the performance provided by the bidder must be consistent with the sealing form required by the multi-point flexible http://** procured this time.). It is necessary to provide a performance table (including the contact person and contact information of the end-user), and a copy of the contract as the perfor-mance supporting materials. All the materials should at least include the signing time of the contract, unit name, product model and quantity, detailed technical parameters, product structure diagram, and signed pages. If the performance supporting materials provided in the bidding documents does not meet the above requirements, it will be considered as invalid performance. 4)The bidder and the manufacturer are not in the period of risk suspension or default suspension given by Sinopec, and the on-site inquiry of the bidder on the date of bid opening shall prevail. 5)The bidder shall provide the bank reference letter issued within three 3 months prior to the time of bid opening in original or its copy; 6)The bidder needs to register and verifications before the tender on http://** or http://**. 7)The consortium will not be accepted.
Joint Bids:NOT Available
Bid without the bidding documents:NOT Available
4.Acquisition of Bidding Documents
Beginning of Selling Bidding Documents:**
Ending of Selling Bidding Documents:**
Sell bidding doc online or not:No
To Obtain:On-site Purchase
Place:http://**
Price of Bidding Documents: ¥200/$30
Additional Instructions:
5.Bid Submission
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):** 09:30
Place of Bid:Meeting room, 23F, Pingan Fortune Center Block B, Fengtai District, Beijing.
Place of Bid Opening:Meeting room, 23F, Pingan Fortune Center Block B, Fengtai District, Beijing.
6.Contact Details
Purchasers:SINOPEC Engineering Incorporation
Add.:Anhui North Garden, 21, Chaoyang District, Beijing, P.R. China.
Contact:Zhang Yan
Tel:+86 *
Bidding Agency:SINOCHEM COMMERCE CO.,LTD
Add.:25th Floor, PINGAN Fortune Center Block B, Beijing, P.R. China.
Contact:Xu Molin, Linghu Juntong
Tel :+86 */*
7.Remittance Approach
Bank(RMB):
Bank(USD):
Account NO.(RMB):
Account NO.(USD):
最近搜索
无
热门搜索
无