【烧结厂、炼铁厂输送带一批】Bidding announcement

release time：2022-10-11 10:31:08

Project in progress2022-10-17 08:00:00

I、Project overview

Item number：ZBCG*
Project name：烧结厂、炼铁厂输送带一批
project type：Directional bidding
Issued by：Delong steel
Released by：Supply dept.

II、Bidder must log inthe cloud procurement bidding platformBe sure to complete the registration and obtain bidding qualification before the bid opening to conduct bidding and bid opening activities. The bid winning situation will be announced on this website.

III、Online bidding method: For specific steps, please refer to the "Service Guide" on the homepage of the website.

IV、Bid bond payment information

1、margin（yuan）：*.0
2、Account name：
3、account opening bank：
4、Account number：
5、Row number：
6、In case of any conflict between the above contents and the contents of bidding documents, the contents of bidding documents shall prevail.

V、Bid deadline and opening time

1、Bid deadline：2022-10-17 08:00:00
2、bid opening time：2022-10-17 08:00:06
3、Bidders shall successfully submit all electronic bidding documents on the cloud procurement bidding platform before the bid deadline, and overdue will not be accepted.

VI、attachment information

Title	Relevant documents

VII、Clarification attachment

Title	Relevant documents

、Target information

material code	material name	specification and model	Unit of measurement	purchase quantity	used by	Requirement note
10.261.107.0111	耐热聚酯帆布带	规格:900*5（6+2）;温度要求:175℃;材质:聚酯帆布;所属设备型号:无;带宽:900;层数:5;型号:EP-200;下胶厚度:2;上胶厚度:6;备注:无	米	300	?检修车间?
10.261.107.0108	聚酯帆布带	规格:900*5（6+2）;温度要求:常温;材质:聚酯帆布;所属设备型号:无;带宽:900;层数:5;型号:EP-100;下胶厚度:2;上胶厚度:6;备注:无	米	130	?检修车间?
10.261.107.0252	耐热聚酯帆布带	规格:B800*4(5+2) EP-200;温度要求:300℃;材质:聚酯帆布;所属设备型号:无;带宽:800;层数:4;型号:EP-200;下胶厚度:2;上胶厚度:5;备注:带配套粘皮带用胶片，胶浆;	米	200	?检修车间?
10.261.135.0005	双 (略) 钢丝绳芯胶带	型号:型号:450×（5+2）（5+5）*90米;带宽:450;上胶厚度:5;下胶厚度:5;钢丝直径:6;拉力强度:ST1600;备注:厂家钻料斗孔,横向孔距100mm*4个孔,纵向孔距320mm,耐温180度;;	条	1	?微粉车间?	配带：全套料斗螺栓（包含双螺母及碗型垫），皮带接头（包含接头用螺栓及辅料），全套胶垫。厂家负责拆除旧皮带、更换新皮带、安装调试。
10.261.107.0184	耐热聚酯帆布带	规格:B650*4(4.5+1.5) EP-200;温度要求:175℃;材质:聚酯帆布;所属设备型号:无;带宽:650;层数:4;型号:EP200;下胶厚度:1.5;上胶厚度:4.5;备注:带配套粘皮带用胶片，胶浆;	米	186	?检修车间?
10.261.134.0011	大倾角皮带	隔板间距:252mm;温度要求:无;挡边高度:80;层数:5;型号:B650*5（4.5+1.5）;下胶厚度:1.5;上胶厚度:4.5;隔板高度:75;带宽:650;	条	1	?检修车间?

【烧结厂、炼铁厂输送带一批】Bidding announcement

release time：2022-10-11 10:31:08

Project in progress2022-10-17 08:00:00

I、Project overview

Item number：ZBCG*
Project name：烧结厂、炼铁厂输送带一批
project type：Directional bidding
Issued by：Delong steel
Released by：Supply dept.

II、Bidder must log inthe cloud procurement bidding platformBe sure to complete the registration and obtain bidding qualification before the bid opening to conduct bidding and bid opening activities. The bid winning situation will be announced on this website.

III、Online bidding method: For specific steps, please refer to the "Service Guide" on the homepage of the website.

IV、Bid bond payment information

1、margin（yuan）：*.0
2、Account name：
3、account opening bank：
4、Account number：
5、Row number：
6、In case of any conflict between the above contents and the contents of bidding documents, the contents of bidding documents shall prevail.

V、Bid deadline and opening time

1、Bid deadline：2022-10-17 08:00:00
2、bid opening time：2022-10-17 08:00:06
3、Bidders shall successfully submit all electronic bidding documents on the cloud procurement bidding platform before the bid deadline, and overdue will not be accepted.

VI、attachment information

Title	Relevant documents

VII、Clarification attachment

Title	Relevant documents

、Target information

material code	material name	specification and model	Unit of measurement	purchase quantity	used by	Requirement note
10.261.107.0111	耐热聚酯帆布带	规格:900*5（6+2）;温度要求:175℃;材质:聚酯帆布;所属设备型号:无;带宽:900;层数:5;型号:EP-200;下胶厚度:2;上胶厚度:6;备注:无	米	300	?检修车间?
10.261.107.0108	聚酯帆布带	规格:900*5（6+2）;温度要求:常温;材质:聚酯帆布;所属设备型号:无;带宽:900;层数:5;型号:EP-100;下胶厚度:2;上胶厚度:6;备注:无	米	130	?检修车间?
10.261.107.0252	耐热聚酯帆布带	规格:B800*4(5+2) EP-200;温度要求:300℃;材质:聚酯帆布;所属设备型号:无;带宽:800;层数:4;型号:EP-200;下胶厚度:2;上胶厚度:5;备注:带配套粘皮带用胶片，胶浆;	米	200	?检修车间?
10.261.135.0005	双 (略) 钢丝绳芯胶带	型号:型号:450×（5+2）（5+5）*90米;带宽:450;上胶厚度:5;下胶厚度:5;钢丝直径:6;拉力强度:ST1600;备注:厂家钻料斗孔,横向孔距100mm*4个孔,纵向孔距320mm,耐温180度;;	条	1	?微粉车间?	配带：全套料斗螺栓（包含双螺母及碗型垫），皮带接头（包含接头用螺栓及辅料），全套胶垫。厂家负责拆除旧皮带、更换新皮带、安装调试。
10.261.107.0184	耐热聚酯帆布带	规格:B650*4(4.5+1.5) EP-200;温度要求:175℃;材质:聚酯帆布;所属设备型号:无;带宽:650;层数:4;型号:EP200;下胶厚度:1.5;上胶厚度:4.5;备注:带配套粘皮带用胶片，胶浆;	米	186	?检修车间?
10.261.134.0011	大倾角皮带	隔板间距:252mm;温度要求:无;挡边高度:80;层数:5;型号:B650*5（4.5+1.5）;下胶厚度:1.5;上胶厚度:4.5;隔板高度:75;带宽:650;	条	1	?检修车间?