电子程控式弯折拉压万能试验机招标变更
发送至邮箱
电子程控式弯折拉压万能试验机招标变更
| (略) （查看原公告） | |||
| 变更日期： 点击查看>> 08:24:13 | |||
| 变更说明：【投标截止(第一步开标)时间】 从 【 点击查看>> 09:00】 变更为 【 点击查看>> 09:35】;【招标文件停止发售日期】 | |||
| 招标编号： 点击查看>> GW470/01 | |||
| (略) 有限公司(以下称招标机构)受宝 (略) （ (略) ）(以下称买方)委托， (略) ，邀请合 (略) 网上电子投标。 | |||
| 1. | 招标货物名称、数量、技术规格和资金来源： | ||
| 1)货物名称：电子程控式弯折拉压万能试验机; | |||
| 2)数量：1; | |||
| 3)主要技术参数：3.1硬件配置的技术要求： * 总体要求：150kN电子拉伸结构，弯曲、折弯、拉伸与压缩在 (略) 。试验机具有高刚度框架(机架刚度≥300KN/mm)，运行噪音低，全数字化测试及控制系统，自动校零，自动校正测试信号。预应力无间隙滚珠丝杠，保证十字头精密位移，消除弹性间隙。 3.1.1基本硬件配置的主要技术要求： * 3.1.1.1、150kN载荷传感器： 力值精度±0.5％（范围下限≤1％FS）；分辨力≤0.1N。注： (略) 商的拉伸试验机产品系列中没有150kN，允许提供200kN拉伸试验机 * 横梁位移速度：0. * mm/min，横梁位移速度精度：误差≤±0.1％， *有效测试空间宽度：≥600mm *有效测试空间高度（含夹具）：不小于700mm * 横梁位置测量精度：误差≤±0.02 mm或 ±0.05％，分辨力≤0.01mm。 * (略) 程≥1000mm，采样频率>5000Hz。; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 2. | 交货地点和交货时间： | ||
| 1)交货地点： (略) 港 | |||
| 2)交货时间：合同签订后6个月FOB。 | |||
| 3. | * (略) 网(http:/ 点击查看>> )，务必在开标前注册为其会员并通过年检以获得投标资格， (略) 网公示。 | ||
| 4. | (略) 网(http:/ 点击查看>> ) (略) 项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后， (略) 文件，进行投标和开标活动。 | ||
| 5. | 购买招标文件时间： | ||
| 1)购买招标文件时间： 点击查看>> ~ 点击查看>> | |||
| 6. | 招标文件售价：招标文件英文版及中文版一套（电子版），若中文和英文版有冲突以中文版为准。 | ||
| 售价为人民币1000元或125美元整。 | |||
| 招标文 (略) 计价出售，投标人成功购标后， (略) 文件和投标文件模板。招标文件一经售出不得退还。 | |||
| 7. | 投标截止时间和开标时间： | ||
| 1)投标截止时间： 点击查看>> 09:35（ (略) 时间）。 (略) (略) 有电子投标文件。 | |||
| 8. | 开标方式： 电子 一步法 | ||
| 9. | 开标信息： | ||
| 1)第一步开标时间：同投标截止时间（ (略) 时间）。 | |||
| 2)开标地点： (略) 本项目开标大厅 | |||
| 10. | *投标条件及资格要求： | ||
| 1)投标条件及资格要求：*投标设备应达到国际先进水平，且在国际上被认可，为引进设备。投标时提供近三年的同类型产品的合同及业绩证明（业绩证明需包括合同复印件）。 * (略) 文件的要求。 *投标人为代理商时，需提供制造商独家代理授权证明， (略) (略) 外汇签约资质。 | |||
| 11. | 联合体投标： | ||
| 本项目不允许联合体投标 | |||
| 12. | 客服热线： 点击查看>> 2 （有关投标人CA (略) ） | ||
| 传真： 点击查看>> | |||
| 网上购标方法： (略) 网“操作指南”。 | |||
| 项目经理：李小兵（有关招标项目商务、技术问题可致电项目经理。） | |||
| 电 话： 点击查看>> | |||
| 传 真： 点击查看>> | |||
| 电子邮件： * ao 点击查看>> | |||
| 业务室助理：朱凤 | |||
| 业务室助理联系电话： 点击查看>> | |||
| 招标机构地址： (略) 市 (略) 区克山路550弄果园公寓8号楼 | |||
| 邮编： 点击查看>> | |||
| 收 款 人： (略) 有限公司 | |||
| (略) ：建行 (略) | |||
| (略) 账号： 点击查看>> | |||
| (略) 账号： 点击查看>> | |||
| (略) 账号 点击查看>> | |||
| (略) 账号： 点击查看>> | |||
| Swift Code：PCBCCNBJSHX | |||
| Changed Date： 点击查看>> 08:24:13 | |||
| Changed content： | |||
| Tendering No.： 点击查看>> GW470 | |||
| (略) 有限公司（Hereinafter referred to as Tendering Agency）is commissioned by（Hereinafter referred to as tenderer）on international open bidding for the following goods required inElectronic programmable bending pressure universal testing machineand invites eligible bidders to online e-bidding。 | |||
| 1. | The name, quantity, technical specifications and fund sources of goods for tendering： | ||
| 1)The name：Electronic programmable bending pressure universal testing machine; | |||
| 2)quantity：1; | |||
| 3)technical specifications：3.1 Technical requirement of hardware configuration: * General requirement: 150kN electronic tensile structure, bending, stretching compression in the same space. The testing machine has high rigidity frame (stand rigidity ≥300KN/mm), low operation noise, full digital test and control system, automatic zero calibration, automatic calibration of test signal. The prestress without gap ball screw to ensure the precise displacement of cross head , to eliminate the elastic gap. 3.1.1 Main technical requirement of basic hardware configuration: * 3.1.1.1、150kN load sensor: force accuracy ±0.5％(Range lower limit ≤1％FS); resolution≤0.1N。 Note: If the manufacturers of tensile testing machine product line has not 150kN, 200kN tensile testing machine is allowed to be supplied. * Beam displacement speed：0. * mm/min， Beam displacement speed accuracy: error ≤±0.1％， *Valid test space width：≥600mm *Valid test space width (including clamp): not less than 700mm * Beam position measurement accuracy：error ≤±0.02mm or ±0.05％, resolution≤0.01mm。 * Beam travel≥1000mm, sampling frequency >5000Hz; | |||
| 4)fund sources of goods for tendering：Self-raised funds(Cash items); | |||
| 2. | Delivery time and place： | ||
| 1)Delivery place：shanghai port | |||
| 2)Delivery time：The equipment delivery schedule: FOB 6 months after contract signing. | |||
| 3. | *The bidders who have confirmed to participate the bid must log on China International Bidding Website(http:/ 点击查看>> ))，and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website. | ||
| 4. | Baohua E-bidding website http:/ 点击查看>> )is a computer system on which the bidder can purchase bid and submit bid affter log in using its company authority. | ||
| 5. | Time for purchasing Tendering Documents： | ||
| Time for purchasing Tendering Documents： 点击查看>> ~ 点击查看>> (9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| 6. | Sales prices of the tendering document：tendering document in English and Chinese version (including electronic version). The Chinese version shall govern in case of any discrepancy between the Chinese version and the English version. | ||
| Sales price is RMB 1000 or USD 125。 | |||
| All tendering documents will be sold by bid package (or section).After purchasing the bid, the bidder can download the tendering document and the template of bidding document. No refund of the tendering document after sale. | |||
| 7. | Deadline for submission of bid and Bid Opening Time： | ||
| 1)Deadline for bid submission and Bid Opening Time： 点击查看>> 09:35 (Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| 8. | Bid opening style： E-bidding One-step of opening | ||
| 9. | Biding opening place： | ||
| 1)First Bid Opening Time： 点击查看>> 09:35 | |||
| 2) E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| 10. | *Requirements of Bidder’s qualification： | ||
| 1)Requirements of Bidder’s qualification：*The tendering equipment should reach the international advanced level, and recognized internationally, should be the imported equipment. When bidding, the bidder shall provide the contract and performance certificate of the same type of product in recent three years (proof of performance should include a copy of the contract). *The scope of supply of the equipment supplied by the bidder shall not less than the requirement stipulated in the tendering document. *When the bidder is an agent, the sole agent's authorization certificate of the manufacturer shall be provided, and the bidder shall have the qualification of foreign exchange registration. | |||
| 11. | Bidding consortium： | ||
| This project no consortium bidding is accepted | |||
| 12. | Customer service hotline： 点击查看>> 2(consulting for bidders CA affairs) | ||
| Fax： 点击查看>> | |||
| Online tendering document purchase：please refer to "HELP" for details on Baohua tendering website. | |||
| Project manager：Li Xiaobing(contact project leader for commercial, technical problems of tendering project) | |||
| Tel： 点击查看>> | |||
| Fax： 点击查看>> | |||
| E-mail： * ao 点击查看>> | |||
| Business assistant：Zhu Feng | |||
| Tel： 点击查看>> | |||
| Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China | |||
| Post code： 点击查看>> | |||
| payee： Shanghai Baohua International Tendering Co., Ltd. | |||
| Accounting Bank：China Construction Bank Baoshan Branch | |||
| RMB Accounting Number: 点击查看>> | |||
| EUR Accounting Number 点击查看>> | |||
| USD Accounting Number： 点击查看>> | |||
| JPY Accounting Number： 点击查看>> | |||
| Swift Code：PCBCCNBJSHX | |||
| (略) （查看原公告） | |||
| 变更日期： 点击查看>> 08:24:13 | |||
| 变更说明：【投标截止(第一步开标)时间】 从 【 点击查看>> 09:00】 变更为 【 点击查看>> 09:35】;【招标文件停止发售日期】 | |||
| 招标编号： 点击查看>> GW470/01 | |||
| (略) 有限公司(以下称招标机构)受宝 (略) （ (略) ）(以下称买方)委托， (略) ，邀请合 (略) 网上电子投标。 | |||
| 1. | 招标货物名称、数量、技术规格和资金来源： | ||
| 1)货物名称：电子程控式弯折拉压万能试验机; | |||
| 2)数量：1; | |||
| 3)主要技术参数：3.1硬件配置的技术要求： * 总体要求：150kN电子拉伸结构，弯曲、折弯、拉伸与压缩在 (略) 。试验机具有高刚度框架(机架刚度≥300KN/mm)，运行噪音低，全数字化测试及控制系统，自动校零，自动校正测试信号。预应力无间隙滚珠丝杠，保证十字头精密位移，消除弹性间隙。 3.1.1基本硬件配置的主要技术要求： * 3.1.1.1、150kN载荷传感器： 力值精度±0.5％（范围下限≤1％FS）；分辨力≤0.1N。注： (略) 商的拉伸试验机产品系列中没有150kN，允许提供200kN拉伸试验机 * 横梁位移速度：0. * mm/min，横梁位移速度精度：误差≤±0.1％， *有效测试空间宽度：≥600mm *有效测试空间高度（含夹具）：不小于700mm * 横梁位置测量精度：误差≤±0.02 mm或 ±0.05％，分辨力≤0.01mm。 * (略) 程≥1000mm，采样频率>5000Hz。; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 2. | 交货地点和交货时间： | ||
| 1)交货地点： (略) 港 | |||
| 2)交货时间：合同签订后6个月FOB。 | |||
| 3. | * (略) 网(http:/ 点击查看>> )，务必在开标前注册为其会员并通过年检以获得投标资格， (略) 网公示。 | ||
| 4. | (略) 网(http:/ 点击查看>> ) (略) 项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后， (略) 文件，进行投标和开标活动。 | ||
| 5. | 购买招标文件时间： | ||
| 1)购买招标文件时间： 点击查看>> ~ 点击查看>> | |||
| 6. | 招标文件售价：招标文件英文版及中文版一套（电子版），若中文和英文版有冲突以中文版为准。 | ||
| 售价为人民币1000元或125美元整。 | |||
| 招标文 (略) 计价出售，投标人成功购标后， (略) 文件和投标文件模板。招标文件一经售出不得退还。 | |||
| 7. | 投标截止时间和开标时间： | ||
| 1)投标截止时间： 点击查看>> 09:35（ (略) 时间）。 (略) (略) 有电子投标文件。 | |||
| 8. | 开标方式： 电子 一步法 | ||
| 9. | 开标信息： | ||
| 1)第一步开标时间：同投标截止时间（ (略) 时间）。 | |||
| 2)开标地点： (略) 本项目开标大厅 | |||
| 10. | *投标条件及资格要求： | ||
| 1)投标条件及资格要求：*投标设备应达到国际先进水平，且在国际上被认可，为引进设备。投标时提供近三年的同类型产品的合同及业绩证明（业绩证明需包括合同复印件）。 * (略) 文件的要求。 *投标人为代理商时，需提供制造商独家代理授权证明， (略) (略) 外汇签约资质。 | |||
| 11. | 联合体投标： | ||
| 本项目不允许联合体投标 | |||
| 12. | 客服热线： 点击查看>> 2 （有关投标人CA (略) ） | ||
| 传真： 点击查看>> | |||
| 网上购标方法： (略) 网“操作指南”。 | |||
| 招标机构购标联系人：部门助理 | |||
| 招标机构购标电话： 点击查看>> 2 | |||
| 招标机构购标传真： 点击查看>> 91125 | |||
| 项目经理：李小兵（有关招标项目商务、技术问题可致电项目经理。） | |||
| 电 话： 点击查看>> | |||
| 传 真： 点击查看>> | |||
| 电子邮件： * ao 点击查看>> | |||
| 业务室助理：朱凤 | |||
| 业务室助理联系电话： 点击查看>> | |||
| 招标机构地址： (略) 市 (略) 区克山路550弄果园公寓8号楼 | |||
| 邮编： 点击查看>> | |||
| 收 款 人： (略) 有限公司 | |||
| (略) ：建行 (略) | |||
| (略) 账号： 点击查看>> | |||
| (略) 账号： 点击查看>> | |||
| (略) 账号 点击查看>> | |||
| (略) 账号： 点击查看>> | |||
| Swift Code：PCBCCNBJSHX | |||
| Changed Date： 点击查看>> 08:24:13 | |||
| Changed content： | |||
| Tendering No.： 点击查看>> GW470 | |||
| (略) 有限公司（Hereinafter referred to as Tendering Agency）is commissioned by（Hereinafter referred to as tenderer）on international open bidding for the following goods required inElectronic programmable bending pressure universal testing machineand invites eligible bidders to online e-bidding。 | |||
| 1. | The name, quantity, technical specifications and fund sources of goods for tendering： | ||
| 1)The name：Electronic programmable bending pressure universal testing machine; | |||
| 2)quantity：1; | |||
| 3)technical specifications：3.1 Technical requirement of hardware configuration: * General requirement: 150kN electronic tensile structure, bending, stretching compression in the same space. The testing machine has high rigidity frame (stand rigidity ≥300KN/mm), low operation noise, full digital test and control system, automatic zero calibration, automatic calibration of test signal. The prestress without gap ball screw to ensure the precise displacement of cross head , to eliminate the elastic gap. 3.1.1 Main technical requirement of basic hardware configuration: * 3.1.1.1、150kN load sensor: force accuracy ±0.5％(Range lower limit ≤1％FS); resolution≤0.1N。 Note: If the manufacturers of tensile testing machine product line has not 150kN, 200kN tensile testing machine is allowed to be supplied. * Beam displacement speed：0. * mm/min， Beam displacement speed accuracy: error ≤±0.1％， *Valid test space width：≥600mm *Valid test space width (including clamp): not less than 700mm * Beam position measurement accuracy：error ≤±0.02mm or ±0.05％, resolution≤0.01mm。 * Beam travel≥1000mm, sampling frequency >5000Hz; | |||
| 4)fund sources of goods for tendering：Self-raised funds(Cash items); | |||
| 2. | Delivery time and place： | ||
| 1)Delivery place：shanghai port | |||
| 2)Delivery time：The equipment delivery schedule: FOB 6 months after contract signing. | |||
| 3. | *The bidders who have confirmed to participate the bid must log on China International Bidding Website(http:/ 点击查看>> ))，and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website. | ||
| 4. | Baohua E-bidding website http:/ 点击查看>> )is a computer system on which the bidder can purchase bid and submit bid affter log in using its company authority. | ||
| 5. | Time for purchasing Tendering Documents： | ||
| Time for purchasing Tendering Documents： 点击查看>> ~ 点击查看>> (9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| 6. | Sales prices of the tendering document：tendering document in English and Chinese version (including electronic version). The Chinese version shall govern in case of any discrepancy between the Chinese version and the English version. | ||
| Sales price is RMB 1000 or USD 125。 | |||
| All tendering documents will be sold by bid package (or section).After purchasing the bid, the bidder can download the tendering document and the template of bidding document. No refund of the tendering document after sale. | |||
| 7. | Deadline for submission of bid and Bid Opening Time： | ||
| 1)Deadline for bid submission and Bid Opening Time： 点击查看>> 09:35 (Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| 8. | Bid opening ： E-bidding One-step of opening | ||
| 9. | Biding opening place： | ||
| 1)First Bid Opening Time： 点击查看>> 09:35 | |||
| 2) E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| 10. | *Requirements of Bidder’s qualification： | ||
| 1)Requirements of Bidder’s qualification：*The tendering equipment should reach the international advanced level, and recognized internationally, should be the imported equipment. When bidding, the bidder shall provide the contract and performance certificate of the same type of product in recent three years (proof of performance should include a copy of the contract). *The scope of supply of the equipment supplied by the bidder shall not less than the requirement stipulated in the tendering document. *When the bidder is an agent, the sole agent's authorization certificate of the manufacturer shall be provided, and the bidder shall have the qualification of foreign exchange registration. | |||
| 11. | Bidding consortium： | ||
| This project no consortium bidding is accepted | |||
| 12. | Customer service hotline： 点击查看>> 2(consulting for bidders CA affairs) | ||
| Fax： 点击查看>> | |||
| Online tendering document purchase：please refer to "HELP" for details on Baohua tendering website. | |||
| tender order manager：assistance | |||
| tender order telephone： 点击查看>> 2 | |||
| tender order fax： 点击查看>> 91125 | |||
| Project manager：Li Xiaobing(contact project leader for commercial, technical problems of tendering project) | |||
| Tel： 点击查看>> | |||
| Fax： 点击查看>> | |||
| E-mail： * ao 点击查看>> | |||
| Business assistant：Zhu Feng | |||
| Tel： 点击查看>> | |||
| Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China | |||
| Post code： 点击查看>> | |||
| payee： Shanghai Baohua International Tendering Co., Ltd. | |||
| Accounting Bank：China Construction Bank Baoshan Branch | |||
| RMB Accounting Number: 点击查看>> | |||
| EUR Accounting Number 点击查看>> | |||
| USD Accounting Number： 点击查看>> | |||
| JPY Accounting Number： 点击查看>> | |||
| Swift Code：PCBCCNBJSHX | |||
上海
上海
上海
上海
上海
上海
招投标大数据
最近搜索
无
热门搜索
无
