江西锦溪塑料制品有限公司年产18亿条方底阀口塑料编织袋智能化技术改造项目引进设备（第二次）招标公告
江西锦溪塑料制品有限公司年产18亿条方底阀口塑料编织袋智能化技术改造项目引进设备（第二次）招标公告
江西省机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标于2021-4-14在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。
一、招标条件
1、项目概况：该设备为招标人生产自用
2、资金到位或资金来源落实情况：招标人自有资金
3、项目已具备招标条件的说明：项目已经批准
二、招标内容：
1、招标项目编号：****-********2001
2、招标项目名称：江西锦溪塑料制品有限公司年产1.8亿条方底阀口塑料编织袋智能化技术改造项目引进设备（第二次）
3、项目实施地点：江西省乐平市工业园塔前工业区
4、招标产品列表（主要设备）：
序号 | 产品名称 | 数量 | 简要技术规格 | 备注 |
1 | 高速覆膜机 | 2台 | 1、生产能力：250米-280米/分钟/台。 2、*带吊装的自动放卷单元，换卷按高速不停机双工位换卷，换卷时最低放卷速度不低220米/分钟。 3、*涂层重量15-40g/㎡或涂层重量12-50g/㎡。 4、*自动换网功能，热辊或加热风箱对编织基布预热系统。 | 其他具体技术要求详见招标文件 |
2 | 热封方底阀口制袋机 | 4台 | 1、*生产能力：120个/分钟/台。 2、*双工位换卷（高速换卷），阀口袋生产配置。 3、*质量检测单元。 4、*工作宽度筒布350-600mm。 5、*编织布瑕疵贴标识别。 6、*废袋自动剔除装置 7、*热封方底阀口制袋机性能指标；①对编织基布宽度误差要求±7mm。②热封强度，三角区强度为基布强度65%，中间区强度为基布强度75%。③最高热融温度≥700℃。④合格率≥98.5%。 | 其他具体技术要求详见招标文件 |
3 | 布卷分切机 | 2台 | 1、生产能力：100米/分钟/台。 | 其他具体技术要求详见招标文件 |
4 | 阀口袋空袋透气率测试仪 | 1台 | 1、可移动式设计，采用三种检测范围测试阀口袋的空气透气率: 0.5–6.5 m3/h 5–50 m3/h 10–100 m3/h | 其他具体技术要求详见招标文件 |
三、投标人须具备的资格或业绩：
1.代理商投标时须有制造商授权经销的代理证书复印件或具有制造商同意其在本次投标中提供该货物的授权函原件。
2.投标人开户银行在开标日前三个月内开具的银行资信证明原件或复印件；
3.其他资格要求：
（1）投标人（仅针对国内代理商）须提交有效的企业法人营业执照原件或复印件加盖单位公章；
是否接受联合体投标：否
未领购招标文件是否可以参加投标：否
四、招标文件的获取
招标文件领购开始时间：2021年4月14日
招标文件领购结束时间：2021年4月21日
获取招标文件方式:现场领购
招标文件领购地点：江西省机电设备招标有限公司招标二部
招标文件售价：每份1000元人民币或150美元；
其他说明：招标文件领购后不退。节假日不领购。
五、投标文件的递交
投标截止时间（开标时间）：2021年5月6日9:30时
投标文件送达地点：江西省机电设备招标有限公司2楼第五开标大厅（216室）
开标地点：江西省机电设备招标有限公司2楼第五开标大厅（216室）
六、投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公布。
七、联系方式
招标人：江西锦溪塑料制品有限公司
地址：江西省乐平市工业园塔前工业区
联系人：王先生
联系方式：158*****108
招标代理机构：江西省机电设备招标有限公司
地址：南昌市省政府大院北二路92号咨询大厦二楼203室
联系人：高先生
联系方式：电话：+86-****-********邮箱：jz2@jxzxtz.com
八. 汇款方式
户名：江西省机电设备招标有限公司
开户银行（人民币）：中信银行南昌分行营业部(注：人民币境内账户，不接受境外汇款)
开户银行（外币账户）：中国银行江西省分行
账 号：********5545（美元）
********5543（欧元）
********5549（日元）
Jiangxi Machinery & Electric Equipment Tendering Co., Ltd, for and on behalf of the Tenderee, will hold international open competitive tender for the following products and services, which will be announced at http://www.chinabidding.com/in 2021-April-6th. This tender will be implemented in the traditional way. The eligible tenderers are hereby invited to participate in the tender.
1. Terms of bidding
Project profile: the equipment is used by the tenderee itself for production.
Capital preparation or capital source checking information: the tenderee’s owned fund
Description about project’s qualification for tendering: already approved
2. Bidding content:
IFB No.：****-********2001
Project Name：Jiangxi Jinxi Plastic Products Co., Ltd. Imported Equipment of 180 Million Square Bottom Valve Mouth Plastic Woven Bag Intelligent Technology Transformation Project(the second tendering)
Project Location：Taqian Industrial Zone, industrial park, Leping City, Jiangxi Province
List of tendering products (main equipment):
No. | Name of Product | Quantity | Brief Technical Specification | Remarks |
1 | Extrusion coating machine | 2set | 1.productioncapacity:250-280m/min/set 2.*Automatic unwinding unit with hoisting,high speed roll change between two unwind positions without stop work,Minimum Roll Change speed 220m/min. 3.*coated weight:15-40g/㎡or 12-50g/㎡. 4.*Automatic band,Preheating system of knitting base cloth by hot roller or heating air box. | See Details in the technical specifications and requirements of bidding document |
2 | Block bottom valve bag converting machine | 4set | 1.*productioncapacity:120/min/set 2.*roll change between two unwind positions(high speed roll change),valve pocket production configuration 3.*Quality inspection unit 4.*Working width for flat 350-600mm 5.*Identification of woven fabric defect labeling 6.*Automatic removal device for waste bags 7.*Performance index of heat sealing square bottom valve mouth bag making machine: ①The width error of woven base cloth should be ± 7mm. ②The heat seal strength and triangle area strength are 65% of the base cloth strength,The strength of the middle zone is 75% of the base cloth strength. ③Maximum melting temperature ≥ 700 ℃. ④Pass rate ≥ 98.5%. | See Details in the technical specifications and requirements of bidding document |
3 | Slitting machine for woven fabric | 2set | 1.*productioncapacity:100m/min/set | See Details in the technical specifications and requirements of bidding document |
4 | Air flow tester for valve bags | 1set | 1.Symbolic illustration in mobile design, for determining the air permeability of pasted valve type bags with three measuring ranges: 0.5–6.5 m3/h 5–50 m3/h 10–100 m3/h | See Details in the technical specifications and requirements of bidding document |
3. Qualification and performance requirements of tenderers
1)If the bidder"s goods are not made by the bidder, the bidder shall obtain the consent of the manufacturer for the goods in the formal authorization(original) or Certificate of authorized distribution by manufacturer(copy).
2) The bank issued in the three months before the opening date of the bidder’s bank credit certificate of the original or copy;
3) Other qualification documents as following:
①The bidder (if the bidder is Agent in domestic ) must present the valid original business license or the copies with official seal.
Is Consortium Bid accepted: NO
Whether the bid can be participated in without purchasing bidding document: No
4. Obtaining of the bidding document
Beginning time of purchasing the bidding document: 2021-April-14th
Deadline of purchasing the bidding document: 2021-April-21th
Obtain tender documents: on-site purchase
Location of collecting the bidding document ：No.2 Tendering Department of Jiangxi Machinery& Electric Equipment Tendering Co., Ltd.
Sales price of the bidding document: upon non-refundable payment of CNY￥1000 or USD$150.
Other notes: No purchasing is available during holidays and festivals, and no refund after sale.
5. Submission of Bidding Documents
Deadline for bid submission (Bid Opening) ：9:30, 2020-May-6th
Address for bid submission: the fifthbid opening hall on the 2thfloor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
Place for Bid Opening：the fifthbid opening hall on the 2thfloor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
6.The bidders should complete their registry on http://www.chinabidding.combefore the deadlineof bids submission. The bidding results will be publicized on http://www.chinabidding.comafterwards.
7. Contact Information
Tenderee:Jiangxi Jinxi Plastic Products Co., Ltd.
Address: Taqian Industrial Zone, industrial park, Leping City, Jiangxi Province.
Contact：Mr Wang
Tel：158*****108
Tendering Agent: Jiangxi Machinery & Electric Equipment Tendering Co., Ltd.
Address: Room 203, 2/F, No.92, bei’er Road, Jiangxi Provincial Government Courtyard, Nanchang, China
Contact: MrGao
Tel：+86-****-********Email: jz2@jxzxtz.com
8. Banking Information
Opening Bank of the Tendering Agent (Domestic Account of CNY):Sales Department of Nanchang Branch of CITIC Bank
Account No: ********147*****151
Opening Bank of the Tendering Agent (For Foreign currency):Bank of China, Jiangxi Branch.
Account No.: ********5545（USD）
Account No.: ********5543（Euro）
Account No.: ********5549（Japanese yen）
|
招标
|
江西省机电设备招标有限公司 关注我们可获得更多采购需求 |
关注 |
最近搜索
无
热门搜索
无
