招标公告

项目名称：陵水25-1开发工程项目API Spec 6A球阀

招标编号：0704-2240JDCP1910/01

日 期：2022年9月5日

1．中化建国际招标有限责任公司（以下简称“招标机构”）受中海石油（中国）有限公司委托，就陵水25-1开发项目的下列全新货物和有关服务进行国际公开招标，现邀请投标人对下列货物和服务提交密封投标：

资金到位或资金来源落实情况：已落实

项目已具备招标条件的说明：已具备

是否接受联合体投标：不接受

是否接受代理商投标：接受

项目概况：

陵水 25-1 气田开发依托崖城13-1 平台，通过水下生产系统回接至崖城13-1 已建平台进行处理和外输，同时新建崖城13-1 PAP 平台布置新增设备，与崖城13-1AWA 平台栈桥相连。

货物名称：API Spec 6A球阀

数量：1批

交货期：2023年3月20日（国内）或2023年3月20日（进口）

交货地点：青岛海工建造场地（国内货物）或?DAP 青岛港（进口货物）

2．业绩和资格要求：

1)API Spec 6A球阀须满足以下要求：自 2010 年 1 月 1 日至截标日，阀门制造商至少具有 2 台套阀门尺寸和压力磅级 不低于 6"x*****PSI 的球阀在海上油气生产装置（海上油气陆地接收终端、海上油 气生产固定平台或 FPSO 等浮式油气生产平台）上成功运行 1 年及以上的业绩（成 功运行 1 年以上定义为 投标截止日前一年完成工厂阀门试压测试检验或用户现 场调试或用户验收）。 投标人须提交有效的业绩表和相关证明文件，包括但不限于: 合同签署时间及合同 复印件相关章节、货物名称、供货数量、设备所应用的海上油气生产装置、阀门尺 寸和压力等级、阀门制造厂、业绩要求规格的阀门试压报告或调试报告或用户使用 证明或用户验收证明（包括内容和签署页）。未提交业绩证明文件，或所提供的业 绩证明文件无法验证上述信息，均视为无效业绩。

2）根据请购书“附录 B”的最低要求，阀门应为 B（CA+W）。B 类要求应获得认证机构（CCS、ABS、DNV 或 BV）的资格证书。投标人承诺在产品交货时随货提供证书。

3）要求投标人提供的其他资格证明文件：A如果投标人为境内注册公司，需提供有效的营业执照（具备独立法人资格）、一般纳税人证明/税务登记证、组织机构代码证或在有效期内的三证合一营业执照复印件，并加盖公章；B如果投标人为境外注册公司，需提供有效的公司登记注册证明。

4）阀门制造商应具有有效的质量管理体系证书 GB/T***** 或 ISO 9001 或 API Q1。

5）对于国内阀门制造商，需提供有效的 TSG D2001 规定的《中华人民共和国特种设 备制造许可证》或 TSG 07 规定的《中华人民共和国特种设备生产许可证》。TSG D7002 要求的特种设备型式试验证书应覆盖本次采购产品范围，并在产品交货时随 货提供。对于国外阀门制造商，满足本次招标业绩要求的压力管道阀门应按相关安全技术规 范要求通过型式试验和制造监督检验（或者进口安全性能监督检验）。

6）阀门制造商应具有符合 API 6FA 或 ISO ***** 的 6“（API 5 1/8”）*****psi 球阀的型式认证。

3．有兴趣的合格投标人可通过以下方式获取招标文件：

从 2022年9月5日至2022年9月13日止，在中国海油采办业务管理与交易系统（https://buy.cnooc.com.cn/cbjyweb/）购买招标文件（电子版）。投标人须在线填写购买招标文件登记表，并在线支付标书款至指定账户。在线支付成功后，投标人可自行下载招标文件。招标文件每套售价为200元人民币或30美元（收款人：中化建国际招标有限责任公司，
收款行名称：中国工商银行股份有限公司北京国家文化与金融合作示范区金街支行；INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch；收款人账号：020*****091********，收款行SWIFT CODE: ICBKCNBJBJM，收款行地址：No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR: *****6），售后不退。未在本系统领购招标文件，不得参加投标。

4．投标文件递交截止时间和地点：所有投标文件都应附有按规定提交的投标保证金并于2022年9月27日10:00（北京时间）前递交至北京市东城区东直门外小街6号海油大厦4层第2会议室。在此时间后收到的投标文件恕不接受。

?5．开标时间：定于2022年9月27日10:00（北京时间）开标。开标地点：北京市东城区东直门外小街6号海油大厦4层第2会议室。

6.本次招标公告同时在机电产品招标投标电子交易平台（www.chinabidding.com）上发布。

7.投标人在投标前需在机电产品招标投标电子交易平台上完成注册。评标结果将在机电产品招标投标电子交易平台公示。

招标人：中海石油（中国）有限公司

详细地址：海南省海口市秀英区长滨三路6号荣城铂郡

邮编：******

联系人：陈丽

联系电话：+86-898-********

电子信箱：chenli10@cnooc.com.cn

招标代理机构：中化建国际招标有限责任公司

详细地址：北京市东城区东直门外小街6号海油大厦4层

邮编：******

联系人：李蕾

联系电话：+86-10-********

电子邮箱：lilei3@cnooc.com.cn

Project: LS25-1 GAS FIELD DEVELOPMENT PROJECT?API Spec 6A BALL VALVES

BidNo: 0704-2240JDCP1910/01

Date: Sep.5，2022

1. CNCCC International Tendering?Co.,Ltd.(hereinafter?called“Tendering?Agent”),for and on behalf of CNOOC China?Limited(here?in?after?called"Purchaser")invites?sealed?bids from eligible?bidders for the?supply?of following equipment:

Source of Funds：Yes

Description of The Prepared BiddingConditions：Yes

JointBids：NOT Acceptable

Agent Bid: Acceptable

Project overview:

The development of Lingshui 25-1 gas field relies on Yacheng 13-1 platform and is connected to the established platform of Yacheng 13-1 for treatment and external transport through the underwater production system. Meanwhile, new equipment is arranged on the newly built Yacheng 13-1 PAP platform, which is connected with the trekking bridge of Yacheng 13-1AWA platform.

Name?of Goods: API Spec 6A BALL VALVES

Qty: 1?lots

Delivery Schedule: On?or?before?Mar.20th, 2023(From?within?PRC)

On?or?before? Mar.20th, 2023 (From?outside?PRC)

Destination of?delivery:

From?within?PRC ：Qingdao COOEC Construction site

From outside?PRC：DAP Qingdao Port

2. Qualificationrequirements:

1) All the valves need to meet below requirements：From January 1st, 2010 to the bid deadline, The valve manufacturer shall have at least 2 sets of ball valves reference with valve size and pressure rating not less than 6" x*****psi, which have been successfully operated on offshore oil and gas production units (Land receiving terminals for offshore oil and gas,offshore oil and gas production fixed platforms or floating oil and gas production units such as FPSO) for 1 year or more (successful operation for more than 1 year is defined as completion of factory test and inspection or user site commissioning or user acceptance before the bid deadline).The Bidder shall submit valid reference lists and relevant documentary evidence for reference, including but not limit to： the signing date of contract, equipment name，quantity，type of oil& gas production facility for which equipment to be applied, valve size and pressure rating, Valve Manufacturing Plant, valve pressure test report of reference corresponding specification or commissioning report or certificates of user application or certificates of user acceptance (including the content and signing page)。 Absence of the reference evidence documents or the failure to verify above information ， the reference shall be deemed as invalid.

2)Valves shall be B(CA+W) as per “APPENDIX B” as a minimum requirement. The requirements for category B shall get qualification certificates from the certification agency (CCS, ABS, DNV or BV). the bidder undertakes to provided the certificate with the products at the time of delivery.

3）Other qualification documents required to be provided by the bidder: A if the bidder is a domestic registered company, it is required to provide a valid business license (with independent legal person qualification), general taxpayer certificate / tax registration certificate, organization code certificate or a copy of the three in one business license within the validity period, and affix the official seal; B if the bidder is an overseas registered company, it is required to provide a valid certificate of company registration.

4)The valve manufacturer should have valid Quality management system certificate in accordance with GB/T*****、ISO 9001 or API Q1.

5)For national valve manufactures, valid Manufacture License of Special Equipment People’s Republic of China as per TSG D2001 or valid Production License of Special Equipment People’s Republic of China as per TSG 07. Type-Test Certification of Special Equipment as per TSG D7002 covering bidding product should be provided with the products at the time of delivery.For the foreign valve manufacturers, the pressure pipeline valves that meet the performance requirements of this bidding shall pass the type test and manufacturing supervision and inspection (or import safety performance supervision and inspection) according

6）The valve manufactures shall have type approval certification which can cover 6” (API 5 1/8”) *****psi ball valve per API 6FA or ISO *****.

to the relevant safety technical specifications.

3.All?those?who?are?willing to participate in the bids are?kindly requested to: enter?into?website?http://buy.cnooc.com.cn to purchase the bidding documents (electronic edition) online fromSep 5th, 2022 toSep 13th，2022.upon?non-refundable?payment?of?RMB200?or?USD30 for each copy. ( USD A/C detail：Beneficiary: CNCCC International Tendering Co., Ltd., Name of?Bank: INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch.USD A/C No.: 020*****091********, SWIFT Code: ICBKCNBJBJM，Bank address:No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR: *****6.).After completion of the remittance, the biddercoulddownload the bidding documents. Those who didn’t purchase thebidding documents are not allowed to participate in the bids.

4.Bids?must?be?mailed?toConference Room 2, Floor 4, Cnooc Tower, No.6, Dongzhimenwai Xiaojie, Dongcheng District, Beijing?for?submission?of?bids?before10:00?a.m. (Beijing time) ?on? Sep 27th，2022.

5..Bids?will?be opened in the presence of bidders’ representatives who choose to attend at 10:00 a.m. (Beijing time) on Sep 27th，2022?atConference Room 2, Floor 4, Cnooc Tower, No.6, Dongzhimenwai Xiaojie, Dongcheng District, Beijing******,P.R.China for bid-opening.

6?.The?Invitation?for Bids is issued on the website of www.chinabidding.com?simultaneously.

7.?The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will?be released on www.chinabidding.com.

Name?of?Purchaser:?CNOOC?CHINA LIMITED

Address:Rongcheng Bojun, No.6 Changbin 3rd Road, Xiuying District, Haikou, Hainan,P.R.China,?******

Contact person: Chen Li

Telephone:?+86-898-********

E-mail: chenli10@cnooc.com.cn

Name?of?Tendering?Agent:CNCCC International Tendering Co.,Ltd.

Address:Floor4,CNOOCTower,No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing ******,P.R. China
Post Code: ******

Contact person: Ms. Li Lei

Telephone: +86-10-********

E-mail: lilei3@cnooc.com.cn