磨床和EDT设备招标公告
磨床和EDT设备招标公告
| 磨床和EDT设备项目招标公告 | |||
| 发布日期：2015-02-15 | |||
| 招标编号：****-*******GZ495 | |||
| 上海宝华国际招标有限公司(以下称招标机构)受宝钢湛江钢铁有限公司(以下称买方)委托，就其磨床和EDT设备项目所需的下列货物进行国际公开招标，邀请合格投标人进行网上电子投标。 | |||
| 1. | 招标货物名称、数量、技术规格和资金来源： | ||
| 包1：工作辊磨床 | |||
| 1)货物名称：工作辊磨床; | |||
| 2)数量：3台; | |||
| 3)主要技术参数：工作辊磨床主要承担1条酸轧机组的五机架6辊轧机、1条连退机组6辊平整机和1条热镀锌机组4辊平整机等工作辊和中间辊的磨削工作。*设备加工能力及精度要求设备具备最大磨削辊子外径：Φ800mm；设备两顶针间最大距离：≥4800mm；设备承载最大轧辊重量：10000kg；砂轮最大线速度要求达到≥65m/s (CBN砂轮)； 工件材质：Cr5合金锻钢；磨削表面硬度：中间辊78-85°肖氏（Hs）；工作辊93-99°肖氏（Hs）；辊形曲线：圆柱、UCM曲线、凸度、组合曲线、分段倒角、锥度；工作辊磨床加工精度(不带轴承座磨削)：圆柱度：≤0.002mm；圆 度：≤0.001mm；直线度：≤0.001mm/m；轮廓线误差（UCM曲线、凸度、组合曲线）：≤0.003mm/m；其他技术要求详见第七章招标技术文件。; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包2：万能磨床 | |||
| 1)货物名称：万能磨床; | |||
| 2)数量：1台; | |||
| 3)主要技术参数：万能磨床主要承担：1）1550冷轧单元：1条酸轧机组的五机架6辊轧机、1条连退机组6辊平整机和1条热镀锌机组4辊平整机的支承辊、五机架轧机中间辊的磨削工作；2）2030冷轧单元：酸轧机组的部分支承辊和中间辊的磨削工作。设备加工能力及精度要求：设备具备最大磨削辊子外径：Φ1500mm；设备两顶针间最大距离≥5500mm；设备承载最大轧辊重量：40000kg；砂轮最大线速度要求达到≥65m/s (CBN砂轮)； 工件材质：Cr3~5合金锻钢。其他技术要求详见第七章招标技术部分。; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包3：电火花毛化设备（EDT) | |||
| 1)货物名称：电火花毛化设备（EDT); | |||
| 2)数量：1台; | |||
| 3)主要技术参数：电火花打毛设备承担：1)1550冷轧单元：酸轧机组的五机架轧机、连退机组平整机和热镀锌机组平整机的所有工作辊表面毛化加工；2）2030冷轧单元：酸轧机组的五机架轧机、连退机组平整机和热镀锌机组平整机的部分工作辊表面毛化加工。加工能力及精度要求：(1) 可加工工件直径范围：Φ200mm~Φ800mm；(2) 可加工工件辊身长度范围(L)：1200≥L≥2100mm；(3) 设备能加工的工件最大长度：5000mm；(4) 可加工最大工件重量：10000kg；(5) 辊形曲线：圆柱、CVC曲线、UCM曲线、凸度；(6) 工件表面毛化后粗糙度范围：Ra0.8～12.0μm；其他技术要求详见招标文件第七章招标技术文件。; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 2. | 交货地点和交货时间： | ||
| 包1：工作辊磨床 | |||
| 1)交货地点：CIF湛江 | |||
| 2)交货时间：以双方在技术交流时签署的技术附件为准 | |||
| 包2：万能磨床 | |||
| 1)交货地点：CIF湛江 | |||
| 2)交货时间：见双方签订的技术附件 | |||
| 包3：电火花毛化设备（EDT) | |||
| 1)交货地点：CIF湛江 | |||
| 2)交货时间：以双方在技术交流时签署的技术附件为准 | |||
| 3. | *凡确认投标的投标人请登录中国国际招标网(http://www.chinabidding.com/)，务必在开标前注册为其会员并通过年检以获得投标资格，中标情况将在中国国际招标网公示。 | ||
| 4. | 宝华国际招标网(http://www.baosteelbidding.com)可同时提供我公司的招标项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后，投标人可在宝华国际招标网上在线购买招标文件，进行投标和开标活动。 | ||
| 5. | 购买招标文件时间： | ||
| 包1：工作辊磨床 | |||
| 1)购买招标文件时间：2015-02-15~2015-03-10（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包2：万能磨床 | |||
| 1)购买招标文件时间：2015-02-15~2015-03-10（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包3：电火花毛化设备（EDT) | |||
| 1)购买招标文件时间：2015-02-15~2015-03-10（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 6. | 招标文件售价：招标文件英文版及中文版一套（电子版），若中文和英文版有冲突以中文版为准。 | ||
| 包1：工作辊磨床 | |||
| 售价为人民币2000元或250美元整。 | |||
| 包2：万能磨床 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包3：电火花毛化设备（EDT) | |||
| 售价为人民币1500元或200美元整。 | |||
| 招标文件均按包进行计价出售，投标人成功购标后，自行下载招标文件和投标文件模板。招标文件一经售出不得退还。 | |||
| 7. | 投标截止时间和开标时间： | ||
| 包1：工作辊磨床 | |||
| 1)投标截止时间：2015-03-10 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包2：万能磨床 | |||
| 1)投标截止时间：2015-03-10 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包3：电火花毛化设备（EDT) | |||
| 1)投标截止时间：2015-03-10 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 8. | 开标方式： | ||
| 包1：工作辊磨床 | |||
| 电子一步法 | |||
| 包2：万能磨床 | |||
| 电子一步法 | |||
| 包3：电火花毛化设备（EDT) | |||
| 电子一步法 | |||
| 9. | 开标信息： | ||
| 包1：工作辊磨床 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包2：万能磨床 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包3：电火花毛化设备（EDT) | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 10. | *投标条件及资格要求： | ||
| 包1：工作辊磨床 | |||
| 1)投标条件及资格要求：*要求投标人在开标前5天必须与买方完成技术交流并签署技术附件，投标文件的技术部分以签署的技术附件为准。*投标人应具有磨削和/或毛化生产高档家电板、汽车外板用轧辊的同类设备供货业绩。 | |||
| 包2：万能磨床 | |||
| 1)投标条件及资格要求：*要求投标人在开标前5天必须与买方完成技术交流并签署技术附件，投标文件的技术部分以签署的技术附件为准。*投标人应具有磨削和/或毛化生产高档家电板、汽车外板用轧辊的同类设备供货业绩。 | |||
| 包3：电火花毛化设备（EDT) | |||
| 1)投标条件及资格要求：*要求投标人在开标前5天必须与买方完成技术交流并签署技术附件，投标文件的技术部分以签署的技术附件为准。*投标人应具有磨削和/或毛化生产高档家电板、汽车外板用轧辊的同类设备供货业绩。 | |||
| 11. | 联合体投标： | ||
| 包1：工作辊磨床 | |||
| 本项目不允许联合体投标 | |||
| 包2：万能磨床 | |||
| 本项目不允许联合体投标 | |||
| 包3：电火花毛化设备（EDT) | |||
| 本项目不允许联合体投标 | |||
| 12. | 客服热线：0086-400-821-0772（有关投标人CA办理事项的咨询） | ||
| 传真：0086-21-******** | |||
| 网上购标方法：具体操作方法详见宝华招标网“操作指南”。 | |||
| 项目经理：胡冬艳（有关招标项目商务、技术问题可致电项目经理。） | |||
| 电 话：******** | |||
| 传 真：******** | |||
| 电子邮件：hudongyan@baosteel.com | |||
| 业务助理：方小慧 | |||
| 电 话：***-******** | |||
| 招标机构地址：上海市宝山区克山路550弄果园公寓8号楼 | |||
| 邮 编：201999 | |||
| 收 款 人：上海宝华国际招标有限公司 | |||
| 开户银行：建行宝钢宝山支行 | |||
| 人民币银行账号：****************9757 | |||
| 欧元银行账号：****************0041 | |||
| 美元银行账号:****************0041 | |||
| 日元银行账号：****************0041 | |||
| Swift Code：PCBCCNBJSHX | |||
| Issue Date：2015-02-15 | |||
| Tendering No.：****-*******GZ495 | |||
| Shanghai Baohua International Tendering Co., Ltd.（Hereinafter referred to as Tendering Agency）is commissioned by Baosteel Zhanjiang Iron & Steel Co., Ltd.（Hereinafter referred to as tenderer）on international open bidding for the following goods required in Grinder and EDT equipment and invites eligible bidders to online e-bidding。 | |||
| 1. | The name, quantity, technical specifications and fund sources of goods for tendering： | ||
| Bid1：Working Roll Grinder equipments | |||
| 1)The name：Working roll grinder; | |||
| 2)Quantity：3 sets; | |||
| 3)Technical specifications：The working roll grinder mainly undertake the grinding of 1 PL-TCM ’s 5 stand 6 rolls mill , 1 CAL 6 rolls skin pass mill and 1 CGL ’s 4 roll skin pass mill, etc and the intermediate roll.*equipment manufacture capacity and accurate requirement:The maximum grinding roll OD: Φ800mm;the maximum distance between 2 pin thimbles of equipment≥4800mm;the maximum weight the equipment can load:10000kg;the maximum line velocity of the grinding wheel should reach≥65m/s (CBN grinding wheel); Workpiece material：Cr5 alloy forging steel;surface grinding hardness：intermediate roll 78-85°Hs;working roll 93-99°Hs;roll shape curve: cylinder、UCM curve 、convexity、composite curve、Segmented chamfering、taper; working roll grinder machining accuracy(without bearing grinding)：cylindricity≤0.002mm;roundness≤0.001mm;Straightness≤0.001mm/m;Contour error（UCM curve、convexity、composite curve）：≤0.003mm/m;Please refet to section 7 for other technical requirments.; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid2：Universal Grinder equipment | |||
| 1)The name：Universal grinder; | |||
| 2)Quantity：1 set; | |||
| 3)Technical specifications： universal grinder mainly undertake:1）1550 cold rolling unit: the grinding of 1 PL-TCM ’s 5 stand 6 rolls mill , 1 CAL 6 rolls skin pass mill and 1 CGL ’s 4 roll skin pass mill’s back up roll, 5 stand mill intermediate roll etc. 2）2030 cold rolling unit: grinding work for parts of the back up roll and intermediate roll in PL-TCM. *Equipment processing capacity and accuracy requirements: Equipment with the maximum grinding roll OD: Φ1500mm;The maximum distance between the thimbles of the equipment≥5500mm;The maximum roll weight can be loaded by the equipment: 40000kg;The maximum line velocity of grinding wheel is required to reach≥65m/s (CBN grinding wheel); The workpiece material: Cr3~5 alloy forging steel.Please refer to Section 7 for other technical requirement.; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid3：EDT equipment | |||
| 1)The name：EDT equipment; | |||
| 2)Quantity：1 set; | |||
| 3)Technical specifications：Electrical Discharge Texture undertakes:1)Cold rolling unit of 1550: all working roller surface coarsen treatment of five stands rolling mill of PL-TCM, skin pass mill of CAL and CGL.2）Cold rolling unit of 2030: partial roller surface coarsen treatment of five stands rolling mill of PL-TCM, skin pass mill of CAL and CGL.EDT processing capability and accuracy requirements:(1) Diameter range of machinable workpiece: Φ200m~Φ800mm;(2) Roll barrel length range of machinable workpiece:1200≥L≥2100mm; (3) The maximum workpiece length of machinable equipment: 5000mm;(4) The maximum weight of machinable workpiece: 10000kg;(5) Roll forming curve: Cylinder, CVC curve, UCM curve, degree of convexity;(6) The roughness range after texturing the surface of the workpiece: Ra0.8～12.0μm;Please refer to Section 7 for other technical requirements.; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| 2. | Delivery time and place： | ||
| Bid1：Working Roll Grinder equipments | |||
| 1)Delivery place：CIF Zhanjiang | |||
| 2)Delivery time：Refer to the signed technical appendix | |||
| Bid2：Universal Grinder equipment | |||
| 1)Delivery place：CIF Zhanjiang | |||
| 2)Delivery time：according to the technical appendix signed by both parties. | |||
| Bid3：EDT equipment | |||
| 1)Delivery place：CIF Zhanjiang | |||
| 2)Delivery time：according to the technical appendices signed during the technical exchange by both parties | |||
| 3. | *The bidders who have confirmed to participate the bid must log on China International Bidding Website(http://www.chinabidding.com/))，and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website. | ||
| 4. | Baohua E-bidding website http://www.baosteelbidding.com)could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online. | ||
| 5. | Time for purchasing Tendering Documents： | ||
| Bid1：Working Roll Grinder equipments | |||
| Time for purchasing Tendering Documents：2015-02-15~2015-03-10(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid2：Universal Grinder equipment | |||
| Time for purchasing Tendering Documents：2015-02-15~2015-03-10(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid3：EDT equipment | |||
| Time for purchasing Tendering Documents：2015-02-15~2015-03-10(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| 6. | Sales prices of the tendering document：One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language. | ||
| Bid1：Working Roll Grinder equipments | |||
| Sales price is CNY 2000 or USD 250。 | |||
| Bid2：Universal Grinder equipment | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid3：EDT equipment | |||
| Sales price is CNY 1500 or USD 200。 | |||
| All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable. | |||
| 7. | Deadline for bid submission and Bid Opening Time： | ||
| Bid1：Working Roll Grinder equipments | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-03-10 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid2：Universal Grinder equipment | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-03-10 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid3：EDT equipment | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-03-10 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| 8. | Bid opening style： | ||
| Bid1：工作辊磨床 | |||
| E-biddingOne-step of opening | |||
| Bid2：万能磨床 | |||
| E-biddingOne-step of opening | |||
| Bid3：电火花毛化设备（EDT) | |||
| E-biddingOne-step of opening | |||
| 9. | Biding opening place： | ||
| Bid1：Working Roll Grinder equipments | |||
| 1)Bid Opening Time：2015-03-10 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid2：Universal Grinder equipment | |||
| 1)Bid Opening Time：2015-03-10 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid3：EDT equipment | |||
| 1)Bid Opening Time：2015-03-10 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| 10. | *Requirements of Bidder’s qualification： | ||
| Bid1：Working Roll Grinder equipments | |||
| 1)Requirements of Bidder’s qualification：*Require the bidder must complete the technical communication and sign the technical appendix with the buyer 5 days before the bid opening. The technical parts of the bidding document is prevailed by the signed technical appendix.*The bidder shall have the references of supplying the high quality automobile outside plate and high-end home appliance plate line of grinding and/ or roughening production. | |||
| Bid2：Universal Grinder equipment | |||
| 1)Requirements of Bidder’s qualification：*Require the bidder must complete the technical communication and sign the technical appendix with the buyer 5 days before the bid opening. The technical parts of the bidding document is prevailed by the signed technical appendix.*The bidder shall have the references of supplying the high quality automobile outside plate and high-end home appliance plate line of grinding and/ or roughening production. | |||
| Bid3：EDT equipment | |||
| 1)Requirements of Bidder’s qualification：*Require the bidder must complete the technical communication and sign the technical appendix with the buyer 5 days before the bid opening. The technical parts of the bidding document is prevailed by the signed technical appendix.*The bidder shall have the references of supplying the high quality automobile outside plate and high-end home appliance plate line of grinding and/ or roughening production. | |||
| 11. | Bidding consortium： | ||
| Bid1：工作辊磨床 | |||
| This project no consortium bidding is accepted | |||
| Bid2：万能磨床 | |||
| This project no consortium bidding is accepted | |||
| Bid3：电火花毛化设备（EDT) | |||
| This project no consortium bidding is accepted | |||
| 12. | Customer service hotline：0086-400-821-0772 (consulting for bidders CA affairs) | ||
| Fax：021-******** | |||
| Online tendering document purchase：please refer to "HELP" for details on Baohua tendering website. | |||
| Bid manager：Hu Dongyan(contact project leader for commercial, technical problems of tendering project) | |||
| Tel：******** | |||
| Fax：******** | |||
| E-mail：hudongyan@baosteel.com | |||
| Business assistant：Fang Xiaohui | |||
| Tel：***-******** | |||
| Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China | |||
| Post code：201999 | |||
| Beneficiary： Shanghai Baohua International Tendering Co., Ltd. | |||
| Bank account：China Construction Bank Baoshan Branch | |||
| RMB Accounting Number:****************9757 | |||
| EUR Accounting Number****************0041 | |||
| USD Accounting Number：****************0041 | |||
| JPY Accounting Number：****************0041 | |||
| Swift Code：PCBCCNBJSHX | |||
标签:
0人觉得有用|
招标
|
- 关注我们可获得更多采购需求 |
关注 |
最近搜索
无
热门搜索
无
