中国电子进出口总公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2015-03-06在中国国际招标网公告。 本次招标采用传统招标方式，现邀请合格投标人参加投标。 |
1、招标条件 |
项目概况：南京中电熊猫平板显示科技有限公司平板显示工程技术研发中心项目生产线设备采购 |
资金到位或资金来源落实情况：资金已落实 |
项目已具备招标条件的说明：具备招标条件 |
2、招标内容： |
招标项目编号：0714-1440CECNJXM6/21-24、26-29 |
招标项目名称：南京中电熊猫平板显示科技有限公司平板显示工程技术研发中心项目 |
项目实施地点：中国江苏省 |
招标产品列表(主要设备)： |
序号 | 产品名称 | 数量 | 简要技术规格 | 备注 | 0714-1440CECNJXM6/21 | 框胶热固化装置、配向膜烘烤装置及彩膜固化装置(研发中心) | 3台 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 | 0714-1440CECNJXM6/22 | 显影液稀释供给装置(研发中心) | 1台 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 | 0714-1440CECNJXM6/23 | 阵列打码/周边曝光装置与BM激光打码装置（研发中心） | 2台 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 | 0714-1440CECNJXM6/24 | 紫外光清洗装置(研发中心) | 7台 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 | 0714-1440CECNJXM6/26 | 液晶模组开发设备 | 1套 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 | 0714-1440CECNJXM6/27 | 湿法蚀刻装置（研发中心-Gate、Source、氧化膜、ITO） | 2台 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 | 0714-1440CECNJXM6/28 | 近接式曝光机（研发中心） | 1台 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 | 0714-1440CECNJXM6/29 | 自动化物料搬送系统(研发中心) | 1套 | 设备描述：该设备系统需要设计合理，技术先进，以确保系统良好的动力学性能；该行动控制系统具有精度佳，可靠性高和快速反应的特点；该系统需要方便应用，操作和维护，精细的设备配置，精确的结构，可靠性高和令人满意的售后服务。 |
|
3、投标人资格要求 |
投标人应具备的资格或业绩：投标人应是响应招标、已在招标机构处领购招标文件，并参加投标竞争的法人或其他组织。凡是来自中华人民共和国或是与中华人民共和国有正常贸易往来的国家或地区的法人或其他组织均可投标。 |
是否接受联合体投标：不接受 |
未领购招标文件是否可以参加投标：不可以 |
4、招标文件的获取 |
招标文件领购开始时间：2015-03-06 |
招标文件领购结束时间：2015-03-13 |
获取招标文件方式：现场领购 |
招标文件领购地点：中国电子进出口总公司, 北京市海淀区复兴路17号国海广场A座新中电大厦21层标书发售处 |
招标文件售价：详见招标文件 |
其他说明：招标文件售价详见招标产品列表。招标文件领购具体时间：2015-3-6 9:00 至 2015-3-13 16:30 (北京时间)（节假日以及每日午休时间除外） |
5、投标文件的递交 |
投标截止时间（开标时间）：2015-03-27 10:00 |
投标文件送达地点：中国电子进出口总公司北京市海淀区复兴路17号国海广场A座新中电大厦19层 |
开标地点：中国电子进出口总公司北京市海淀区复兴路17号国海广场A座新中电大厦19层 |
7、联系方式 |
招标人：南京中电熊猫平板显示科技有限公司 |
地址：南京市栖霞区仙林大道科技南路 |
联系人：陈路 |
联系方式 ：+86-25-******** |
招标代理机构：中国电子进出口总公司 |
地址：北京市海淀区复兴路17号国海广场A座新中电大厦 |
联系人：王璐 周振斌 |
联系方式 ：+86-10-******** ******** |
CEIEC entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2015-03-06. |
1.Bidding Conditions |
Overview：Equipment Procurement for Project of FPD Engineering Technology R&D Center by Nanjing CEC Panda FPD Technology Co., Ltd. |
Source of Funds：OK |
Description of The Prepared Bidding Conditions：OK |
2.Bidding Content： |
Bidding No：0714-1440CECNJXM6/21-24, 26-29 |
Project Name：Project of FPD Engineering Technology R&D Center by Nanjing CEC Panda FPD Technology Co., Ltd. |
Place of Implementation：Nanjing, Jiangsu, P.R. China |
List of Products： |
NO. | Product Name | Quantity | Main Technical Data | Remarks | 0714-1440CECNJXM6/21 | Seal Bake Oven, PI Post Bake Equipment and CF Oven (R&D Line) | 3 sets | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. | 0714-1440CECNJXM6/22 | TMAH developer dilution equipment（R&D Line） | 1 set | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. | 0714-1440CECNJXM6/23 | Array Titler/Edge Exposure Equipment and BM Titler Equipment(R&D line) | 2 sets | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. | 0714-1440CECNJXM6/24 | Excimer Ultraviolet Cleaning Equipment（R&D Line） | 7 sets | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. | 0714-1440CECNJXM6/26 | LCD module development equipment | 1 set | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. | 0714-1440CECNJXM6/27 | WET Etching Equipment (R&D Line-Gate,Source, Oxide Film,ITO) | 2 sets | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. | 0714-1440CECNJXM6/28 | Proximity Exposure Equipment（R&D Line） | 1 set | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. | 0714-1440CECNJXM6/29 | AMHS (R&D Line) | 1 set | Equipment Description: This equipment system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service. |
|
3.Qualification Requirements For Bidder |
Qualifications or Performance：Bidders are legal persons or other organizations who participate in bidding. This Invitation for Bids is open to all suppliers from within the Peoples Republic of China (hereinafter abb. as "PRC") and all countries/areas which have regular trade relations with PRC. Bidders must pay for the bidding documents and register for the record, otherwise the bidder has no qualification to attend the bid. |
Joint Bids：NOT Available |
Bid without the bidding documents：NOT Available |
4.Acquisition of Bidding Documents |
Beginning of Selling Bidding Documents：2015-03-06 |
Ending of Selling Bidding Documents：2015-03-13 |
To Obtain：On-site Purchase |
Place：Level 21, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Price of Bidding Documents: Please See Bidding Documents |
Additional Instructions：For bidding documents price, please see List of Products. Specific time of Selling Bidding Documents：2015-3-6 9:00 to 2015-3-13 16:30 （Beijing Time）(except holidays and lunch break) |
5.Bid Submission |
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)：2015-03-27 10:00 |
Place of Bid：China National Electronics Import & Export Corporation, Level 19, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Place of Bid Opening：China National Electronics Import & Export Corporation, Level 19, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
6.The evaluation results will be released on www.chinabidding.com。 |
7.Contact Details |
Purchasers：Nanjing CEC Panda FPD Technology Co., Ltd. |
Add.：Keji South Road, Xianlin Avenue, QiXia District, Nanjing, China |
Contact：Chen Lu |
Tel：+86-25-******** |
Bidding Agency：CEIEC |
Add.：New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Contact：Wang Lu, Zhou Zhenbin |
Tel ：+86-10-********, ******** |
