越南顺化铝制二片罐线招标公告
越南顺化铝制二片罐线招标公告
| 越南顺化铝制二片罐线项目项目招标公告 | |||
| 发布日期：2015-04-14 | |||
| 招标编号：****-*******JJ480 | |||
| 上海宝华国际招标有限公司(以下称招标机构)受上海宝钢包装股份有限公司(以下称买方)委托，就其越南顺化铝制二片罐线项目项目所需的下列货物进行国际公开招标，邀请合格投标人进行网上电子投标。 | |||
| 1. | 招标货物名称、数量、技术规格和资金来源： | ||
| 包1：上卷系统 | |||
| 1)货物名称：上卷系统; | |||
| 2)数量：1套; | |||
| 3)主要技术参数：1）最大载重量：13.6吨2）最大铝卷宽度：1850 mm3）其他：详见招标技术文件要求；; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包2：冲杯机 | |||
| 1)货物名称：冲杯机; | |||
| 2)数量：1套; | |||
| 3)主要技术参数：1) 最高速度不低于 250 spm;2）其他详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包3：拉伸机 | |||
| 1)货物名称：拉伸机; | |||
| 2)数量：6套; | |||
| 3)主要技术参数：1) 拉伸机行程24 inch.2) 最大拉伸速度：400cpm3) 其他详见招标文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包4：彩印机 | |||
| 1)货物名称：彩印机; | |||
| 2)数量：1套; | |||
| 3)主要技术参数：1）最大速度 2200 cpm;2) 其他详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包5：内喷机 | |||
| 1)货物名称：内喷机; | |||
| 2)数量：6套; | |||
| 3)主要技术参数：1）单台设备的最大速度: ≥350 cpm;2) 其他详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包6：缩颈翻边机 | |||
| 1)货物名称：缩颈翻边机; | |||
| 2)数量：1套（含缩颈机1套，修边机6套，BRC1套）; | |||
| 3)主要技术参数：1）缩颈机最大速度: 2400 cpm；2）修边机最大速度: 400 cpm;3) 其他：详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包7：清洗机 | |||
| 1)货物名称：清洗机; | |||
| 2)数量：1套; | |||
| 3)主要技术参数：1)最大清洗速度：3000 cpm.2)其他详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包8：烘炉 | |||
| 1)货物名称：烘炉; | |||
| 2)数量：3套(含Washer Oven(1), Pin oven(1), IBO(1））; | |||
| 3)主要技术参数：1) 清洗烘干炉: 设计速度3000 cpm;2）涂层烘干炉：设计速度2400 cpm;3）内喷烘炉(IBO)设计速度3000 cpm;4) 其他：详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包9：堆垛、捆扎、打包 | |||
| 1)货物名称：堆垛、捆扎、打包; | |||
| 2)数量：包括堆垛1套、捆扎2套、打包1套; | |||
| 3)主要技术参数：1）堆垛速度3000 cpm;2) 捆扎速度 ≥30 stacks（每小时）3) 打包速度: 每分钟不低于 30 pallets 4) 其他：详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包10：输送系统及线控 | |||
| 1)货物名称：清洗机; | |||
| 2)数量：1套; | |||
| 3)主要技术参数：1）线速度：3000 cpm; 2）其他要求详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包11：模具系统 | |||
| 1)货物名称：模具系统; | |||
| 2)数量：1套（包括Die set 2套；,拉伸机模具1套; | |||
| 3)主要技术参数：1）Dieset适用的卷宽为1,820mm；2）拉伸机模具必须适用于铝罐；3）其他要求详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包12：空压机 | |||
| 1)货物名称：空压机; | |||
| 2)数量：3套; | |||
| 3)主要技术参数：1）空气流量 :≥41Nm3/min; 空气压力: ≥0.8MPa;2）其他要求详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包13：叉车 | |||
| 1)货物名称：叉车; | |||
| 2)数量：3套(12t 1台；2t 3台）; | |||
| 3)主要技术参数：1）12t叉车：当载荷中心为1000mm, 装载能力不低于 12 t;提升高度不低于3700mm;2）2t叉车：当载荷中心为 500mm, 装载能力不低于 2 t;提升高度不低于5400mm；3）其他要求详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 包14：精密内圆磨床 | |||
| 1)货物名称：精密内圆磨床; | |||
| 2)数量：1套; | |||
| 3)主要技术参数：1）具有内外圆弧磨削的能力；2）其他要求详见招标技术文件; | |||
| 4)资金来源：自筹资金(现汇项目); | |||
| 2. | 交货地点和交货时间： | ||
| 包1：上卷系统 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日投标方工厂交货 | |||
| 包2：冲杯机 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日投标方工厂交货 | |||
| 包3：拉伸机 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日投标方工厂交货 | |||
| 包4：彩印机 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日(EXW) | |||
| 包5：内喷机 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日(EXW) | |||
| 包6：缩颈翻边机 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日(EXW) | |||
| 包7：清洗机 | |||
| 1)交货地点：CIF越南岘港 | |||
| 2)交货时间：2015年9月30日投标方工厂交货 | |||
| 包8：烘炉 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日投标方工厂交货 | |||
| 包9：堆垛、捆扎、打包 | |||
| 1)交货地点：CIF 越南岘港 | |||
| 2)交货时间：2015年9月30日投标方工厂交货 | |||
| 包10：输送系统及线控 | |||
| 1)交货地点：投标方（卖方）工厂 | |||
| 2)交货时间：2015年9月1日 | |||
| 包11：模具系统 | |||
| 1)交货地点：投标方（卖方）工厂 | |||
| 2)交货时间：2015年9月1日 | |||
| 包12：空压机 | |||
| 1)交货地点：CIF 越南岘港厂 | |||
| 2)交货时间：2015年9月1日投标方工厂交货 | |||
| 包13：叉车 | |||
| 1)交货地点：投标方（卖方）工厂 | |||
| 2)交货时间：2015年9月1日 | |||
| 包14：精密内圆磨床 | |||
| 1)交货地点：投标方（卖方）工厂 | |||
| 2)交货时间：2015年9月1日 | |||
| 3. | *凡确认投标的投标人请登录中国国际招标网(http://www.chinabidding.com/)，务必在开标前注册为其会员并通过年检以获得投标资格，中标情况将在中国国际招标网公示。 | ||
| 4. | 宝华国际招标网(http://www.baosteelbidding.com)可同时提供我公司的招标项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后，投标人可在宝华国际招标网上在线购买招标文件，进行投标和开标活动。 | ||
| 5. | 购买招标文件时间： | ||
| 包1：上卷系统 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包2：冲杯机 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包3：拉伸机 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包4：彩印机 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包5：内喷机 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包6：缩颈翻边机 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包7：清洗机 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包8：烘炉 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包9：堆垛、捆扎、打包 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包10：输送系统及线控 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包11：模具系统 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包12：空压机 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包13：叉车 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 包14：精密内圆磨床 | |||
| 1)购买招标文件时间：2015-04-14 ~ 2015-04-21（每天9:00－11:00，13:00-16:00，节假日除外） | |||
| 6. | 招标文件售价：招标文件英文版及中文版一套（电子版），若中文和英文版有冲突以中文版为准。 | ||
| 包1：上卷系统 | |||
| 售价为人民币1000元或125美元整。 | |||
| 包2：冲杯机 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包3：拉伸机 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包4：彩印机 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包5：内喷机 | |||
| 售价为人民币1200元或150美元整。 | |||
| 包6：缩颈翻边机 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包7：清洗机 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包8：烘炉 | |||
| 售价为人民币1200元或150美元整。 | |||
| 包9：堆垛、捆扎、打包 | |||
| 售价为人民币1200元或150美元整。 | |||
| 包10：输送系统及线控 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包11：模具系统 | |||
| 售价为人民币1500元或200美元整。 | |||
| 包12：空压机 | |||
| 售价为人民币1000元或125美元整。 | |||
| 包13：叉车 | |||
| 售价为人民币1000元或125美元整。 | |||
| 包14：精密内圆磨床 | |||
| 售价为人民币1000元或125美元整。 | |||
| 招标文件均按包进行计价出售，投标人成功购标后，自行下载招标文件和投标文件模板。招标文件一经售出不得退还。 | |||
| 7. | 投标截止时间和开标时间： | ||
| 包1：上卷系统 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包2：冲杯机 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包3：拉伸机 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包4：彩印机 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包5：内喷机 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包6：缩颈翻边机 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包7：清洗机 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包8：烘炉 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包9：堆垛、捆扎、打包 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包10：输送系统及线控 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包11：模具系统 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包12：空压机 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包13：叉车 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 包14：精密内圆磨床 | |||
| 1)投标截止时间：2015-05-05 09:30（北京时间）。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。 | |||
| 8. | 开标方式： | ||
| 包1：上卷系统 | |||
| 电子一步法 | |||
| 包2：冲杯机 | |||
| 电子一步法 | |||
| 包3：拉伸机 | |||
| 电子一步法 | |||
| 包4：彩印机 | |||
| 电子一步法 | |||
| 包5：内喷机 | |||
| 电子一步法 | |||
| 包6：缩颈翻边机 | |||
| 电子一步法 | |||
| 包7：清洗机 | |||
| 电子一步法 | |||
| 包8：烘炉 | |||
| 电子一步法 | |||
| 包9：堆垛、捆扎、打包 | |||
| 电子一步法 | |||
| 包10：输送系统及线控 | |||
| 电子一步法 | |||
| 包11：模具系统 | |||
| 电子一步法 | |||
| 包12：空压机 | |||
| 电子一步法 | |||
| 包13：叉车 | |||
| 电子一步法 | |||
| 包14：精密内圆磨床 | |||
| 电子一步法 | |||
| 9. | 开标信息： | ||
| 包1：上卷系统 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包2：冲杯机 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包3：拉伸机 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包4：彩印机 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包5：内喷机 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包6：缩颈翻边机 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包7：清洗机 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包8：烘炉 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包9：堆垛、捆扎、打包 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包10：输送系统及线控 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包11：模具系统 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包12：空压机 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包13：叉车 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 包14：精密内圆磨床 | |||
| 1)开标时间：同投标截止时间（北京时间）。 | |||
| 2)开标地点：宝华招标网本项目开标大厅 | |||
| 10. | *投标条件及资格要求： | ||
| 包1：上卷系统 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流并签订技术附件。 | |||
| 包2：冲杯机 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包3：拉伸机 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包4：彩印机 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包5：内喷机 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包6：缩颈翻边机 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包7：清洗机 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包8：烘炉 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包9：堆垛、捆扎、打包 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包10：输送系统及线控 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包11：模具系统 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包12：空压机 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包13：叉车 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 包14：精密内圆磨床 | |||
| 1)投标条件及资格要求：1）近五年内有同类设备的供货业绩（提供业绩表），且在两片罐生产线上有成功的经验，在国际上被广泛使用。2）投标人必须在开标日十天前与招标人进行技术交流,并签订技术附件 | |||
| 11. | 联合体投标： | ||
| 包1：上卷系统 | |||
| 本项目不允许联合体投标 | |||
| 包2：冲杯机 | |||
| 本项目不允许联合体投标 | |||
| 包3：拉伸机 | |||
| 本项目不允许联合体投标 | |||
| 包4：彩印机 | |||
| 本项目不允许联合体投标 | |||
| 包5：内喷机 | |||
| 本项目不允许联合体投标 | |||
| 包6：缩颈翻边机 | |||
| 本项目不允许联合体投标 | |||
| 包7：清洗机 | |||
| 本项目不允许联合体投标 | |||
| 包8：烘炉 | |||
| 本项目不允许联合体投标 | |||
| 包9：堆垛、捆扎、打包 | |||
| 本项目不允许联合体投标 | |||
| 包10：输送系统及线控 | |||
| 本项目不允许联合体投标 | |||
| 包11：模具系统 | |||
| 本项目不允许联合体投标 | |||
| 包12：空压机 | |||
| 本项目不允许联合体投标 | |||
| 包13：叉车 | |||
| 本项目不允许联合体投标 | |||
| 包14：精密内圆磨床 | |||
| 本项目不允许联合体投标 | |||
| 12. | 客服热线：0086-400-821-0772（有关投标人CA办理事项的咨询） | ||
| 传真：0086-21-******** | |||
| 网上购标方法：具体操作方法详见宝华招标网“操作指南”。 | |||
| 项目经理：施学美（有关招标项目商务、技术问题可致电项目经理。） | |||
| 电 话：******** | |||
| 传 真：******** | |||
| 电子邮件：shixuemei@baosteel.com | |||
| 业务助理：方小慧 | |||
| 电 话：***-******** | |||
| 招标机构地址：上海市宝山区克山路550弄果园公寓8号楼 | |||
| 邮 编：201999 | |||
| 收 款 人：上海宝华国际招标有限公司 | |||
| 开户银行：建行宝钢宝山支行 | |||
| 人民币银行账号：****************9757 | |||
| 欧元银行账号：****************0041 | |||
| 美元银行账号:****************0041 | |||
| 日元银行账号：****************0041 | |||
| Swift Code：PCBCCNBJSHX | |||
| Issue Date：2015-04-14 | |||
| Tendering No.：****-*******JJ480 | |||
| Shanghai Baohua International Tendering Co., Ltd.（Hereinafter referred to as Tendering Agency）is commissioned by null（Hereinafter referred to as tenderer）on international open bidding for the following goods required in Aluminum Two-piece Cans in In Hue City and invites eligible bidders to online e-bidding。 | |||
| 1. | The name, quantity, technical specifications and fund sources of goods for tendering： | ||
| Bid 1：Coil Line System | |||
| 1)The name：Coil Line System; | |||
| 2)Quantity：1set; | |||
| 3)Technical specifications：1) Max load capacity: 13.6 t2) Max coil width: 1850 mm3) Others: Please refer to the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 2：Cupper Press | |||
| 1)The name：Cupper Press; | |||
| 2)Quantity：1set; | |||
| 3)Technical specifications：1) Maximum speed shall not be lower than 250 spm; 2)Others:Please refer to the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 3：Bodymaker | |||
| 1)The name：Bodymaker; | |||
| 2)Quantity：6 sets; | |||
| 3)Technical specifications：1) Stroke is 24 inch.2) Maximum speed of single equipment can reach 400 cpm.3)Others:Please refer the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 4：Decorator | |||
| 1)The name：Decorator; | |||
| 2)Quantity：1 set; | |||
| 3)Technical specifications：1）Speed: maximum speed is 2200 cpm;2) Others:Please refer the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 5：Inside Spray Machine | |||
| 1)The name：Inside Spray Machine; | |||
| 2)Quantity：6 sets; | |||
| 3)Technical specifications：1)Maximum operation speed of each set: ≥350 cpm;2)others:Please refer the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 6：Necker & Trimmer | |||
| 1)The name：Necker & Trimmer; | |||
| 2)Quantity：1 set(including Necker(1),Trimmer(6),BRC(1)); | |||
| 3)Technical specifications：1）Necker：Max Speed 2400 cpmthe ;2）Trimmer：Max Speed 400 cpm;3）others：Please refer to the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 7：Washer | |||
| 1)The name：Washer; | |||
| 2)Quantity：1 set; | |||
| 3)Technical specifications：1) Max speed of washer is 3000 cpm.2)others:Please refer the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 8：Oven | |||
| 1)The name：Oven; | |||
| 2)Quantity：total 3 sets(Washer Oven(1), Pin oven(1), IBO(1)); | |||
| 3)Technical specifications：1) Washer Oven: Designed speed of equipment: 3000 cpm;2）Decorator Pin Oven:Designed speed of equipment: 2400 cpm;3）Internal bake oven (IBO)Designed speed of equipment: 3000 cpm;4) others: Please refer to thedering document\; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 9：Palletizer, Strapper, Wrapper | |||
| 1)The name：Palletizer, Strapper, Wrapper; | |||
| 2)Quantity：Including Palletizer(1) , Strapper(2), Wrapper(1); | |||
| 3)Technical specifications：1）Palletizer system Speed: 3000 cpm;2) Strapper Production speed ≥30 stacks per hour3) WrapperSpeed: no less than 30 pallets per hourthe4) others: Please refer to the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 10：Conveying system | |||
| 1)The name：Conveying system; | |||
| 2)Quantity：1 set; | |||
| 3)Technical specifications：Please refer the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 11：Tooling system | |||
| 1)The name：Tooling system; | |||
| 2)Quantity：1 set（Including Die set( 2 sets), BM tooling(1 set）; | |||
| 3)Technical specifications：1)The Dieset shall accommodate maximum width of coil of 1,820mm2)the material of BM tooling must be suitable for the Aluminium cans;3）others:Please refer the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 12：Air compressor | |||
| 1)The name：Air compressor; | |||
| 2)Quantity：3 sets; | |||
| 3)Technical specifications：1)Air flow :≥41Nm3/min; Air pressure: ≥0.8MPa;2）others:Please refer the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 13：Fork Lifters | |||
| 1)The name：Air compressor; | |||
| 2)Quantity：3 sets; | |||
| 3)Technical specifications：1)12t Fork Lifters: When the loading center is at 1000mm, the loading capacity can not be less 12 t;Lifting height can not less 3700mm;2)2t Fork Lifters:When the loading center is at 500mm, the loading capacity can not be less 2 t;Lifting height can not less 5400mm;3)others: please refer to the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| Bid 14：Precision inner grinder | |||
| 1)The name：Air compressor; | |||
| 2)Quantity：3 sets; | |||
| 3)Technical specifications：1)the capacity for grinding both Inner and outer arc2)others: please refer to the tendering document; | |||
| 4)Fund sources of goods：Self-raised funds(Cash items); | |||
| 2. | Delivery time and place： | ||
| Bid 1：Coil Line System | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30st,Sep,2015 | |||
| Bid 2：Cupper Press | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30st,Sept,2015（EXW） | |||
| Bid 3：Bodymaker | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30th,Sept,2015(EXW) | |||
| Bid 4：Decorator | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30th,Sept.,2015（EXW） | |||
| Bid 5：Inside Spray Machine | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30th,Sept,2015(EXW) | |||
| Bid 6：Necker & Trimmer | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30th,Sept.2015(EXW) | |||
| Bid 7：Washer | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30th,Sept.,2015 (EXW) | |||
| Bid 8：Oven | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30th,Sept.,2015 (EXW) | |||
| Bid 9：Palletizer, Strapper, Wrapper | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：30th,Sept.,2015 (EXW) | |||
| Bid 10：Conveying system | |||
| 1)Delivery place：the bidders factory(Manfacture factory) | |||
| 2)Delivery time：1st,Sep,2015 | |||
| Bid 11：Tooling system | |||
| 1)Delivery place：the bidders factory(Manfacture factory) | |||
| 2)Delivery time：1st,Sep,2015 | |||
| Bid 12：Air compressor | |||
| 1)Delivery place：CIF Danang Vietnam | |||
| 2)Delivery time：1st,Sept.,2015(EXW) | |||
| Bid 13：Fork Lifters | |||
| 1)Delivery place：the bidders factory(Manfacture factory) | |||
| 2)Delivery time：1st,Sep,2015 | |||
| Bid 14：Precision inner grinder | |||
| 1)Delivery place：the bidders factory(Manfacture factory) | |||
| 2)Delivery time：1st,Sep,2015 | |||
| 3. | *The bidders who have confirmed to participate the bid must log on China International Bidding Website(http://www.chinabidding.com/))，and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website. | ||
| 4. | Baohua E-bidding website http://www.baosteelbidding.com)could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online. | ||
| 5. | Time for purchasing Tendering Documents： | ||
| Bid 1：Coil Line System | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 2：Cupper Press | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 3：Bodymaker | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 4：Decorator | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 5：Inside Spray Machine | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 6：Necker & Trimmer | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 7：Washer | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 8：Oven | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 9：Palletizer, Strapper, Wrapper | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 10：Conveying system | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 11：Tooling system | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 12：Air compressor | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 13：Fork Lifters | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| Bid 14：Precision inner grinder | |||
| Time for purchasing Tendering Documents：2015-04-14 ~ 2015-04-21(9:00 -11:00, 13:00-16:00 each day, except for holidays). | |||
| 6. | Sales prices of the tendering document：One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language. | ||
| Bid 1：Coil Line System | |||
| Sales price is CNY 1000 or USD 125。 | |||
| Bid 2：Cupper Press | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid 3：Bodymaker | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid 4：Decorator | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid 5：Inside Spray Machine | |||
| Sales price is CNY 1200 or USD 150。 | |||
| Bid 6：Necker & Trimmer | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid 7：Washer | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid 8：Oven | |||
| Sales price is CNY 1200 or USD 150。 | |||
| Bid 9：Palletizer, Strapper, Wrapper | |||
| Sales price is CNY 1200 or USD 150。 | |||
| Bid 10：Conveying system | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid 11：Tooling system | |||
| Sales price is CNY 1500 or USD 200。 | |||
| Bid 12：Air compressor | |||
| Sales price is CNY 1000 or USD 125。 | |||
| Bid 13：Fork Lifters | |||
| Sales price is CNY 1000 or USD 125。 | |||
| Bid 14：Precision inner grinder | |||
| Sales price is CNY 1000 or USD 125。 | |||
| All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable. | |||
| 7. | Deadline for bid submission and Bid Opening Time： | ||
| Bid 1：Coil Line System | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 2：Cupper Press | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 3：Bodymaker | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 4：Decorator | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 5：Inside Spray Machine | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 6：Necker & Trimmer | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 7：Washer | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 8：Oven | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 9：Palletizer, Strapper, Wrapper | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 10：Conveying system | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 11：Tooling system | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 12：Air compressor | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 13：Fork Lifters | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| Bid 14：Precision inner grinder | |||
| 1)Deadline for bid submission and Bid Opening Time：2015-05-05 09:30(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline. | |||
| 8. | Bid opening style： | ||
| Bid 1：上卷系统 | |||
| E-biddingOne-step of opening | |||
| Bid 2：冲杯机 | |||
| E-biddingOne-step of opening | |||
| Bid 3：拉伸机 | |||
| E-biddingOne-step of opening | |||
| Bid 4：彩印机 | |||
| E-biddingOne-step of opening | |||
| Bid 5：内喷机 | |||
| E-biddingOne-step of opening | |||
| Bid 6：缩颈翻边机 | |||
| E-biddingOne-step of opening | |||
| Bid 7：清洗机 | |||
| E-biddingOne-step of opening | |||
| Bid 8：烘炉 | |||
| E-biddingOne-step of opening | |||
| Bid 9：堆垛、捆扎、打包 | |||
| E-biddingOne-step of opening | |||
| Bid 10：输送系统及线控 | |||
| E-biddingOne-step of opening | |||
| Bid 11：模具系统 | |||
| E-biddingOne-step of opening | |||
| Bid 12：空压机 | |||
| E-biddingOne-step of opening | |||
| Bid 13：叉车 | |||
| E-biddingOne-step of opening | |||
| Bid 14：精密内圆磨床 | |||
| E-biddingOne-step of opening | |||
| 9. | Biding opening place： | ||
| Bid 1：Coil Line System | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 2：Cupper Press | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 3：Bodymaker | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 4：Decorator | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 5：Inside Spray Machine | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 6：Necker & Trimmer | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 7：Washer | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 8：Oven | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 9：Palletizer, Strapper, Wrapper | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 10：Conveying system | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 11：Tooling system | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 12：Air compressor | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 13：Fork Lifters | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| Bid 14：Precision inner grinder | |||
| 1)Bid Opening Time：2015-05-05 09:30 | |||
| 2)E-Biding opening place：Bid opening hall on Baohua Tendering net | |||
| 10. | *Requirements of Bidder’s qualification： | ||
| Bid 1：Coil Line System | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 2：Cupper Press | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 3：Bodymaker | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 4：Decorator | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 5：Inside Spray Machine | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 6：Necker & Trimmer | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 7：Washer | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 8：Oven | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 9：Palletizer, Strapper, Wrapper | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 10：Conveying system | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 11：Tooling system | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 12：Air compressor | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 13：Fork Lifters | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| Bid 14：Precision inner grinder | |||
| 1)Requirements of Bidder’s qualification：1) There are performance record and rich experiences about supplying the similar equipment in recent 5 years (the reference document to be offered), and the two-piece can-making line shall have been widely used in the world.2)The bidder must conduct and make agreement on the technical exchange with the tenderee no later than ten (10) days before bidding open. | |||
| 11. | Bidding consortium： | ||
| Bid 1：上卷系统 | |||
| This project no consortium bidding is accepted | |||
| Bid 2：冲杯机 | |||
| This project no consortium bidding is accepted | |||
| Bid 3：拉伸机 | |||
| This project no consortium bidding is accepted | |||
| Bid 4：彩印机 | |||
| This project no consortium bidding is accepted | |||
| Bid 5：内喷机 | |||
| This project no consortium bidding is accepted | |||
| Bid 6：缩颈翻边机 | |||
| This project no consortium bidding is accepted | |||
| Bid 7：清洗机 | |||
| This project no consortium bidding is accepted | |||
| Bid 8：烘炉 | |||
| This project no consortium bidding is accepted | |||
| Bid 9：堆垛、捆扎、打包 | |||
| This project no consortium bidding is accepted | |||
| Bid 10：输送系统及线控 | |||
| This project no consortium bidding is accepted | |||
| Bid 11：模具系统 | |||
| This project no consortium bidding is accepted | |||
| Bid 12：空压机 | |||
| This project no consortium bidding is accepted | |||
| Bid 13：叉车 | |||
| This project no consortium bidding is accepted | |||
| Bid 14：精密内圆磨床 | |||
| This project no consortium bidding is accepted | |||
| 12. | Customer service hotline：0086-400-821-0772 (consulting for bidders CA affairs) | ||
| Fax：021-******** | |||
| Online tendering document purchase：please refer to "HELP" for details on Baohua tendering website. | |||
| Bid manager：Shi Xuemei(contact project leader for commercial, technical problems of tendering project) | |||
| Tel：******** | |||
| Fax：******** | |||
| E-mail：shixuemei@baosteel.com | |||
| Business assistant：Fang Xiaohui | |||
| Tel：***-******** | |||
| Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China | |||
| Post code：201999 | |||
| Beneficiary： Shanghai Baohua International Tendering Co., Ltd. | |||
| Bank account：China Construction Bank Baoshan Branch | |||
| RMB Accounting Number:****************9757 | |||
| EUR Accounting Number****************0041 | |||
| USD Accounting Number：****************0041 | |||
| JPY Accounting Number：****************0041 | |||
| Swift Code：PCBCCNBJSHX | |||
标签:
0人觉得有用|
招标
|
- 关注我们可获得更多采购需求 |
关注 |
最近搜索
无
热门搜索
无
