第五章 投标邀请

招标项目名称：乐东10-1气田开发工程项目控制阀

招标编号（Bid No.）：0704-2340JDCP0108

日 期：2023年1月19日

中化建国际招标有限责任公司（以下称为“招标代理机构”）受中海石油（中国）有限公司（以下称为“招标人”）委托，就乐东10-1气田开发工程项目所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交密封投标：

1.招标条件

项目概况：乐东10-1气田开发项目依托乐东22-1CEP平台进行开发，新建1座无人井口平台LD10-1WHPA，新建一条混输海管和一条海缆，产出物流输送至乐东22-1CEP平台进行处理和外输，并对乐东22-1CEP平台进行适应性改造。气田范围内平均水深90m。

资金到位或资金来源落实情况：已落实。

项目已具备招标条件的说明：已具备。

2.招标内容

货物名称：控制阀

数量：气动控制阀8套、电液控制阀2套、自力式调节阀2套

主要技术规格：

电液控制阀：阀门尺寸不低于8"且压力不低于150LB

自力式调节阀：阀门尺寸不低于1"且压力不低于150LB

气动控制阀：阀门尺寸不低于12"且压力不低于900LB

交货期：2023年7月30日

交货地点：

从中华人民共和国关境内提供的货物：乐东10-1项目湛江建造场地

从中华人民共和国关境外提供的货物: DAP乐东10-1项目湛江建造场地

3.对投标人的资格和业绩要求：

(1)资格要求

A．如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或三证合一的营业执照，并加盖公章；

如果投标人为境外注册公司，需提供有效的公司登记注册证明；

B.制造商通过ISO9001（或GB/T*****）质量体系认证。投标人须提供制造商有效的质量体系认证证书；

C.国内产品不允许代理商投标，境外产品接受代理商投标。境外产品使用代理商投标时，投标人应得到本次投标所投产品境外制造商的同意，并提供该产品的合法唯一代理授权书。

D.是否接受联合体投标：否

E.未领购招标文件是否可以参加投标:不可以

F.其它：无

(2)业绩要求:

2013年1月1日至投标截止日（以合同签署时间为准），投标人所投产品的制造商应满足以下业绩要求：

a) 对于电液控制阀产品应具有两个工程项目（技术规格：阀门尺寸不低于8"且压力不低于150LB）的供货业绩，投标人须提交相关业绩证明文件。

b) 对于自力式调节阀产品具有两个工程项目（技术规格：阀门尺寸不低于1"且压力不低于150LB）的供货业绩，投标人须提交相关业绩证明文件。

c) 对于气动控制阀产品应具有两个工程项目（技术规格：阀门尺寸不低于12"且压力不低于900LB）的供货业绩，投标人须提交相关业绩证明文件。

业绩证明文件包括但不限于：1）销售合同复印件（含相关技术附件）和2）到货验收证明文件。投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、制造商名称、货物名称、项目名称、阀门类型、阀门尺寸、阀门压力等级及到货验收材料。 未提交业绩证明文件，或所提供的业绩证明文件无法体现合同签署时间、制造商名称、货物名称、项目名称、阀门类型、阀门尺寸、阀门压力等级及到货验收材料的，均视为无效业绩。

4.有兴趣的投标人可通过以下方式获取招标文件：从2023年1月19日开始至2023年2月2日止，请登录中国海油采办业务管理与交易系统(https://buy.cnooc.com.cn）的招标公告页面进行购买。首次登录必须先进行注册（免费），注册成功后，方可购买招标文件。投标人须在线填写购买招标文件登记表，并在线支付标书款，支付成功后，投标人可自行下载招标文件。招标文件每套售价为200元人民币或30美元，售后不退。对于使用美元购买招标文件的投标人，需电汇至以下账号：收款人：中化建国际招标有限责任公司，收款行名称：INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch，收款人账号：020*****091********，SWIFT CODE: ICBKCNBJBJM，收款行地址：No. 237 Wang fujing Street, Dongcheng District, Beijing, ChinaPR: ******。

5.投标文件的递交

投标截止时间（开标时间）：2023年2月13日上午10：00

投标文件送达地点：北京市东城区东直门外小街6号海油大厦4层会议室

开标地点：北京市东城区东直门外小街6号海油大厦4层会议室

在此时间后收到的投标文件恕不接受。

6.本次招标公告同时在中国国际招标网站（http://www.chinabidding.com）和中海油采办业务管理与交易系统（https://buy.cnooc.com.cn）上发布。

7.投标人在投标前应在必联网（https://www.ebnew.com）或机电产品招标投标电子交易平台（https://www.chinabidding.com）完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。

8.联系方式：

招标人：中海石油（中国）有限公司

地 址：海南省海口市秀英区西海岸长滨三路6号荣城铂郡中国海油大楼14楼

联系人：景蔚然

电话Tel：+86-898-********

电子信箱Email：jingwr@cnooc.com.cn

招标代理机构：中化建国际招标有限责任公司

地 址：北京市东城区东直门外小街6号海油大厦四层，邮编******

联 系 人：陈偲聪

电话：+86 10 ********

电子信箱：chensc2@cncccitc.com.cn

9.异议渠道

异议须在机电产品招标投标电子交易平台（www.chinabidding.com)和中海油采办业务管理与交易系统（https://buy.cnooc.com.cn）上同时提出。

Objections need to be proposed on www.chinabidding.comand https://buy.cnooc.com.cnat the same time.

异议联系人：陈偲聪

Contact Person: Chen Sicong

联系方式：86-10-********

Tel: 86-10-********

Section 5．Invitation for Bids

ProjectName: Ledong 10-1 Gas Field Development ProjectControl Vavle（Name of Goods）

Bid No.：0704-2340JDCP0108

Date:19th,Jan, 2023

CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted byCNOOC China Limited(hereinafter referred to as “Tenderee” ), intends to purchase the Goods and the relevant services required under the project ofLedong 10-1 Gas Field Development Projectby International Competitive Bidding. The Bidders are kindly requested to provide the following Goods and services with sealed bids.

1.Bidding Conditions

Project Summary： Ledong 10-1 Gas Field Development Project is developed by relying on Ledong22-1CEP platform. An unmanned wellhead platform LeDong 10-1WHPA is built, a multiphase subsea pipeline and a seacable are built, and the output is transported to LeDong22-1CEP platform for processing and external transport, and LeDong22-1CEP platform for adaptive modification. The average water depth in the field is 90m.

Source of Funds: yes

Description of The Prepared Bidding Conditions: yes

2.Bidding Contents

Name of Goods：Control Vavle

Quantity:

Pneumatic Control Valve 8sets.

Electro-hydraulic Control Valve 2 sets.

Self-actuated Pressure Regulator 2 sets.

Main Specifications:

Electro-hydraulic control valve: valve size not less than 8”and pressure not less than 150LB

Self-operated control valve: valve size not less than 1”and pressure not less than 150LB

Pneumatic control valve:valve size not less than 12”and pressure not less than 900LB

Delivery Schedule:July.30.2023

Destination of delivery：

For goods offered from within PRC customs territory:ZhanJiang construction site of Ledong 10-1 project

For goods offered from outside PRC customs territory:DAP ZhanJiang construction site of Ledong 10-1 project.

3. Requirements for Qualification and reference of Bidder:

（1）Requirements for Qualification of Bidder

A.The bidder within the customs territory shall provide sealed valid independent legal person business license, tax registration certificate, organization code certificate, or three in one business license;

The bidder outside the customs territory shall provide valid certificateto prove business registration certificate.

B.The manufacturer of the Bid Goods shall pass Quality Management System CertificationISO9001（or GB/T*****）Certification. Bidder shall provide valid Certificate of Quality Management System Certification of manufacturer.

C.Agents are not allowed to bid for domestic products, and agents are allowed to bid for overseas products. If the bidder is an agent, bidder shall obtain the legal and onlyformal authorization from the manufacturer of the goods to provide the goods for this bidding.

D.Joint Venture: Not Accepted

E.Bid without the bidding documents：NOT Available

（2）Requirement for Bidder"s reference:
From January 1, 2013 to the deadline for submission of bids (Subject to the date of signing the contract).The manufacturer of the bidder’s product shall meet the following performance requirements:

a)For electro-hydraulic control valve products should have two project performances (technical specification: valve size not less than 8”and pressure not less than 150LB) , the bidder shall submit relevant performance certificates.

b)For self-operated control valve products should have two project performances (technical specification: valve size not less than 1”and pressure not less than 150LB) , the bidder shall submit relevant performance proof.

c)For pneumatic control valve products should have two project performances (technical specifications: valve size not less than 12”and pressure not less than 900LB) supply performance, the bidder must submit relevant performance documents.

Performance certificates include but are not limited to: 1) copies of sales contracts (including relevant technical annexes) and 2) certificates of arrival acceptance.

The performance certificates submitted by the tenderer must at least reflect the following contents: contract signing time, manufacturer name, goods name, project name, valve type, valve size, valve pressure level and other technical requirements, as well as arrival acceptance materials. If no performance certificate is submitted, or the provided performance certificate fails to reflect the contract signing time, manufacturer name, goods name, project name, valve type, valve size, valve pressure rating and arrival acceptance materials, it shall be deemed as invalid performance.

4. The interested Bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System (https://buy.cnooc.com.cn) on the page of Invitation for bid for purchasing Bidding Document from 19th Jan, 2023to2nd Feb,2023For the first time of login, a registration (free of charge) is needed and only after successful registration,Bidder can purchase Bidding documents online.The bidder shall fill in the registration form for purchasing bidding documents online and pay the bid price online,after successful payment, the bidder can download the bidding documents by itself. The price of each set of bidding documents is RMB200 or USD30, and it is non refundable after sales. For the bidder who purchases the bidding documents in US dollars, it is required to wire transfer to the following account number:

Payee:CNCCC International Tendering Co., Ltd.

Bank:INDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch：

Account:020*****091********;

SWIFT CODE: ICBKCNBJBJM，

Bank Address：No. 237 Wang fu jing Street, Dongcheng District, Beijing, ChinaPR,******.

5.Submission of bid

The deadline of for submission of bid(bid opening time):?10:00?a.m.?on?13th.?Feb.?2023

The place for submission of bid:Meeting room of Floor 4 CNOOC Tower, No. 6 Dongzhimenwaixiaojie, Dongcheng District, Beijing******, P. R. China

Bid opening place:Meeting room of Floor 4 CNOOC Tower, No. 6 Dongzhimenwaixiaojie, Dongcheng District, Beijing******, P. R. China

Any bid beyond the required time and date shall be subject for rejection.

6.This Invitation for Bids will be published on China International Bidding website (http://www.chinabidding.com) and China National Offshore Oil Corporation Procurement Platform (https://buy.cnooc.com.cn) at the same time.

7.Before bidding, the bidder shouldcomplete registration and information verification at https://www.ebnew.com Orhttps://www.chinabidding.com .The bid evaluation results will be publicized on these two websites.

8. Contact Information:

Tenderee：CNOOC China Limited

Address:14th Floor, RongchengBuilding, No.6Changbin 3rd Road, (West Coast ) Xiuying District, Haikou, Hainan

Contact Person: Weiran Jing

Tel：+86-898-********

Email：jingwr@cnooc.com.cn

Tendering Agent: CNCCC International Tendering Co., Ltd.

Address: Floor 4 CNOOC Tower, No. 6 Dongzhimenwaixiaojie, Dongcheng District, Beijing******, P. R. China

Contact Person: Chen Sicong

Tel ：+86 10 ********

Email：chensc2@cncccitc.com.cn