6tVARFurnaceofBSMCSpecialMaterialsNewBaseProject(重新招标第1次)

6tVARFurnaceofBSMCSpecialMaterialsNewBaseProject(重新招标第1次)

宝武特冶特种冶金材料新基地(宝山基地)6t真空自耗炉招标公告

发布日期:2023-02-16

招标编号:0721-2340A004-B07-495

招标编号(国际招标网):0721-*******B0795

上海宝华国际招标有限公司(以下称招标机构)受宝钢工程技术集团有限公司(以下称买方)委托,就其宝武特冶特种冶金材料新基地(宝山基地)6t真空自耗炉所需的下列货物进行公开招标,邀请合格投标人进行网上电子投标。

标段编号:0721-2340A004-B07-495/01

标段名称:宝武特冶特种冶金材料新基地(宝山基地)6t真空自耗炉

1.招标货物名称、数量、技术规格和资金来源:

招标货物名称:6t真空自耗炉

数量:2套

技术规格:

主炉体的尺寸:

1).现有行车轨面高度13m;

2).* 炉头提升到最高时,±0.000m以上炉体总高度≦10.5m;地坑深度约-4.5m;

3).电极拉杆的最大行程≥1.7m;

4).最大的炉头提升高度≥1.27m。

炉头旋转:

1).旋转速度 0~3m/min;

2).熔炼站间(90°)的旋转时间约60s。

真空系统:

1).极限真空:(干燥、清洁、空的、无电极)不大于0.05Pa;从大气抽至0.2Pa的时间(干燥、清洁、空的、无电极)不大于15分钟;

2).工作漏率:

泄漏率:(干燥、清洁、空的、无电极)不大于0.05Pa/min;

注:低于0.01Pa 的真空压力可以在HMI上显示。

3).机械泵应包含底部接油盘。大、小罗茨泵采用水平布局。

其他要求详见招标文件技术部分。

资金来源:现汇项目

2. 交货地点和交货时间:

交货地点:上海宝山区水产路项目现场或招标人指定地点

交货时间:合同生效后11个月内设备FOB第1套真空自耗炉交货,12个月内设备FOB最后1套真空自耗炉交货。

3.*凡确认投标的投标人请登录中国国际招标网平台(http://www.chinabidding.com),务必在开标前注册为其会员并通过年检以获得投标资格,中标情况将在中国国际招标网公示。

宝华智慧招标共享平台(https://www.baohuabidding.com)和中国招标投标公共服务平台(http://bulletin.cebpubservice.com/)可同时提供我公司的招标项目信息(邀请招标除外),有兴趣的投标人可以登录查看。登录后,投标人可在宝华智慧招标共享平台在线购买招标文件,进行投标和开标活动。

4. 购买招标文件时间:2023年02月17日起到2023年02月24日止。

5. 招标平台使用费:招标文件英文版及中文版一套(电子版),若中文和英文版有冲突以中文版为准。

2,000.00元人民币或330.00美元整。

招标文件均按标段进行计价出售,投标人成功购标后,自行下载招标文件和投标文件模板。招标文件一经售出不得退还。

6. 投标截止时间和开标时间:2023年03月10日09时00分(北京时间)。投标人应于投标截止时间前在宝华智慧招标共享平台成功递交所有电子投标文件。

7. 开标方式:一步法。

8. 开标地点:宝华智慧招标共享平台电子开标大厅。

9. *对投标人的资格要求:

(1)未被国家企业信用信息公示系统(www.gsxt.gov.cn)列入严重违法失信企业名单。

(2)未被“信用中国”网站(www.creditchina.gov.cn)列入失信被执行人名单。

(3)投标人或设备制造商具有至少2台(套)不小于6t真空自耗炉成套设备的供货业绩,并能提供GH4169(IN718)或GH4169D(IN718Plus)或GH4720Li(Udimet720Li)等高品质高温合金稳定、批量化生产的有效用户证明文件。

(4)本项目不接受代理商投标(投标人同一集团内贸易公司除外)。

(5)由于项目复杂,技术要求高,任何投标人希望参与本项目均应在开标前与招标人联系开展技术交流并签署技术协议;未能签订技术协议的投标人,其投标将被否决;技术协议签字必须在宝钢工程(联系人:庄华 电话:021-******** 邮箱:zhuanghua@baosteel.com)组织下完成。

(6)本项目最高限价为FOB381.6万美元(不含税), 其他币种以开标当日中国银行总行首次发布的外币对人民币的现汇卖出价进行折算。

10. 本项目接受联合体投标。

11.招标人相关信息:

招标人联系人:Zhuang Hua

招标人邮箱:zhuanghua@baosteel.com

招标人电话:134*****537

12. 未领购招标文件的不得参加投标。

13. 客服热线:********** (有关投标人CA办理事项的咨询)

传真:021-********

网上购标方法:具体操作方法详见宝华招标网“操作指南”。

项目经理:胡冬艳(有关招标项目商务、技术问题可致电项目经理。)

电话:021-********

电子邮件:hudongyan@baosteel.com

业务咨询:021-********(业务咨询电话3)

招标机构地址:上海市宝山区克山路550弄8号楼

购标时人民币付款采用第三方支付,外币付款可以汇款到相应外币账户内

开户银行(外币):建行宝钢宝山支行

收 款人:上海宝华国际招标有限公司

账号:

美元:310*****000*********

SwiftCode:PCBCCNBJSHX


6t VAR Furnace of BSMC Special Materials New Base Project (Baoshan Base)

IssueDate:2023-02-16

TenderingNo:0721-2340A004-B07-495

Tendering No. (China International Bidding Website):0721-*******B0795

Shanghai Baohua International Tendering Co., Ltd.(Hereinafterreferred to as Tendering Agency) is commissioned by Baosteel Engineering & Technology Group Co., Ltd.(Hereinafterreferred to as tenderer) on Open Tendering for the following goodsrequired in 6t VAR Furnace of BSMC Special Materials New Base Project of Baosteel Engineering & Technology Group Co., Ltd. (Baoshan Base)inviteseligible bidders to online e-bidding.

Bid sectionNo:0721-2340A004-B07-495/01

Bid sectionName:6t VAR Furnace of BSMC Special Materials New Base Project of Baosteel Engineering & Technology Group Co., Ltd. (Baoshan Base)

1. The name,quantity, technical specifications and fund sources of goods fortendering:

Thename:6t VAR Furnace

Quantity:two sets

Technicalspecifications:

Dimension of main furnace body:

1).Height of the existing rail top 13m.

2).* Total furnace body height ≤ 10.5m at maximum lift height of furnace end, ±0,000m and above; pit depth of approx. -4.5m.

3).Maximum travel of electrode ram: ≥ 1.7m.

4).Maximum lift height of furnace end: ≥ 1.27m.

Furnace end rotation:

1). rotation speed: 0~3m/min.

2). rotation time between melt stations (90°): about 60s.

Vacuum system:

1). Ultimate vacuum: (dry, clean, empty, electrode-free) 0.05 Pa and below; duration for pumping from atmosphere to 0.2 Pa (dry, clean, empty, electrode-free) 15 minutes and shorter.

2). Leak rate of work:

Leak rate:(dry, clean, empty, electrode-free) 0.05Pa/min and below.

Note: Vacuum pressure below 0.01 Pa can be displayed on the HMI.

3). The mechanical pump shall include the bottom oil pan. Large and small Roots pumps are laid out horizontally.

Please refer to technical part for other detailed requirements.

Fundsources of goods:Cash items

2.Deliverytime and place:

Deliverytime:the first VAR furnace package to be delivered FOB within 11 months after the contract comes into force, and the final VAR furnace package to be delivered FOB within 12 months.

Deliveryplace:Project site, Shuichan Road, Baoshan, Shanghai, or the place designated by the bidder

3. *Thebidders who have confirmed to participate the bid must log on ChinaInternational Bidding Website (http://www.chinabidding.com), and register.Please make sure you have registered and passed through the annualreview before bidding. The awarding will be publicized on ChinaInternational Bidding Website.

BaohuaE-bidding website (http://www.baohuabidding.com) and ChinaTendeing & Bidding Public Service Platform(http://bulletin.cebpubservice.com) could also provide theinformation about tendering project of our company (exceptinvitation of tendering), interested bidders may login to viewrelevant information. After login, the bidder could purchasetendering document and bid online.

4. Time forpurchasing Tendering documents: Starting from:2023-02-17 to 2023-02-24(Beijing time).

5. Salesprices of the tendering document: One complete set of TenderingDocuments both in English and Chinese ( electronic versionincluded). The Chinese language shall govern in case of anydiscrepancy between Chinese language and the English language.Salesprice is 2,000.00CNYor330.00USD

Alltendering documents will be sold per bid package (or section).After purchasing the bid, the bidder can download the tenderingdocument and the template of bidding document. The tenderingdocuments sales are non-refundable.

6.Deadlinefor bid submission and Bid Opening Time:2023-03-10 09:00(Beijingtime). The bidder shall submit all bidding documents on Baohuatendering website before the bidding deadline.

7. Bidopening method :One-step of opening。

8. E-bidopening place:Bid opening hall on Baohua Intelligent Bidding Integrated Platform。

9. *Requirementsof Bidder’s qualification:

(1) Not been listed in the list of seriously illegal and dishonest enterprises by the National Enterprise Credit Information Publicity System (www.gsxt.gov.cn).

(2) Not been included in the list of persons subject to enforcement for trust-breaking on the website of "Credit China" (www.creditchina.gov.cn).

(3) The bidder or the equipment manufacturer shall have the performance of supplying two and more packages of 6t VAR Furnace assembly, and shall provide valid user documentation proving the stable batch production of high-quality high-temperature alloys such as GH4169 (IN718) or GH4169D (IN718Plus) or GH4720Li (Udimet720Li).

(4) Bids from agents are unacceptable (except for the trading companies within the same group as the bidder).

(5) Due to the complexity and high technical requirements of the project, any bidder wishing to participate in this project shall contact the tenderee for technical communication and conclude the technical agreement with the tenderee before the bid opening. Bids from bidders who fail to conclude the technical agreement will be rejected. The signing of the technical agreement shall be completed under the organization of Baosteel (contact: Zhuang Hua, Tel: 021-********, email: zhuanghua@baosteel.com).

(6) The maximum price for this project FOB US$3,816,000 (Excluding taxes). Other currencies will be converted at the spot selling price of foreign currencies to RMB first issued by the head office of Bank of China on the day of bid opening.

10. Thisproject consortium bidding is accepted

11.Information about the tenderer:

Tenderer contact:Zhuang Hua

Tenderer"s mailbox:zhuanghua@baosteel.com

Tenderer telephone:134*****537

12. Tel:********** (consultingfor bidders CA affairs)

Fax:021-********

Onlinetendering document purchase: please refer to "HELP" for details onBaohua tendering website.

Bidmanager: (contactproject leader for commercial, technical problems of tenderingproject)

Tel:021-********

E-mail:hudongyan@baosteel.com

Bussiness Consulting Tel:

Bidagency address:No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China

When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.

Bankaccount:China Construction Bank, Baoshan Baosteel Branch

Beneficiary:Shanghai Baohua International Tendering Co., Ltd.

AccountNumber

USD:310*****000*********

SwiftCode:PCBCCNBJSHX

,宝山区,上海市,上海

标签: RF

0人觉得有用

招标
业主

-

关注我们可获得更多采购需求

关注
相关推荐
 
查看详情 免费咨询

最近搜索

热门搜索