10t真空自耗炉招标公告

发布日期：2023-07-18

招标编号：0721-2340A028-B26-556

招标编号（国际招标网）：0721-*******B2656

上海宝华国际招标有限公司（以下称招标机构）受欧冶工业品股份有限公司（以下称买方）委托，就其10t真空自耗炉所需的下列货物进行公开招标，邀请合格投标人进行网上电子投标。

标段编号：0721-2340A028-B26-556/01

标段名称：10t真空自耗炉

1．招标货物名称、数量、技术规格和资金来源：

招标货物名称：10t真空自耗炉

数量：1套

技术规格：

（1）主炉体的尺寸：现有行车轨面高度13m；炉头提升到最高时，±0.000m以上炉体总高度≦10.5m;地坑深度约-4.5m；电极拉杆的最大行程≥1.7m；最大的炉头提升高度≥1.27m。

（2）电极驱动速度：进料速度（交流电机）快速约760~1500mm/min，慢速约150~500mm/min；冶炼速度（伺服电机）0 ~100mm/min。

（3）真空系统：①极限真空（干燥、清洁、空的、无电极）不大于0.067Pa、从大气抽至0.2Pa的时间（干燥、清洁、空的、无电极）不大于20分钟；②泄漏率（干燥、清洁、空的、无电极）不大于0.05Pa/min；

（4）具备熔速、熔滴、电流和电压以及料杆进给自动控制功能，同时具备弧长自动测量功能，熔炼过程的关键工艺参数可实现全自动控制，且工艺参数能实时监控并记录。

（5）具备充氦冷却控制功能（流量控制及压力控制）和惰性气体（氩气）自动分压精确控制功能。

其它技术要求详见招标文件。

资金来源：现汇项目

2. 交货地点和交货时间：

交货地点：关境内投标人：上海市宝山区水产路宝武特冶项目现场；关境外投标人：CIF上海港

交货时间：关境内投标人：合同签订后10个月内(DDP)；关境外投标人：合同签订后9个月内（FOB）

3.*凡确认投标的投标人请登录中国国际招标网平台（http://www.chinabidding.com），务必在开标前注册为其会员并通过年检以获得投标资格，中标情况将在中国国际招标网公示。

宝华智慧招标共享平台(https://www.baohuabidding.com)和中国招标投标公共服务平台(http://bulletin.cebpubservice.com/)可提供我公司的招标项目信息（邀请招标除外），有兴趣的投标人可以登录查看。登录后，投标人可在宝华智慧招标共享平台上购买招标文件进行投标和开标活动。

4. 购买招标文件时间：2023年07月19日起到2023年07月28日止。

5. 招标平台使用费：招标文件英文版及中文版一套（电子版），若中文和英文版有冲突以中文版为准。

1,500.00元人民币或250.00美元整。

招标文件均按标段进行计价出售，投标人成功购标后，自行下载招标文件和投标文件模板。招标文件一经售出不得退还。

6. 投标截止时间和开标时间：2023年08月09日09时00分（北京时间）。投标人应于投标截止时间前在宝华智慧招标共享平台成功递交所有电子投标文件。

7. 开标方式：一步法。

8. 开标地点：宝华智慧招标共享平台电子开标大厅。

9. *对投标人的资格要求：

（1）未被国家企业信用信息公示系统(www.gsxt.gov.cn)列入严重违法失信企业名单；

（2）未被“信用中国”网站(www.creditchina.gov.cn)列入失信被执行人名单；

（3）投标人必须为制造商，不接受代理商投标。

（4）投标人具有不小于6t真空自耗炉成套设备的供货业绩，且该业绩设备已用于GH4169（IN718）或GH4169D（IN718Plus）或GH4720Li（Udimet720Li）等高温合金的生产。

10. 本项目不接受联合体投标。

11.招标人相关信息：

招标人联系人：Quanmin Ren

招标人邮箱：renquanmin@baosteel.com

招标人电话：136*****121

12. 未领购招标文件的不得参加投标。

13. 客服热线：********** （有关投标人CA办理事项的咨询）

传真：021-********

网上购标方法：具体操作方法详见宝华招标网“操作指南”。

项目经理：章仁团 （有关招标项目商务、技术问题可致电项目经理。）

电话：021-********

电子邮件：zhangrentuan@baosteel.com

业务咨询：021-********（业务咨询电话1）

招标机构地址：上海市宝山区克山路550弄8号楼

购标时人民币付款采用第三方支付，外币付款可以汇款到相应外币账户内

开户银行（外币）：建行宝钢宝山支行

收 款 人：上海宝华国际招标有限公司

账 号：

美元：310*****000*********

Swift Code： PCBCCNBJSHX

10t Vacuum Arc Remelting Furnace<="" p="">

Issue Date：2023-07-18

Tendering No：0721-2340A028-B26-556

Tendering No. (China International Bidding Website):0721-*******B2656

Shanghai Baohua International Tendering Co., Ltd.(Hereinafter referred to as Tendering Agency) is commissioned by Baowu Special Metallurgy Co., Ltd.(Hereinafter referred to as tenderer) on Open Tendering for the following goods required in 10t Vacuum Arc Remelting Furnace of Baowu Special Metallurgy Co., Ltd. invites eligible bidders to online e-bidding.

Bid section No：0721-2340A028-B26-556/01

Bid section Name：10t Vacuum Arc Remelting Furnace of Baowu Special Metallurgy Co., Ltd.

1． The name, quantity, technical specifications and fund sources of goods for tendering：

The name：10t Vacuum Arc Remelting Furnace

Quantity：1 set

Technical specifications：

（1）The size of the main furnace body：The height of the existing running rail surface is 13m；When the furnace head is raised to the highest, the total height of the furnace body above ±0.000m is ≦10.5m; The depth of the pit is about -4.5m；Maximum stroke of electrode rod ≥1.7m；Maximum furnace head lifting height ≥1.27m.

（2）Electrode driving speed：Feed speed (AC motor) fast about 760-1500mm/min, slow about 150-500mm/min；Smelting speed (servo motor) 0 -100mm/min.

（3）Vacuum system：①Limit vacuum(dry, clean, empty, electrodeless) no more than 0.067Pa，The time from the atmosphere to 0.2Pa (dry, clean, empty, electrodeless) is not more than 15 minutes; ②Leakage rate: (dry, clean, empty, electrodeless) no more than 0.05Pa/min.

（4） With automatic control function of melting rate, melting drop, current, voltage and rod feeding; automatic measurement function on arc length. The key process parameters of melting process can be fully automatic controlled. Process parameters can be monitored and recorded in real time.

（5） Helium-filled cooling control function (flow control and pressure control) and precise control function on inert gas (argon) automatic distributed pressure.

Please refer to the bidding documents for other technical requirements.

Fund sources of goods：Cash items

2. Delivery time and place：

Delivery time：Bidders within PRC Customs Territory: within 10 months after signing the contract(DDP)；Bidders outside PRC Customs Territory:within 9 months after signing the contract(FOB)

Delivery place：Bidders within PRC Customs Territory: Shanghai The project site of Baowu Special Metallurgy Co., Ltd.in Baoshan District Shuichan Road； Bidders outside PRC Customs Territory:CIF Shanghai Port

3. *The bidders who have confirmed to participate the bid must log on China International Bidding Website (http://www.chinabidding.com), and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website.

Baohua E-bidding website (http://www.baohuabidding.com) and China Tendeing & Bidding Public Service Platform (http://bulletin.cebpubservice.com) could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online.

4. Time for purchasing Tendering documents: Starting from：2023-07-19 to 2023-07-28 (Beijing time).

5. Sales prices of the tendering document: One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.Sales price is 1,500.00CNYor250.00USD

All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable.

6. Deadline for bid submission and Bid Opening Time：2023-08-09 09:00(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline.

7. Bid opening method ：One-step of opening。

8. E-bid opening place：Bid opening hall on Baohua Intelligent Bidding Integrated Platform。

9. *Requirements of Bidder’s qualification：

（1）Not included in the list of seriously illegal and dishonest enterprises by the National Enterprise Credit Information Publicity System (www.gsxt.gov.cn) ；

（2）Not included in the list of persons subject to enforcement for breach of trust on the website of Credit China (www.creditchina.gov.cn)；

（3）The Tenderer must be the manufacturer，The bids from agents is not accepted.

（4）The Tenderer has a performance record of supplying not less than 6t vacuum consumable electrode vaccum furnace in complete sets, and the equipment has been used in the production of high temperature alloys such as GH4169 (IN718) or GH4169D (IN718Plus) or GH4720Li (Udimet720Li) and so on.

10. This project consortium bidding is not accepted

11.Information about the tenderer：

Tenderer contact：Quanmin Ren

Tenderer"s mailbox：renquanmin@baosteel.com

Tenderer telephone：136*****121

12. Tel：********** (consulting for bidders CA affairs)

Fax：021-********

Online tendering document purchase: please refer to "HELP" for details on Baohua tendering website.

Bid manager：Rentuan Zhang (contact project leader for commercial, technical problems of tendering project)

Tel：021-********

E-mail：zhangrentuan@baosteel.com

Bussiness Consulting Tel：021-********（Bussiness Consulting Tel 1）

Bid agency address：No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China

When purchasing the tendering document, the payment in RMB shall be made by the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.

Bank account：China Construction Bank, Baoshan Baosteel Branch

Beneficiary：Shanghai Baohua International Tendering Co., Ltd.

Account Number

USD：310*****000*********

Swift Code： PCBCCNBJSHX