一条试验用20kg/次微型制丝线项目国际招标公告（重招）
一条试验用20kg/次微型制丝线项目国际招标公告（重招）
采购一条试验用20kg/次微型制丝线项目国际招标公告（重招）
中技国际招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标，于2016-06-23在中国国际招标网公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。
1、招标条件
项目概况：根据招标人的需求以定制的方式，设计、制造、运输和安装、调试、交付此条试验用20kg/次微型制丝线。
资金到位或资金来源落实情况：已落实
项目已具备招标条件的说明：已具备招标条件
2、招标内容：
招标项目编号：****-********1241
招标项目名称：采购一条试验用20kg/次微型制丝线项目
项目实施地点：中国云南省
招标产品列表(主要设备)：
序号 | 货物名称 | 数量 | 简要技术规格 |
1 | 试验用20kg/次微型制丝线 | 1套 | 1. 根据招标人的需求以定制的方式，设计、制造、运输和安装、调试、交付此条试验用20kg/次微型制丝线； 2. 该试验线采用模块化设计，主要包括润叶加料模块、烘丝模块、切丝模块、加香模块、掺配模块、储丝模块和整套设备的集成及自动控制系统等，该套设备具备高度集成化、自动化和灵活性的优点； 2.1润叶加料模块： 处理能力：最小10Kg/批，最大25kg/批；二元流体喷射加料(蒸汽和糖料)，二元流体喷射加水(蒸汽和水)；滚筒旋转倾角：-5度～+90度可设定, 电控调整。 2.2烘丝模块： 筒壁预热温度：常温～150摄氏度，工作温度：常温～150摄氏度；螺旋增温增湿机增温范围：烟丝温度增加至65～90摄氏度以内，增湿范围：烟丝增加2～3%的含水率；滚筒旋转倾角：-5度～+90度可调，电控调整。 2.3加香模块： 滚筒旋转倾角：-5度～+90度可调，电控调整；加香计量精度：目标值±1g；工艺时间：2～8分钟任意设定；自动清洁：热水清洗，热风干燥；香精喷嘴角度可调整、雾化状态可调整。 2.4 切丝模块 处理能力：100kg/h；切丝宽度配0.7mm,0.8mm, 0.9mm,1.0mm，1.1mm1.2mm 6个规格，允差±0.1mm，料头料尾合计小于1kg。 2.5 掺配模块 掺配容积率60%，料斗掺配称量程5kg，精度±5g；最小掺配重量：1kg。 2.6储丝模块 30个恒温恒湿存储位，料架设独立电动密封门，烟箱出入库时间:3min以内，进出料称重台称重精度：100kg±50g。 3. 全部设备占地面积不超过98平方米（见图纸），含设备摆放区域、维修通道、物料流转区、设备安全隔离区和集控室。 |
注：1）投标人须对上述所有设备进行完整投标，否则其投标将被否决。
2）潜在投标人可在招标机构得到进一步的信息和查阅招标文件。
3、投标人资格要求
投标人应具备的资格或业绩：
3.1投标人必须依法设立的法人或其他组织，国内投标人须提供营业执照副本、税务登记证副本、组织机构代码证副本或三证合一的营业执照副本复印件（加盖投标人鲜章），国外投标人须提供营业执照复印件或所在国政府签发的同等有效文件复印件（经负责人签字）；
3.2投标人为代理商的，应提供集成制造商关于所投货物的正式授权书原件（国内集成制造商由法定代表人签字加盖单位公章，并提供国内集成制造商的营业执照副本、企业税务登记证副本、组织机构代码证副本或三证合一的营业执照副本复印件，国外集成制造商经负责人签字，并提供营业执照复印件或所在国政府签发的同等有效文件复印件）；
3.3集成制造商须具有ISO9000族质量体系认证证书，且在有效期内；
3.4集成制造商须在中国境内设有办事机构，而且在中国境内拥有专业的技术团队来负责整套微型制丝线的设计、安装、调试和售后服务等工作；
3.5投标人或集成制造商近5年内（2011年至2015年）在全球范围内具有类似设备的销售业绩，提供合同复印件（国内加盖鲜章，国外经负责人签字），列明设备名称、主要规格型号、签约年份、用户名称和联系方式；
3.6投标人开户银行在开标日前三个月内开具的资信证明原件或复印件。
集成制造商是指具有设计、制造、电控集成、运输和安装、调试、交付整套微型制丝线的能力的系统设备的集成商。
是否接受联合体投标：不接受
未领购招标文件是否可以参加投标：不可以
4、招标文件的获取
招标文件领购开始时间：2016-06-23
招标文件领购结束时间：2016-06-30
获取招标文件方式：现场领购
招标文件领购地点：中国云南省昆明市护国路69号护国大厦7楼AC座
招标文件售价：￥1200/$185
5、投标文件的递交
投标截止时间（开标时间）：2016-07-14 10:00
投标文件送达地点：中技国际招标有限公司开标厅【昆明市人民中路39号银顺广场（傲城）A-8-111室】（不接受邮寄方式递交）
开标地点：同投标文件送达地点
6、投标人在投标前需在中国国际招标网上完成注册。评标结果将在中国国际招标网公示。
7、联系方式
招标人：红云红河烟草（集团）有限责任公司
地址：云南省昆明市五华区红锦路367号
联系人：齐良春
联系方式：+86-***-********
招标代理机构：中技国际招标有限公司
地址：中国云南省昆明市护国路69号护国大厦7楼AC座
联系人：朱文艳、沈晓、朱渊
联系方式：+86-***-********
8、汇款方式
招标代理机构开户银行(人民币): 中国银行总行营业部
招标代理机构开户银行(美元): 中国银行总行营业部
账号(人民币): ********0653
账号(美元): ********0281
其他: 开户名称：中技国际招标有限公司 SWIFT： BKCHCNBJ
9、其他补充说明
其他补充说明: 本项目公告在《中国国际招标网》、《》、《红云红河集团网》、《云南省招标投标信息网》发布
Procurement of 20kg per time one minitobacco shred cutter production line for experiment
Procurement of 20kg per time one minitobacco shred cutter production line for experiment
China International Tendering Co.,Ltd.entrusted by the purchaser, invites sealed bids from eligible suppliers homeand abroad for the supply of the following goods and/or service by way ofInternational Competitive Bidding. The tender notice was released onwww.chinabidding.com on 2016-06-23.
1.Bidding Conditions
Overview：the design,manufacturing, transportation and installation, commissioning and delivery ofpilot 20kg/ batch micro tobacco primary line for experiment to meet thecustomized requirements of the Tenderee.
Source of Funds：fund is inplace and available
Description of The Prepared Bidding Conditions：Conditionshave been met
2.Bidding Content：
Bidding No：****-********1241
Project Name：Procurement of 20kgper time one mini tobacco shred cutter production line for experiment
Place of Implementation：Kunming,Yunnan
List of Products：
NO. | Product Name | Quantity | Main Technical Data |
1 | pilot 20kg/ batch micro tobacco primary line | a complete | 1. According to the needs and requirements of the Tenderee, the bidder should design, manufacture and deliver, installation and commissioning a complete pilot 20kg/ batch micro tobacco primary line; 2. The micro primary line should be designed in modular, it mainly including a direct conditioning casing cylinder module, a Dryer module, a Rotary cutting module, a Flavoring cylinder module, a Blending silo module, an automatic storage module and incorporated automatic control system etc., This set of equipment should be highly integrated, and also have the advantages of highly automatic and flexibility; 2.1 Direct conditioning casing cylinder module Processing capacity: minimum 10kg / batch, maximum 25 kg / batch; Casing means: Two substance spray nozzle (steam and casing), Conditioning means: Two substance spray nozzle (steam and water); the cylinder turnover angle: from -5 degrees to + 90 degrees, and can be set by electronic system. 2.2 Dryer Module: Cylinder preheating temperature: from room temperature to 150 Degrees Celsius, Cylinder working temperature range: from room temperature to 150 Degrees Celsius; Infeed paddle screw ad-moister: temperature increasing range: cut lamina’s temperature can be increased to 65-90 Degrees Celsius, Humidity increasing range: the cut lamina’s humidity can be increased 2 to 3%; the cylinder turnover angle: from -5 degrees to + 90 degrees, and can be set by electronic system. 2.3 Flavoring Modular The cylinder turnover angle: from -5 degrees to + 90 degrees, and can be set by electronic system; Flavor metering precision: the target value ±1g. Flavoring process time: 2-8 minutes and adjustable; CIP system: cleaning by hot water and drying by hot air; the angle of flavor spray nozzle and the atomizing can be adjustable. 2.4 Rotary cutting module Processing capacity: 100 kg / h; the cutting width can be set to 6 specifications such as 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm 1.2mm, and within tolerable deviation of ±0.1mm, the total waste of cutting lamina should less than 1kg in cutting . 2.5 Blending silo Modular The internal volume rate of blending silo: 60%, The hopper scale: metering range: 5kg with precision: ±5g; the minimum blending weight: 1kg. 2.6 Automatic storage module The automatic storage module should have 30 sets of temperature and humidity constant controlled bin storage positions. Each bin storage position has incorporated an electric door that can be operated inbridually. The loading and unloading cycle time for storage bins: less than 3 minutes, Loading and weighing platform weighing precision: 100kg ± 50g. 3.The complete micro primary line should be placed in into an area that no more than 98 square meters (shown in the building drawing in attachment), where the area should contains all the equipment that need to be placed, the maintenance walkways, the material transporting area, and with safety isolation zone, and the central control room . |
Notice: 1）The Bidder shouldbid for all the above-mentioned equipments, otherwise the bid shall be denied.
2）Potential Biddersmay obtain further information from and inspect the bidding documents at theoffice of the Tendering Agent.
3.Qualification Requirements For Bidder
Qualifications or Performance：
3.1The bidder should be a legal person orother organization established in accordance with the law. Business licenseduplicate, tax registration certificate duplicate, organization codecertificate duplicate or business license duplicate integrating theabove-mentioned three certificates shall be provided by domestic Bidders in theform of copy with the bidder’s official seal. Business license duplicate or anequally valid document issued by the government shall be provided by foreignBidders in the form of copy with the signature of the Director.
3.2In case that the Bidder is the agent ofthe bid product, the bidder shall provide original formal authorization for theequipment issued by the integrated manufacturer (in case that the integratedmanufacturer is domestic manufacturer, the formal authorization shall beprovided with the signature of the legal representative and official seal ofthe manufacturer. Business license duplicate, tax registration certificateduplicate, organization code certificate duplicate or business licenseduplicate integrating the above-mentioned three certificates shall be providedby domestic Bidders in the form of copy with the bidder’s official seal.Business license duplicate or an equally valid document issued by thegovernment shall be provided by foreign Bidders in the form of copy with thesignature of the Director.)
3.3A Integrated manufacturers shall haveISO9000 quality system certification within its period of validity.
3.4A Integrated manufacturers shall haveits operation establishment in china and a professional technical team with theresponsibility for the design, installation, commissioning and after-salesservice and etc. for the complete pilot 20kg/ batch micro tobacco primary line.
3.5The Bidder or integrated manufacturershall have the world-wide sales records for the similar equipment in in recentfive years (from 2011 to 2015). Copy of the contract (for domestic Bidders, thecontract should be sealed; for foreign Bidders, the contract should be signedby the Director ). Name of equipment, main specification and type of equipment,signing year, end user’s name and contact information shall be provided.
3.6The original or copy of the creditcertification issued by the Bidder’s bank of deposit within three (3) monthsahead of the time of bid opening shall be provided.
Integrated manufacturer means an integratorwith the capability of design, manufacturing, integrated electronic control,transportation and installation, commissioning and delivery for the completemicro tobacco primary line.
Joint Bids：NOT Available
Bid without the bidding documents：NOTAvailable
4.Acquisition of Bidding Documents
Beginning of Selling Bidding Documents：2016-06-23
Ending of Selling Bidding Documents：2016-06-30
To Obtain：On-site Purchase
Place：7th floor, Flat AC,Huguo Plaza, No.69 Huguo Road, Kunming,Yunnan, P.R.China
Price of Bidding Documents: ￥1200/$185
Additional Instructions：
5.Bid Submission
Deadline for Submitting Bids/Time of BidOpening (Beijing Time)：2016-07-14 10:00
Place of Bid：The bid opening roomof China International Tendering Company Ltd. (Room A-8-111 Yinshunsquare,No.39 Renmin zhong lu,Kunming. Mail delivery will not be accepted.
Place of Bid Opening：the samewith the Place of Bid
6.The bidder needs to register before thetender on www.chinabidding.com. And the evaluation results will be released on
www.chinabidding.com.
7.Contact Details
Purchasers：Hongyunhonghe Group
Add.：No.367 HongjinRoad,Wuhua District, Kunming, Yunnan
Contact：Qi Liangchun
Tel：+86-***-********
Bidding Agency：ChinaInternational Tendering Co.,Ltd.
Add.：7th floor, Flat AC,Huguo Plaza, No.69 Huguo Road, Kunming,Yunnan, P.R.China
Contact：
Tel ：+86-***-********
8.Remittance Approach
Bank(RMB):Bank of China Head Office
Bank(USD):Bank of China Head Office
Account NO.(RMB):********0653
Account NO.(USD):********0281
Additional:Account Name:China InternationalTendering Company Ltd. SWIFT：BKCHCNBJ
9.Additional Instruction
Additional Instruction:The tender noticewas released on www.chinabidding.com , ,www.hyhhgroup.com and www.ynbidding.net
标签:
0人觉得有用|
招标
|
中技国际招标有限公司 关注我们可获得更多采购需求 |
关注 |
最近搜索
无
热门搜索
无
