减速机数字化车间数控滚齿机设备国际竞争性招标项目项目公告
减速机数字化车间数控滚齿机设备国际竞争性招标项目项目公告
宁夏天地奔牛实业集团有限公司高端数字化制 造(宁夏)基地建设减速机数字化车间数控滚 齿机设备国际竞争性招标项目 - 国际招标公告
煤炭工业规划设计研究院有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标,于2024-06-14在中国国际招标网公告。
本次招标采用传统招标方式,现邀请合格投标人参加投标。
1、招标条件项目概况:本项目为宁夏天地奔牛实业集团有限公司高端数字化制造(宁夏)基地建设减速机数字化车间数控滚齿机设备国际竞争性招 标项目,项目已经批准实施,拟通过国际招标方式购置1台设备。
资金到位或资金来源落实情况:企业自筹,已落实 项目已具备招标条件的说明:已具备
2、招标内容: 招标项目编号:4679-244*****4291
招标项目名称:宁夏天地奔牛实业集团有限公司高端数字化制造(宁夏)基地建设减速机数字化车间数控滚齿机设备国际竞争性招标项目
项目实施地点:中国宁夏回族自治区
招标产品列表(主要设备):
序 号 产 品 名 称 数量 简要 技术 规格 备 注
1 数 控 滚 齿 机 最大滚齿模数(mm)≥24,最大滚削直径(mm)≥φ1200,主立柱轴向(Z轴)行程(mm)≥1000,滚刀中心与工作台中心距离(mm):50-850,滚刀最大转速(r/min)≥300,工作台尺寸(mm)≥φ800, 工作台承重(kg)≥8000,加工精度达到IT6级。 1 无
3、投标人资格要求 投标人应具备的资格或业绩:投标人应具备的资格或业绩:除合格投标人要求外,投标人的其他资格要求: (1)投标人应为来自中华 人民共和国或是与中华人民共和国有正常贸易往来的国家或地区的制造商,具备良好的商业信誉和健全的财务状况,拥有完备的国内售后服 务和技术支持体系,具有履行本项目合同所需的资金、技术和管理实施能力(提供相应证明材)。 (2)制造商须具有5年以上同类产品的制 造历史。 (3)制造商须具 有ISO9001质量体系认证或国际有效认证(同等级的认证证明)证书彩色扫描件或复印件并加盖公章(证书应清 晰可辨,持证主体应与投标人名称一致)。 (4)投标人提供近三年无被列入政府、企业不良信誉名单或纳税信用黑名单的信誉承诺书(格式 自拟); (5)未领购招标文件的潜在投标人不得参加投标;
是否接受联合体投标:不接受
未领购招标文件是否可以参加投标:不可以
4、招标文件的获取
招标文件领购开始时间:2024-06-14 招标文件领购结束时间:2024-06-21
是否在线售卖标书:否
获取招标文件方式:电子下载、现场领购
招标文件领购地点:中国煤科电子采购平台自行下载 招标文件售价:¥200/$28
其他说明:请务必公对公汇款,汇款时务必备注“GHY-*****(2)标书费”,在售卖标书截止时间前将标书费汇款凭证上传至中国煤科电子采购平台【操作方法详见平台首页-客服中心-投标指南】,工作人员审核通过后,投标人自行在线下载标书。 5、投标文件的递交
投标截止时间(开标时间):2024-07-09 09:00
投标文件送达地点:中国煤科电子采购平台电子上传
开标地点:中国煤科电子采购平台电子开标大厅
6、联系方式 招标人:宁夏天地奔牛实业集团有限公司 地址:宁夏石嘴山市大武口区金工路1号
联系人:胡艳杰 联系方式 :130*****716
招标代理机构:煤炭工业规划设计研究院有限公司
地址:北京市西城区六铺炕二巷甲6号
联系人:李嘉平
联系方式 :157*****965
7、汇款方式 招标代理机构开户银行(人民币):
招标代理机构开户银行(美元):
账号(人民币): 账号(美元):
8、其他补充说明
其他补充说明: 请务必公对公付款 以上账户用于收取标书费、投标保证金及招标服务费,请投标人在汇款时根据汇款用途务必注明“GHY- *****(2)-标书费”字样、“GHY-*****(2)-投标保证金”字样或“GHY-*****(2)-招标服务费”字样。否则系统将无法认款,导致后续无法申请开具标书费发票等不良后果。
Gear Reducer Digital Workshop Cnc Hobbing Machine Equipment Internation al Competitive Bidding Project
CCTEG COAL INDUSTRY PLANNING INSTITUTE entrusted by the purchaser, invites sealed bids from eligible suppliers home and ab road for the supply of the following goods and/or service by way of International Competitive Bidding.
The tender notice was released on w ww.chinabidding.com on 2024-06-14.
1.Bidding Conditions Overview:
This project is the international competitive bidding project of CNC gear hobbing machine equipment for the construction of digital gear workshop of high-end digital manufacturing (Ningxia) base of Ningxia Tiandi Benniu Industrial Group Co., LTD. The project has been approved for implementation, and it is planned to purchase 1 equipment through international bidding. Source of Funds:the enterprise has self-raised, has been implemented Description of The Prepared Bidding Conditions:already have
2.Bidding Content:
Bidding No:4679-244*****4291
Project Name:Gear Reducer Digital Workshop Cnc Hobbing Machine Equipment International Competitive Bidding Project Place of Implementation:1, Jingong Road, Dawukou District, Shizuishan City, Ningxia List of Products: N O. Produ ct Na me Quantity Main Tech nical Data Re ma rks 1 CNC hobbi ng ma chine Maximum hobbing modulus (mm) ≥24, maximum hobbing diameter (mm) ≥φ1200, axial (Z-axis) stro ke of the main column (mm) ≥1000, distance between the center of the hob and the center of the tab le (mm) :50-850, maximum hob speed (r/min) ≥300, table size (mm) ≥ 800, Worktable bearing (kg) ≥ 8000, machining accuracy to IT6 level. 1 There is no
3.Qualification Requirements For Bidder
Qualifications or Performance:In addition to the requirements of qualified bidders, other qualification requirements of bidders: (1) The bidder shall be a manufacturer from the People"s Republic of China or a country or region with normal trade contacts with the People"s Rep ublic of China, with good business reputation and sound financial status, with a complete domestic after-sales service and technical suppor t system, and with the capital, technology and management implementation ability required for the performance of the project contract (pro vide relevant certification materials). (2) The manufacturer must have a manufacturing history of more than 5 years of similar products. (3)T he manufacturer must have ISO9001 quality system certification or international valid certification (certification of the same level) certificate color scan or copy and stamped with the official seal (certificate should be clearly identifiable, the subject of the certificate should be the sa me as the name of the bidder). (4) The bidder shall provide a letter of credit commitment that has not been included in the government or e nterprise bad credit list or tax credit blacklist in the past three years (in its own format); (5) Any potential bidder who has not obtained the bi dding documents shall not participate in the bidding; Joint Bids:NOT Available Bid without the bidding documents:NOT Available 4.Acquisition of Bidding Documents Beginning of Selling Bidding Documents:2024-06-14 Ending of Selling Bidding Documents:2024-06-21 Sell bidding doc online or not:No To Obtain:On-line Download,On-site Purchase Place:http://cg.ccteg.cn/cms/index.htm
Price of Bidding Documents: ¥200/$28 Additional Instructions:Please be sure to make a business-to-business remittance, and note "GHY-*****(2) bid fee" when making the remittance. Upload the bid fee remittance voucher to the electronic procurement platform of China Coal Science before the deadline for the sale of bid documents [See the platform homepage - Customer Service Center - Bidding Guide for details]. After the staff review, the bi dder will download the bid online by himself.
5.Bid Submission Deadline for Submitting Bids/Time of Bid Opening (Beijing Time):2024-07-09 09:00
Place of Bid:http://cg.ccteg.cn/cms/index.htm Place of Bid Opening:http://cg.ccteg.cn/cms/index.htm 6.Contact Details Purchasers:Ningxia Tiandi Benniu Industrial Group Co., LTD Add.:1, Jingong Road, Dawukou District, Shizuishan City, Ningxia
Contact:Hu Yanjie Tel:130*****716
Bidding Agency:CCTEG COAL INDUSTRY PLANNING INSTITUTE Add.:No. 6, Lane 2, Liupu Kang, Xicheng District, Beijing Contact:Li Jiaping Tel :157*****965 7.Remittance Approach Bank(RMB): Bank(USD): Account NO.(RMB): Account NO.(USD):
8.Additional Instruction Additional Instruction::The above account is used to charge the bid document fee, bid security and bidding service fee. The bidder shall be sure to indicate the words "GHY-*****(2)-Bid document fee", "GHY-*****-(2)Bid security" or "GHY-*****(2)-Bidding service f ee" according to the purpose of the remittance. Otherwise, the system will not be able to recognize the payment, resulting in the subseque nt failure to apply for the issuance of bid document fee invoice and other adverse consequences.
招标
|
煤炭工业规划设计研究院有限公司 关注我们可获得更多采购需求 |
关注 |
最近搜索
无
热门搜索
无