序号

产品名称

数量

简要技术规格

0714-164CECCHOT01/15

边框胶涂布装置、液晶滴下装置、真空贴合装置

12+6+9

设备描述： 边框胶涂布装置(Seal Dispenser Machine) 使用HEAD将Seal胶材,依照指定的Pattern涂怖于基板上面作业，该设备需要高稳定度涂怖HEAD，精准的线宽及位置控制，并要能够符合规范内的生产时序。 液晶滴下装置(LC Dispenser Machine) 该装置的作用是将液晶滴在基板表面。按设定的重量与位置，精准的滴在玻璃基板表面上。真空贴合装置(Vacuum Aligner Machine) 该装置的作用是在真空的条件下将TFT与CF精准的贴合在一起。

0714-164CECCHOT01/16

配向膜预烘烤装置

3

设备描述： 本设备主要用于PI 膜预固化装置,用于将PI环化反应使成为稳定的膜。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选控制系统执行组件精度高，可靠性好，响应速度快。

0714-164CECCHOT01/17

柱高测量装置

2

设备描述： 此设备适用于大型平板显示器生产过程中彩膜产品上PS柱高与线幅的测量。

0714-164CECCHOT01/19

彩膜预烘烤装置

7

设备描述： 本设备主要用于TFT-LCD 彩膜预烘烤。

0714-164CECCHOT01/21

卡匣（线式）

3000

设备描述： 用于ACF&OC工厂收纳/发出Glass基板，可以使用在Changer、Stocker、RGV、PNP、LIFTER、OHCV、CSTClean、MGV还有CST搬送设备等的装置。

0714-164CECCHOT01/22

固化装置-彩膜（二）

7

设备描述： 本设备主要用于薄膜晶体管液晶显示器领域退火炉装置来进行铟锡氧化膜、金属膜、光阻膜的退火。

NO.

ProductName

Quantity

MainTechnical Data

0714-164CECCHOT01/15

Seal Dispenser Machine，LC Dispenser Machine，Vacuum Aligner Machine

12+6+9

Description of Equipment： Seal Dispenser Machine This equipmentcan be what we want the pattern dispensing on the glass. Make TFT and CFstick together, at the same time provide LCD isolation with the outsideworld and auxiliary ODF process. LC Dispenser Machine The role of themachine is to drop the liquid crystal on the substrate surface. Accordingto the set weight and position, precision drops in the glass substrate onthe table. Vacuum Aligner Machine

0714-164CECCHOT01/16

After Coating Pre-Bake

3

Description of Equipment： The system is mainly used for TFT LCD ofPI pre cure oven. The process that PI film cyclization reaction process.This system is required to be reasonable in design, with advancedtechnology to ensure the system an excellent kinetic performance. Theaction elements selected for the control system shall be of high accuracy,good reliability and rapid response. The machine shall be convenient foruse, operation and maintenance, be artistic in configuration, compact instructure, stable in performance and satisfactory in after-sale service.

0714-164CECCHOT01/17

Photo Spacer Height measurementequipment

2

Description of Equipment： The purpose of equipment is to measureCF product PS height and CD on the surface of color filter during producingthe large flat panel display.

0714-164CECCHOT01/19

Color Filter Pre-Back Machine

7

Description of Equipment： This system is mainly used for CFPre-bake For TFT-LCD product.

0714-164CECCHOT01/21

Wire CST

3000

Description of Equipment： The device is used for ACF&OCfactory receiving/sending glass，the device can use in Changer, Stocker, RGV, PNP, LIFTER, OHCV,CST Clean, MGV and CST transfer equipment etc.

0714-164CECCHOT01/22

OVEN equipment-CF(2)

7

Description of Equipment： The system is mainly used for TFT LCD ofAnneal Oven for ITO 、metal 、resistance anneal.