1、招标条件 |
项目概况：咸阳彩虹光电科技有限公司第8.6代薄膜晶体管液晶显示器件（TFT-LCD）项目生产线设备采购 |
资金到位或资金来源落实情况：资金已落实 |
项目已具备招标条件的说明：已具备招标条件 |
2、招标内容： |
招标项目编号：0714-164CECCHOT01/23-29、33 |
招标项目名称：第8.6代薄膜晶体管液晶显示器件（TFT-LCD）项目 |
项目实施地点：中国陕西省 |
招标产品列表(主要设备)： |
序号 | 产品名称 | 数量 | 简要技术规格 | 0714-164CECCHOT01/23 | 自动化物料输运系统专用传送设备-阵列、自动化物料输运系统专用传送设备-彩膜 | 1+1 | 设备描述： 自动化物料输运系统专用传送设备-阵列该系统搬送、保管Array各工程间卡匣。此系统是由Stocker、CRANE、OHCV、MGV、Lifter、PNP等构成。按照CIM或本地控制的指示，自动搬送卡匣。自动化物料输运系统专用传送设备-彩膜该系统搬送、保管CF各工程间卡匣。此系统是由Stocker、CRANE、OHCV、MGV、Lifter、PNP等构成。按照CIM或本地控制的指示，自动搬送卡匣。 | 0714-164CECCHOT01/24 | 手动宏观检查装置 | 1 | 设备描述： 应用于G8.6 (2,250mm(W) × 2,610mm (L) ) 基板目视光学检查的装置，并要能够符合规范内的生产时序。 | 0714-164CECCHOT01/25 | 配向前清洗装置、磨边清洗装置 | 3+4 | 设备描述： 配向前清洗装置： 本设备主要用于TFT LCD配向前清洗装置。 磨边清洗裝置： 本设备主要用于成盒玻璃磨边后洗净设备。 | 0714-164CECCHOT01/26 | 端子研磨装置 | 4 | 设备描述： 使用磨轮对Plane进行倒角和磨边，设备需具有高稳定的研磨精度的控制，并要能够符合规范内的生产时序。 | 0714-164CECCHOT01/27 | 等离子清洗装置 | 6 | 设备描述： 应用于G8.6 (2,250mm(W) × 2,610mm (L) )，本设备主要用于成盒取向膜涂布前清洗机前产品的表面处理。 | 0714-164CECCHOT01/28 | 配向膜固化装置、配向前干燥炉 | 3+3 | 设备描述： 配向膜固化装置 本设备主要用于配向膜固化装置,用于将PI环化反应使成为稳定的膜。配向前干燥炉应用于G8.6 ( 2,250mm(W) × 2,610mm (L) )，通过高温炉将清洗后的基板烘烤祛除表面水分，并要能够符合规范内的生产时序。 | 0714-164CECCHOT01/29 | 自动化物料输运系统专用传送设备-成盒（一）、自动化物料输运系统专用传送设备-成盒（二） | 1+1 | 设备描述： 自动化物料输运系统专用传送设备-(成盒一) 该系统搬送、保管FEOL各工程间卡匣。此系统是由Stocker、CRANE、OHCV、MGV、Lifter、PNP等构成。按照CIM或本地控制的指示，自动搬送卡匣。自动化物料输运系统专用传送设备-(成盒二) 该系统搬送、保管BEOL各工程间卡匣。此系统是由Stocker、CRANE、OHCV、MGV、Lifter、PNP等构成。按照CIM或本地控制的指示，自动搬送卡匣。 | 0714-164CECCHOT01/33 | 固化装置-阵列、固化装置-彩膜（一） | 2+1 | 设备描述： 本设备主要用于薄膜晶体管液晶显示器领域退火炉装置来进行铟锡氧化膜、金属膜、光阻膜的退火。 |
|
3、投标人资格要求 |
投标人应具备的资格或业绩：投标人应是响应招标、已在招标机构处领购招标文件，并参加投标竞争的法人或其他组织。凡是来自中华人民共和国或是与中华人民共和国有正常贸易往来的国家或地区的法人或其他组织均可投标。 |
是否接受联合体投标：不接受 |
未领购招标文件是否可以参加投标：不可以 |
4、招标文件的获取 |
招标文件领购开始时间：2016-12-23 |
招标文件领购结束时间：2016-12-30 |
获取招标文件方式：现场领购 |
招标文件领购地点：中国电子进出口总公司, 北京市海淀区复兴路17号国海广场A座新中电大厦21层 |
招标文件售价：详见招标文件 |
5、投标文件的递交 |
投标截止时间（开标时间）：2017-01-13 10:00 |
投标文件送达地点：中国电子进出口总公司北京市海淀区复兴路17号国海广场A座新中电大厦19层 |
开标地点：中国电子进出口总公司北京市海淀区复兴路17号国海广场A座新中电大厦19层 |
6、联系方式 |
招标代理机构：中国电子进出口总公司 |
地址：北京市海淀区复兴路17号国海广场A座新中电大厦 |
联系人：王璐 |
联系方式：+86-10-******** |
1.Bidding Conditions |
Overview：EquipmentProcurement Project of G8.6 TFT-LCD by Xianyang Caihong OptoelectronicsTechnology Co.,LTD. |
Source of Funds：OK |
Description of The Prepared Bidding Conditions：OK |
2.Bidding Content： |
Bidding No：0714-164CECCHOT01/23-29、33 |
Project Name：EquipmentProcurement Project of G8.6 TFT-LCD |
Place of Implementation：Xianyang, China |
List of Products： |
NO. | ProductName | Quantity | MainTechnical Data | 0714-164CECCHOT01/23 | Automated Material HandlingSystems-Array, Automated Material Handling Systems-CF | 1+1 | Description of Equipment： Automated Material Handling Systems-Array AMHS is used fortransferring and storing the CST among tools in Array project. This systemis consisted of Stocker, CRANE, OHCV, Lifter, and PNP…etc. AutomatedMaterial Handling Systems-CF AMHS is used for transferring and storing theCST among tools in CF project. This system is consisted of Stocker, CRANE,OHCV, Lifter, and PNP…etc. | 0714-164CECCHOT01/24 | Macroscopical inspection devicemanually | 1 | Description of Equipment： Using on G8.6( 2,250mm(W) × 2,610mm (L) ) substrate , It Checkthe device in visual optics manually and should be able to meet the timingspecifications in the production. | 0714-164CECCHOT01/25 | Before PI Cleaner,After Beveling WetCleaner | 3+4 | Description of Equipment： Before PI Cleaner This system is mainly used for TFT LCD ofBefore PI Cleaner System for cleaning substrates. After Beveling WetCleaner The system is mainly used for LCD of Beveling Wet Cleaner. | 0714-164CECCHOT01/26 | Panel Edge Grinding Equipment | 4 | Description of Equipment： Using the grinding wheel to chamfer and edge grinding, deviceswith high stability of the grinding accuracy，andshould be able to meet the timing specifications in the production. | 0714-164CECCHOT01/27 | Plasma Cleaner | 6 | Description of Equipment： Using on G8.6( 2,250mm(W) × 2,610mm (L) ) substrate, The systemis mainly used for Cell Pre-PI Cleaner by AP Plasma. | 0714-164CECCHOT01/28 | PI Post Bake Oven,Before PI CoaterOven | 3+3 | Description of Equipment： PI Post Bake Oven (PIPB) The system is mainly used for TFT LCDof PI pre cure oven. The process that PI film cyclization reaction process.Before PI Coater Oven Using on G8.6( 2,250mm(W) × 2,610mm (L) ) substrate ,Through the high temperature furnace will be cleaning the substrate afterbaking removing surface moisture and should be able to meet the timingspecifications in the production. | 0714-164CECCHOT01/29 | Automated Material HandlingSystems-FEOL, Automated Material Handling Systems-BEOL | 1+1 | Description of Equipment： Automated Material Handling Systems-FEOL AMHS is used fortransferring and storing the CST among tools in FEOL project. This systemis consisted of Stocker, CRANE, OHCV, Lifter, and PNP…etc. In accordancewith the instructions of CIM or local controller，Transferring the CST automatically. Automated Material HandlingSystems-BEOL AMHS is used for transferring and storing the CST among toolsin BEOL project. This system is consisted of Stocker, CRANE, OHCV,MGV，RGV…etc. In accordance with the instructions of CIM or localcontroller，Transferring the CST automatically. | 0714-164CECCHOT01/33 | Oven equipment-array, Ovenequipment-CF(1) | 2+1 | Description of Equipment： The system is mainly used for TFT LCD of Anneal Oven for ITO 、metal 、resistanceanneal. |
|
3.Qualification Requirements For Bidder |
Qualifications or Performance：Bidders are legal persons or other organizations who participatein bidding. This Invitation for Bids is open to all suppliers from within thePeoples Republic of China (hereinafter abb. as "PRC") and allcountries/areas which have regular trade relations with PRC. Bidders must payfor the bidding documents and register for the record, otherwise the bidderhas no qualification to attend the bid. |
Joint Bids：NOT Available |
Bid without the bidding documents：NOT Available |
4.Acquisition of Bidding Documents |
Beginning of Selling Bidding Documents：2016-12-23 |
Ending of Selling Bidding Documents：2016-12-30 |
To Obtain：On-site Purchase |
Place：Level 21, NewCEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Price of Bidding Documents: Please see BiddingDocuments |
5.Bid Submission |
Deadline for Submitting Bids/Time of Bid Opening(Beijing Time)：2017-01-13 10:00 |
Place of Bid：CEIEC, Level 19,New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R.China |
Place of Bid Opening：CEIEC, Level 19, New CEIEC Building, No. 17 Fuxing Road, HaidianDistrict, Beijing, P. R. China |
6.Contact Details |
Bidding Agency：CEIEC |
Add.：New CEIECBuilding, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China |
Contact：Wang Lu |
Tel ：+86-10-******** |
