Bidding announcements

ITB No.: ITC-PB-BGC-PC-2025-0002
Project Name: Tendering for Pipeline Bulk Material (EPC of BGC 48"" Gas Pipeline Project in West Qurna 1 Oilfield)
1. Tendering Conditions
The project has implemented relevant procedures according to rules, regulations, and laws .as well as the capital has been confirmed. Now we hereby invite your esteemed company to participate in this bid.
2. Project Overview and Tendering Scope
2.1. Project overview:
Project Name:EPC of BGC 48"" Gas Pipeline Project in West Qurna 1 Oilfield
Owner: Basra Gas Company (BGC)
48-inch buried pipeline (WT = 14.27 8mm\15.88mm, API 5L Gr. X42 PSL 2 Sour) accompanied by two 96-core optical cables, with a length of 53 kilometers, a design pressure of 17 barg, crossing the railway and the Basra Canal respectively, as well as asphalt roads and existing facility pipelines. It is expected that there will be 9 locations for pipe jacking crossings.
28-inch CS-8 to Tie-in buried pipeline branch line (API 5L Gr. X52 PSL 2 Sour, 8.74mm\9.53mm, design pressure 17 barg) accompanied by two 24-core optical cables, approximately 1.95 kilometers long.
28-inch CS-7 to Tie-in buried pipeline branch line (API 5L Gr. X52 PSL 2 Sour, 8.74mm\9.53mm, design pressure 17 barg) accompanied by two 24-core optical cables, approximately 2.30 kilometers long.
Three hot tapping operations for the 40-inch to 28-inch size change.
Two valve chambers and two 28-inch permanent pigging launchers and receivers.
One horizontal directional drilling (HDD) with a length of approximately 1,214.2 meters (width of the MOD is 924 meters).
Internal modification of the existing solid-liquid separator in the NR NGL station and tie-in work during the shutdown period.
Remote Terminal Unit (RTU) system, solar power system for valve chambers, and leakage detection system.
2.2. Scope: For the materials to be procured by the present Tendering, please refer to the table below.

Detailed technical requirements refer to Attachment 1 Technical Documents.
3. Requirements For Bidder
(1) Bidders shall have the status of an independent legal entity, be independent in legal and financial aspects, operate legally and be independent of the purchaser (procurement implementer), and shall be manufacturers specializing in the production and manufacture of this project or traders are fully responsible for the goods and services they provide.
(2) Bidders are required to provide a valid ISO 9001 Quality Management System Certification.
(3) Bidders shall provide the financial report of 2023 (audit report, financial accounting statements, including balance sheet, cash flow statement and income statement), and there shall be no circumstances such as entering the liquidation process, being declared bankrupt or losing the ability to perform contracts. For foreign bidders, if they are unable to provide the financial report, they shall provide a letter of commitment accepting that the tenderee could conduct an audit and evaluation on whether their financial status is qualified prior to the signing of the contract.
(4) Reputation requirements (applicable to bidders in China): Bidders shall not be listed in the list of seriously illegal and untrustworthy enterprises or the list of persons subject to enforcement for dishonesty on the National Enterprise Credit Information Publicity System (http://www.gsxt.gov.cn) and the Credit China website (www.creditchina.gov.cn).
(5) The selected manufacturers of the Warning Tape, Insulation Supportor and Silicon core pipe should be the selected from the CPP ‘s vendor list (see attachment - 6).
(6) Other requirements: Bidders shall not be included in the blacklist, have the bidding qualifications suspended or cancelled, or be prohibited from access by China National Petroleum Corporation / China Petroleum Pipeline Engineering Co., Ltd.
4. Acquisition of Tendering Documents
Time of receiving the tendering documents: AM 9:00 on 7th February, 2025 to PM17:00 on 14th February, 2025. (Abu Dhabi time, the same below).
Those who intend to participate in the bidding，Please contact with Ms Zhao Rui to obtain the tendering documents.
Contact person: Ms Zhao Rui
Tel：*****-*********
E-mail: zhaorui@enlinkenergy.com
5. Submission of Bidding Documents
Bidding documents shall be composed of two components, “Technical proposal” and “Commercial proposal”
The Technical proposal shall be submitted to biddingtechnical4@enlinkenergy.com before 9:00 AM on 18th February, 2025 (Abu Dhabi Time).
The Commercial proposal shall be submitted to bidcommercial4@enlinkenergy.com before 9:00 AM on 18th February, 2025 (Abu Dhabi Time). The Commercial Proposal shall be encrypted. The encrypted password shall be sent to the email box separately: password@enlinkenergy.com.
The overdue delivery of the bid documents will be rejected, and the delivery time shall be subject to the time of designated email ID.
6. Bid Opening
Time: 9:00 AM on 18th February, 2025 (Abu Dhabi Time);
Place: 50th Floor, Addax Office Tower, Al Reem Island, Abu Dhabi, UAE, Po Box ******
7. The media of the announcement
This tender announcement is issued on: https://www.cnpcbidding.com/
8. Confirmation on Invitation to Bid
Upon receiving the Invitation to Bid, please confirm whether or not to participate in the present Tendering by email before PM 17:00 on 15th February, 2025. (Abu Dhabi Time). For the format of Confirmation Letter for Invitation to Bid, please refer to the appendix. Email address:zhaorui@enlinkenergy.com.

Tenderee: China Petroleum Pipeline Engineering Co., Ltd. Iraq Branch.
Contact person：Mr Zhao Rongfan
Tel: +86-156*****553
Email: zhaorongfan@cppscm.com

Tendering Agent: China petroleum pipeline material and equipment CO.,LTD.
Address: 50th Floor, Addax Office Tower, Al Reem Island, Abu Dhabi, UAE, Po Box ******.
Contact person: Ms Zhao Rui
Tel：*****-*********
E-mail:zhaorui@enlinkenergy.com