| Shanghai International Tendering Co., Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2018-04-16. |
| 1.Bidding Conditions |
| Overview：Analytical instrumentation kits |
| Source of Funds：The source of funding for this tender has been implemented. |
| Description of The Prepared Bidding Conditions：The source of funding required for this tender has been implemented. The bidding documents have been improved and the bidding conditions have been met. |
| 2.Bidding Content： |
| Bidding No：****-********5802/01 |
| Project Name：Analytical test instruments |
| Place of Implementation：Shanghai |
| List of Products： |
| NO. | Product Name | Quantity | Main Technical Data | Remarks |
|---|
| 1 | Package One:Rapid Solvent Extractor | one set | 2.2 Performance Indicators * 2.2.1 One set of equipment can complete the extraction of six samples at a time (within 20-30 minutes), and 96 samples can be processed within 8 hours to ensure the timeliness of the sample (the processing can be completed on the same day); * 2.2.2 Temperature setting range: 30-200？C; Pressure setting range: 50-150bar; Both parameters can be adjusted by users to facilitate the development of new extraction methods. * 2.2.3 Device configuration Chinese LCD operation panel can directly display the extraction process graphics, extraction parameters, working status and parameters of each position; the device itself can store no less than 100 kinds of extraction programs and 20 kinds of solvent information (10 of which are fixed Solvents, 10 types of solvents for the customer"s own; a unique Eco function mode, automatic shutdown of the heating function after the completion of the extraction, save energy, cost and ensure safety. *2.2.6 Collector is directly compatible with 1ml quantitative concentrator tube. It can be evaporated and concentrated on multi-sample rapid concentrator without transfer of sample. Rotary flask can be directly used. Concentration with rotary evaporator does not need to transfer sample to prevent extract transfer. Loss, maximum extraction volume 240ml sample. *2.2.10 There are only 4 seals above and below the single extraction cell, which greatly reduces the loading time. Different extraction pool consumables generally reduce the experimental cost. Instrument embedded sealing ring, extraction tank automatic sealing technology to ensure the consistency of the seal, to avoid leakage caused by manual manual operation and error; 2.3 Basic configuration: 2.3.1 Parallel Fast Solvent Extractor (set) 2.3.1.1 Stainless steel extraction tank (40m, with screw plug and metal filter) 30 2.3.1.2 Extraction Cell Holder (6-digit) 5 2.3.1.3 Collection Bottle 240ml (with cap and spacer) 12 2.3.1.4 Sampling Tool Box: Includes Plunger and Brush, Clip and Funnel, etc. 2.3.1.5 Up and Down Spare Seals Each of 12 2.3.1.6 200 pieces of paper filter 2.3.1.7 25 metal filter plates 2.3.1.8 Spare screw plug 2 2.3.1.9 Joints and ferrules of each 10 2.3.1.10 Suction filter 2 2.3.1.11 FEP tube 5 meters 2.3.1.12 Solvent Bottle (1L) 1 2.3.1.13 Quartz sand 2.5kg 2.3.1.14 Diatomite 1kg for Drying and Mixing Samples | Budget: RMB 620,000 Budget Number: 18-07520 | | 2 | Package Two:Purge trap | one set | 1 trap *1.2 Trap heating method: The trap wall is a self-heated direct resistance heating material (non-conductive heating method), *1.3 Maximum operating temperature: ≥420°C. *2.1 Cyclonic water removal device adopts the temperature difference + density difference dehydration method. It does not dehydrate during purging, and ensures that all purging products directly enter the trap and dehydrate at room temperature to avoid adsorption of VOCs by cryogenic cold traps. Do not use dehydration adsorption material, will not absorb VOCs substances including polar substances. Due to the high dehydration efficiency, there is no need to use a dry blowing process to extend the life of the trap. *3.1 Heater: infrared purge tube sample heater. *4.1 Standard Foam Filter (Upgradable tertiary foam protection device, including foam sensor, foam breaker and foam filter, to prevent pipeline pollution. Foam crushing uses hot metal tip to pierce foam without external anti-foaming agent Prevent pollution.) *5.2 Trap: Room temperature to above 420°C (temperature control during purging, desorption, and baking). *6.5 250 operating methods can be programmed and stored. *7.3 It can be used to connect 2 units of purge and trap. *7.4 Standard with 2 internal standard/alternative standard addition modules, up to 4 optional. *8.1 Computer Desktop 1 Configuration: I7 CPU, 1T hard drive, 8G memory, 23-inch monitor, independent 2G memory Dual NIC interface (compatible with two network ports) | Budget: RMB 590,000 Yuan Budget No.: 18-07519 | | 3 | Package Three:Gas chromatography mass spectrometry | one set | 1.1 Gas chromatography-mass spectrometer *1.1.2.3 Pressure Setting Range: 0～100Psi, Accuracy 0.001Psi *1.1.3.3 Minimum Detection Limit: <1.4 pg Carbon/sec (Propane) *1.1.3.5 Maximum Data Acquisition Rate: 500Hz *1.2.3 Analyzer: The overall gold-plated quartz hyperboloid quadrupole, independent temperature control (106 ~ 200) °C *1.2.8 Sensitivity: Full scan sensitivity (electron bombardment source EI): 1pg octafluoronaphthalene (OFN), signal/noise ratio: ≥1500:1 Select ion detection (electron bombardment source EI) Minimum detection limit: 10fg *1.2.10 Maximum scan rate: Not less than 20,000 amu/s *1.2.12 Select ion pattern detection (SIM) up to 100 groups with up to 60 ions per group *1.1.4.1 Sample injection number: more than 165 bits *2.3 Computers and Printers Computer desktop 1 Configuration: I7 CPU, 1T hard disk, 8G memory, 23-inch monitor, independent display 2G memory with dual network interface (compatible with two network ports) Multi-function Printer 1 set: Double-sided printing, support network interface, support for copying, scanning function *3 Information and Training 3.1 The supplier shall provide certified product certification documents that can prove that the equipment meets the standards 3.2 The supplier should provide a detailed instrument instruction manual or operation manual 3.3 The supplier must have an analysis instrument education center in the country to provide three days of system gas chromatograph-mass spectrometry training for each instrument, providing users with basic theory, operation, daily maintenance and basic analytical instrument theory courses. | Budget: RMB 780,000 Budget Number: 18-07521 |
|
| 3.Qualification Requirements For Bidder |
| Qualifications or Performance：1) Must be a legal person or other organization with an independent legal personality and have a corresponding business scope; 2) The bidder shall be the manufacturer of the bidding equipment and consumables or the only agent authorized to participate in the bidding of the project through the formal sales system of bidding equipment; 3) According to the "Shanghai Municipal Government Procurement Vendor Registration and Integrity Management (Provisional) Measures" registered suppliers to the warehouse (this clause applies only to agents in China); 4) The Bidder shall provide an online platform for the provision of public service and administrative supervision for the international tendering and bidding of mechanical and electrical products designated by the Ministry of Commerce before the deadline for submission of bids (hereinafter referred to as the bidding website at http://www.chinabidding.com ) Finish valid registration. |
| Joint Bids：NOT Available |
| Bid without the bidding documents：NOT Available |
| 4.Acquisition of Bidding Documents |
| Beginning of Selling Bidding Documents：2018-04-16 |
| Ending of Selling Bidding Documents：2018-04-23 |
| Sell biddingdoconlineornot：No |
| To Obtain：On-site Purchase |
| Place：14th floor, Meiyuan Building, No. 358 West Yan"an Road, Shanghai, China |
| Price of Bidding Documents: ￥300/$50 |
| Additional Instructions： |
| 5.Bid Submission |
| Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)：2018-05-08 10:00 |
| Place of Bid：The first meeting room of Shanghai International Tendering Co., Ltd. on the 14th floor of Meiyuan Building, No. 358 West Yanan Road, Shanghai, China (or other meeting rooms displayed on the display of the elevator hall on the 14th floor of the day) |
| Place of Bid Opening：The first meeting room of Shanghai International Tendering Co., Ltd. on the 14th floor of Meiyuan Building, No. 358 West Yanan Road, Shanghai, China (or other meeting rooms displayed on the display of the elevator hall on the 14th floor of the day) |
6.The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on
www.chinabidding.com. |
| 7.Contact Details |
| Purchasers：Shanghai Academy of Environmental Sciences |
| Add.：508 Qinzhou Road, Shanghai |
| Contact：Zhang Hai Rong |
| Tel：86-21-********-**** |
| Bidding Agency：Shanghai International Tendering Co., Ltd. |
| Add.：14th floor, Meiyuan Building, No. 358 West Yan"an Road, Shanghai, China |
| Contact：Xu Di/ Ruan Xiang Ru |
| Tel ：86-21-********×120、199 |
| 8.Remittance Approach |
| Bank(RMB):China Merchants Bank Shanghai Branch Caojiadu Branch |
| Bank(USD):PING AN BANK CO., LTD |
| Account NO.(RMB):*************** |
| Account NO.(USD):********81394 |
