悬梁厢式压滤机成套设备招标公告

悬梁厢式压滤机成套设备招标公告



悬梁厢式压滤机成套设备项目招标公告
发布日期:2018-10-22
招标编号:****-*******GA475
上海宝华国际招标有限公司(以下称招标机构)受宝山钢铁股份能环部(以下称买方)委托,就其悬梁厢式压滤机成套设备项目所需的下列货物进行国际公开招标,邀请合格投标人进行网上电子投标。
1.招标货物名称、数量、技术规格和资金来源:
1)货物名称:悬梁厢式压滤机成套设备;
2)数量:5台;
3)主要技术参数: 压滤机处理介质为经辐流沉淀池浓缩后的OG泥浆,该物料相关参数如下:脱水前泥浆浓度:15~25%(重量比)[此处浓度、比重和温度再确认~]脱水前泥浆比重:  约2.0 t/m3泥浆温度:30~50℃PH值: 10~13脱水机工作时间:每天24小时 污泥化学分析百分组成:污泥中40~66%为铁的氧化物,其余为石墨粉以及硅、钙、镁的氧化物,粒度分布为:10~40μm, 11%;40~60μm,13%;>60μm,76%,钙硬度:500-1000ppm(最高2000ppm)。(其它详见招标技术文件);
4)资金来源:自筹资金(现汇项目);
2.交货地点和交货时间:
1)交货地点:上海港
2)交货时间:要求在合同生效后6个月FOB
3.*凡确认投标的投标人,务必在开标前注册为其会员并通过年检以获得投标资格,中标情况将在公示。
4.宝华国际招标网(http://www.baosteelbidding.com)可同时提供我公司的招标项目信息(邀请招标除外),有兴趣的投标人可以登录查看。登录后,投标人可在宝华国际招标网上在线购买招标文件,进行投标和开标活动。
5.购买招标文件时间:
1)购买招标文件时间:2018-10-22~2018-10-29(每天9:00-11:00,13:00-16:00,节假日除外)
6.招标文件售价:招标文件英文版及中文版一套(电子版),若中文和英文版有冲突以中文版为准。
售价为人民币1500元或200美元整。
招标文件均按包进行计价出售,投标人成功购标后,自行下载招标文件和投标文件模板。招标文件一经售出不得退还。
7.投标截止时间和开标时间:
1)投标截止时间:2018-11-13 09:10(北京时间)。投标人应于投标截止时间前在宝华电子招标网成功递交所有电子投标文件。
8.开标方式:
电子一步法
9.开标信息:
1)开标时间:同投标截止时间(北京时间)。
2)开标地点:宝华招标网本项目开标大厅
10.*投标条件及资格要求:
1)投标条件及资格要求:(1)投标商应具有本标书的设计能力和设备成套能力,须具有在大型钢铁企业炼钢(单台转炉≥120吨)OG系统使用悬梁厢式压滤机二年以上的成功业绩,并对设备的使用性能、使用安全性和可靠性、设备质量、供货的完整性、安装指导及调试负责。(2)投标商应提供在大型钢铁企业炼钢(单台转炉≥120吨)OG系统使用二年以上的成功业绩的相关证明文件(用户证明或合同复印件)。(3)投标商所提供压滤机及其所用的设备和材料(包括液压站、液压缸、液压油管、钢材、滤板、滤布等)原产地应为美国、欧洲。投标人必须是制造商,所投标的压滤机必须在品牌原产国成套。投标人必须有外汇签约资质。(4)投标商需出具承诺函,承诺在供货时提供美国或欧盟出具的原产地证明,并提供材料原厂(包括液压站、液压缸、液压油管、钢材、滤板、滤布等)提供的出厂检测报告,钢部件需出具出厂材质检测报告。
11.联合体投标:
本项目不允许联合体投标
12.客服热线:0086-400-821-0772(有关投标人CA办理事项的咨询)
传真:0086-21-********
网上购标方法:具体操作方法详见宝华招标网“操作指南”。
项目经理:夏雪明(有关招标项目商务、技术问题可致电项目经理。)
电 话:********
传真:********
电子邮件:137*****770@163.com
业务助理:方小慧
电话:***-********
招标机构地址:上海市宝山区克山路550弄果园公寓8号楼
邮编:201999
收 款 人:上海宝华国际招标有限公司
开户银行:建行宝钢宝山支行
人民币银行账号:****************9757
欧元银行账号:****************0041
美元银行账号:****************0041
日元银行账号:****************0041
Swift Code:PCBCCNBJSHX
Issue Date:2018-10-22
Tendering No.:****-*******GA475
baohua(Hereinafter referred to as Tendering Agency)is commissioned by(Hereinafter referred to as tenderer)on international open bidding for the following goods required in Cantilever Box Type Filter Press and invites eligible bidders to online e-bidding。
1.The name, quantity, technical specifications and fund sources of goods for tendering:
1)The name:Cantilever Box Type Filter Press;
2)Quantity:5set;
3)Technical specifications: The treatment medium of the filter press is OG sludge concentrated by radial sedimentation tank. The relevant parameters of this material are as follows:Sludge concentration before dehydration:5~25% (weight ratio)[Concentration, proportion and temperature shall be re-confirmed.]Sludge proportion before dehydration: Approx. 2.0 t/m3Sludge temperature: 30~50℃PH value: 10~13Working hours of dehydrator: 24 hours / day Chemical analysis percentage composition of sludge: 40~66% of the sludge is iron oxide, the rest is graphite powder, silicon, calcium and magnesium oxide, and the particle size distribution is: 10~40μm, 11%; 40~60μm, 13%; >60μm, 76%, calcium hardness: 500-1,000ppm (max. 2,000ppm);
4)Fund sources of goods:Self-raised funds(Cash items);
2.Delivery time and place:
1)Delivery place:shanghai
2)Delivery time: FOB within 6 months after the contract comes into force
3.*The bidders who have confirmed to participate the bid must log on China International Bidding Website),and register. Please make sure you have registered and passed through the annual review before bidding. The awarding will be publicized on China International Bidding Website.
4.Baohua E-bidding website http://www.baosteelbidding.com)could also provide the information about tendering project of our company (except invitation of tendering), interested bidders may login to view relevant information. After login, the bidder could purchase tendering document and bid online.
5.Time for purchasing Tendering Documents:
Time for purchasing Tendering Documents:2018-10-22~2018-10-29(9:00 -11:00, 13:00-16:00 each day, except for holidays).
6.Sales prices of the tendering document:One complete set of Tendering Documents both in English and Chinese ( electronic version included). The Chinese language shall govern in case of any discrepancy between Chinese language and the English language.
Sales price is CNY 1500 or USD 200。
All tendering documents will be sold per bid package (or section). After purchasing the bid, the bidder can download the tendering document and the template of bidding document. The tendering documents sales are non-refundable.
7.Deadline for bid submission and Bid Opening Time:
1)Deadline for bid submission and Bid Opening Time:2018-11-13 09:10(Beijing time). The bidder shall submit all bidding documents on Baohua tendering website before the bidding deadline.
8.Bid opening style:
E-biddingOne-step of opening
9.Biding opening place:
1)Bid Opening Time:2018-11-13 09:10
2)E-Biding opening place:Bid opening hall on Baohua Tendering net
10.*Requirements of Bidder’s qualification:
1)Requirements of Bidder’s qualification:(1)The bidder shall be provided with the design capacity and the ability of equipment assembly under this document, with more than two years of successful performance of the cantilever box type filter press in OG system of steelmaking in large iron and steel enterprises (single converter≥120 tons), and be responsible for equipment performance, safety and reliability, equipment quality, supply integrity, installation guidance and commissioning.(2)The bidder shall provide relevant supporting documents (user certificates or copies of the contract) for the successful performance of the OG system used for more than two years in the steelmaking (single converter ≥120 tons) of large iron and steel enterprises.(3)The filter press provided by the bidder and the equipment and materials (including hydraulic station, hydraulic cylinder, hydraulic tubing, steel, filter plate and press cloth) uses shall be originated from the United States and Europe. The bidder shall be the manufacturer and the filter press in the country of origin of the brand. The bidder shall be provided with the foreign exchange signing qualification.(4)The bidder shall issue the undertaking letter, undertaking to provide the certificate of origin issued by the United States or the European Union at the time of supply, and provide the factory inspection report of the original material (including hydraulic station, hydraulic cylinder, hydraulic tubing, steel, filter plate and press cloth), and the steel parts shall be provided with the report of factory test before shipping.
11.Bidding consortium:
This project no consortium bidding is accepted
12.Customer service hotline:0086-400-821-0772 (consulting for bidders CA affairs)
Fax:021-********
Online tendering document purchase:please refer to "HELP" for details on Baohua tendering website.
Bid manager:Xia Xueming(contact project leader for commercial, technical problems of tendering project)
Tel:********
Fax:********
E-mail:137*****770@163.com
Business assistant:Fang Xiaohui
Tel:***-********
Bid agency address:No.8, 550 Long KeShan Road, Bao Shan District,Shanghai, China
Post code:201999
Beneficiary: Shanghai Baohua International Tendering Co., Ltd.
Bank account:China Construction Bank Baoshan Branch
RMB Accounting Number:****************9757
EUR Accounting Number****************0041
USD Accounting Number:****************0041
JPY Accounting Number:****************0041
Swift Code:PCBCCNBJSHX

联系人:郝工
电话:010-68960698
邮箱:1049263697@qq.com

标签: 成套设备 厢式压滤机

0人觉得有用

招标
业主

-

关注我们可获得更多采购需求

关注
相关推荐
 
查看详情 免费咨询

最近搜索

热门搜索