江西江钨硬质合金有限公司引进水洗超声波清洗机和碳氢超声波清洗机设备项目（第二次）国际招标公告
江西江钨硬质合金有限公司引进水洗超声波清洗机和碳氢超声波清洗机设备项目（第二次）国际招标公告
江西省机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标于2019-4-26在公告。本次招标采用传统招标方式，现邀请合格投标人参加投标。
一、招标条件
1、项目概况：该设备为招标人生产自用
2、资金到位或资金来源落实情况：招标人自有资金
3、项目已具备招标条件的说明：项目已经批准
二、招标内容：
1、招标项目编号：****-********2003/03
2、招标项目名称：江西江钨硬质合金有限公司引进水洗超声波清洗机和碳氢超声波清洗机设备项目（第二次）
3、项目实施地点：江西靖安
4、招标产品列表（主要设备）：
序号 | 产品名称 | 数量 | 简要技术规格 | 备注 |
1 | 水洗超声波清洗机 | 1台 | 用于硬质合金刀片的表面清洗、漂洗、干燥，需方工件是放在382mm*280mm的标准manz托盘里清洗，清洗篮和设备的各清洗槽都应按照该manz托盘设计。 | 其他技术要求详见招标文件 |
2 | 碳氢超声波清洗机 | 1台 | 用于硬质合金工具的涂层前机加工油料、切屑颗粒表面清洗处理，能实现PVD、CVD涂层前工件的全自动表面除油脱脂、去除金属屑等清洗工艺 | 其他技术要求详见招标文件 |
三、投标人须具备的资格或业绩：
1）投标人（仅针对国内代理商）须提交有效的企业法人营业执照原件或复印件加盖单位公章，其经营范围涵盖所投标货物内容；
2）代理商投标时须具有制造商针对本项目的唯一授权书原件。
3）投标人开户银行在开标日前三个月内开具的银行资信证明原件或复印件；
是否接受联合体投标：否
未领购招标文件是否可以参加投标：否
四、招标文件的获取
招标文件领购开始时间：2019年4月26日
招标文件领购结束时间：2019年5月7日
获取招标文件方式:现场领购
招标文件领购地点：江西省机电设备招标有限公司招标二部
招标文件售价：每份1000元人民币或150美元；
其他说明：招标文件领购后不退。节假日不领购。
五、投标文件的递交
投标截止时间（开标时间）：2019年5月21日9:30时
投标文件送达地点：江西省机电设备招标有限公司七楼第一开标大厅
开标地点：江西省机电设备招标有限公司七楼第一开标大厅
六、投标人在投标前需在上完成注册。评标结果将在公布。
七、联系方式
招标人：江西江钨硬质合金有限公司
地址：江西靖安县工业园
联系人：余莹
联系方式：+86-135*****797
招标代理机构：江西省机电设备招标有限公司
地址：南昌市省政府大院北二路92号咨询大厦二楼202室
联系人：姚先生
联系方式：电话：+86-***-********邮箱：jxtc1106yaochao@163.com
八.汇款方式
户名：江西省机电设备招标有限公司
开户银行（人民币）：中信银行南昌分行营业部(注：人民币境内账户，不接受境外汇款)
开户银行（外币账户）：中行江西省分行
账 号：********5545（美元）
********5543（欧元）
********5549（日元）
Jiangxi Machinery & Electric Equipment Tendering Co., Ltd, for and on behalf of the Tenderee, will hold international open competitive tender for the following products and services, which will be announced athttp:///in 2019-April-26th . This tender will be implemented in the traditional way. The eligible tenderers are hereby invited to participate in the tender.
1. Terms of bidding
Project profile: the equipment is used by the tenderee itself for production.
Capital preparation or capital source checking information: the tenderee’s owned fund
Description about project’s qualification for tendering: already approved
2. Bidding content:
IFB No.：****-********2003/03
Project Name：Procurement of the Water Washing Ultrasound Cleaner and Hydrocarbon Ultrasonic cleaner for Jiangxi JiangWu Cemented Carbide Co.,LTD（the second tendering）
Project Location：.Jing an city, Jiangxi Province,China.
List of tendering products (main equipment):
No. | Name of Product | Quantity | Brief Technical Specification | Remarks |
1 | Water Washing Ultrasound Cleaner | 1 set | For surface cleaning, rinsing and drying of cemented carbide blades, the workpieces are cleaned in a tray (standard Manz) of 382 mm*280 mm. Each cleaning tanks and cleaning basket should be designed according to the Manz tray. | See Details in the technical specifications and requirements of bidding document |
2 | Hydrocarbon Ultrasonic cleaner | 1 set | It can be used to clean the surface of oil and chips before coating of cemented carbide tools. It can achieve the automatic cleaning to wipe out surface degreasing and metal dross of the workpieces before PVD and CVD coating process. |
3. Qualification and performance requirements of tenderers
1) The bidder (if the bidder is Agent in domestic ) must present the valid original business license or the copies with official seal on which the business range cover the contents of the bid.
2) The original exclusive authorization letter issued by the manufacturer for this project is also should be provided (if the bidder is the Agent in domestic).
3) The Bidder shall provide the bank reference letter issued within three (3) months prior to the time of bid opening in original or its copy;
Is Consortium Bid accepted: NO
Whether the bid can be participated in without purchasing bidding document: no
4. Obtaining of the bidding document
Beginning time of purchasing the bidding document: April-26th, 2019
Deadline of purchasing the bidding document: May -7th, 2019
Obtain tender documents: on-site purchase
Location of collecting the bidding document：No.2 Tendering Department of Jiangxi Machinery & Electric Equipment Tendering Co., Ltd.
Sales price of the bidding document: upon non-refundable payment of CNY￥1000 or USD$150.
Other notes:. No purchasing is available during holidays and festivals, and no refund after sale.
5. Submission of Bidding Documents
Deadline for bid submission (Bid Opening)：9:30 May 21th ,2019
Address for bid submission:the first bid opening hall on the 7th floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
Place for Bid Opening：the first bid opening hall on the 7th floor of Jiangxi Machinery &Electric Equipment Tendering Co., Ltd.
6.The bidders should complete their registry onhttp://before the deadline of bids submission. The bidding results will be publicized onhttp://afterwards.
7.Contact Information
Tenderee: Jiangxi JiangWu cemented carbide co.,LTD
Address: County Industrial Park ,Jing’an city, Jiangxi Province,China.
Contact：Mrs Yu
Tel：+86-135*****797
Tendering Agent: Jiangxi Machinery & Electric Equipment Tendering Co., Ltd.
Address: Room 202, 2/F, No.92, bei’er Road, Jiangxi Provincial Government Courtyard, Nanchang, China
Contact: Mr Yao
Tel：+86-***-******** Email:jxtc1106yaochao@163.com
8.Banking Information
Opening Bank of the Tendering Agent (Domestic Account of CNY):Sales Department of Nanchang Branch of CITIC Bank
Account No: ********147*****914
Opening Bank of the Tendering Agent (For Foreign currency):Bank of China, Jiangxi Branch.
Account No.:********5545（USD）
Account No.: ********5543（Euro）
Account No.: ********5549（Japanese yen）
|
招标
|
江西省机电设备招标有限公司 关注我们可获得更多采购需求 |
关注 |
最近搜索
无
热门搜索
无
